40000Nm3h變換氣MDEA法脫碳車間工藝設計含2張CAD圖

40000Nm3h變換氣MDEA法脫碳車間工藝設計含2張CAD圖,nm3h,換氣,mdea,脫碳,車間,工藝,設計,cad 40000Nm3/h變換氣MDEA法脫碳車間工藝設計 摘要：本設計首先綜述了國內外合成氣脫碳工藝及其發展前景。在對各種脫碳工藝進行詳細比較的基礎上，選擇使用活化MDEA法脫除變換氣中的CO2。脫碳后的富液通過熱水蒸氣再生后回收利用。在物料衡算和熱量衡算的基礎上，進行了主體設備吸收塔的設計、輔助設備選型以及車間布置等，完成了40000Nm3/h變換氣脫碳工段工藝設計。另外還繪制了主體設備圖、工藝流程圖及車間布置圖。最后，對整個工藝方案進行了經濟、環保和安全評估，該工藝設計經濟合理，達到了節能、降耗、減排的要求。 關鍵詞：變換氣，MDEA，脫碳，工藝設計 The process design of decarburization from the 40000Nm3 / h shift gas Abstract：Firstly, domestic synthetic gas decarburization process and its development prospects are represented. By a detailed comparison of various decarburization processes , The method of MDEA is chosen to absorb CO2 form shift gas. The rich fluid after goes through the thermal vapor for recycling, generating CO2 meanwhile. Based on the material balance and heat balance , the design of the main equipment, auxiliary equipment selection and facility layout are done. Then 40000Nm3 / h shift gas decarburization section in process design is completed. Additionally, the map of main equipment, process flow diagrams and plant layout are achieved. Finally, the economic, environmental and safety assessments of the whole process show that the process design achieves energy conservation and emission reduction requirements. Keywords: the shift gas, MDEA, decarburization, process design