喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
感溫卡沖壓模設計
摘 要：本設計題目為彎曲件模具設計，體現了典型彎曲模的設計要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了設計者彎曲模設計的基礎知識，為設計更復雜的彎曲模具做好了鋪墊和吸取了更深刻的經驗。
本設計主要是沖裁，切斷，彎曲，需要計算沖裁、彎曲時的間隙，工作零件的圓角半徑，尺寸和公差，并且還需要確定模具的總體尺寸和模具零件的結構
本設計運用彎曲成型工藝及模具設計的基礎知識，級進模具有生產效率高，制件精度高等特點，特別適合大批量高精度生產故模具采用連續沖裁，彎曲一模成形。
關鍵詞：沖裁 彎曲模 凸模 凹模
Temperature of the card design and manufacture of molds
Abstract：The requirement，content and direction of the design of the bending dies parts are embodied on this bending dies design. The designer’s foundation knowledge of the bending dies design is reinforced and is able to design more complex injection mould through the design.
The fundamental steps in shearing or cutting .the pressure applied by the punch on the metal tends to deform it into the die opening .By stepping punches ,they can cut individually.
Through the foundation knowledge, Swing block compound die is used in this design to form the part.the compound die can produce pierced blanks to close flatness and dimensional tolerances. Especially fit for volume produce and hight precision produce.Moulding of the part is like this : So, it is adapted to be used on this mould extraordinarily.
Keywords: block ,bending dies , punch , dieg,