帶孔山字形硅鋼片沖壓模具設計-E形墊片落料沖孔復合模、寬50高25含4張CAD圖
帶孔山字形硅鋼片沖壓模具設計-E形墊片落料沖孔復合模、寬50高25含4張CAD圖,帶孔山,字形,硅鋼片,沖壓,模具設計,墊片,沖孔,復合,50,25,cad
摘要
沖壓模具在實際工業生產中應用廣泛。在傳統的工業生產中,工人生產的勞動強度大、勞動量大,嚴重影響生產效率的提高。隨著當今科技的發展,工業生產中的模具的使用已經越來越引起人們的重視,而被大量應用到工業生產中來。沖壓模具的自動送料技術也投入到實際生產中,沖壓模具可以大大的提高勞動成產率,減輕工人的負擔,具有重要的技術進步意義和經濟價值。
本文對冷沖壓技術的分類、特點及發展方向作了簡略的概述:論述了沖壓零件的成形原理、基本模具結構與運動過程及其設計原理;對典型的沖壓件零件進行了設計:此設計解決了沖壓模具的加工難題,沖壓模具的設計充分利用了機械壓力機的功用特點,在室溫的條件下對坯件進行沖壓成形,生產效率高,經濟效益顯著。
關鍵詞:沖壓、模具、模具設計、工藝
Abstract
Punching die has been widely used in the actual industrial production. In traditional industrial production,the worker work hard ,and there are too much works,so the efficiency is low.With the development of the science and technology nowdays,the use of punching die in the industial production gain more attention,and be used in the industrail production more and more.Self-acting feed technology of punching die is also used in production,punching die could increase the efficience of production and could alleviate the work burden,so it has signification meaning in technologic progress and economic value.
The article mainly discussed the classification,feature and the developmental direction of the punching technology. Elaborated the punching comonents formation principle, the basic dies structure and the rate process and the principle of design; and designed some conventional punching die : the die for big diameter three direction pipe which solved the problem of traditional maching, the darwing and punching compound die with float punch-matrix, the drawing and cutting compound dies with unaltered press, the compound die for the back bowl of the noise keeper, the design of the compound die which could produce two workpieces in one punching, the bending die for ring shape part , the bending die which used the gemel, automate loading die for cutting, the drawing, punching and burring compound die with sliding automated loading, the punching die for the long pipe with two row of hole, the drawing die for the square box shape workpiece and the burring die for the box shape workpiece .
KeyWord: punching, die, die design, punching, bending, drawing
目錄
摘要 1
Abstract 2
目錄 3
第1章 緒論 5
1.1 模具選材的意義 5
1.2 模具選材的原則 6
1.3 冷沖壓模具的選材原則 8
第2章 零件的分析 10
2.1 零件的工藝性分析 10
2.2 工藝方案比較及確定 10
2.3 沖壓工藝與模具設計的內容及步驟 11
2.4 零件及其沖壓工藝性分析 12
2.5 搭邊 12
2.6 送料進距 12
2.7 條料寬度 13
2.8 排樣設計與計算 13
2.9 計算沖壓力與壓力中心,初選壓力機 14
2.10 計算凸、凹模刃口尺寸及公差 14
第3章 確定模具總體結構方案 15
3.1 模具類型 15
3.2 操作與定位方式 15
3.3 卸料方式與出件方式 15
3.4 模架類型及精度 15
3.5 模具的失效形式 16
3.6 提高模具壽命的途徑 17
3.7 零件的技術要求 19
3.8 裝配技術要求 20
3.9 模具安裝要求 21
3.10 沖裁模具的試沖 21
結論與展望 25
致謝 27
參考文獻 28
收藏