喜歡就充值下載吧。。。資源目錄里展示的全都有,,下載后全都有,,請放心下載,原稿可自行編輯修改 【QQ:414951605 可咨詢交流】=====================
喜歡就充值下載吧。。。資源目錄里展示的全都有,,下載后全都有,,請放心下載,原稿可自行編輯修改 【QQ:1304139763 可咨詢交流】=====================
喜歡就充值下載吧。。。資源目錄里展示的全都有,,下載后全都有,,請放心下載,原稿可自行編輯修改 【QQ:1304139763 可咨詢交流】=====================
摘 要
本次畢業設計的主要任務是對風扇固定蓋注射模具的設計,也就是設計一副注塑模具來生產風扇固定蓋的塑件產品,以實現自動化提高產量。該課題從產品結構工藝性,具體模具結構出發,對模具的澆注系統、模具成型部分的結構、頂出系統、冷卻系統、注塑機的選擇及有關參數的校核、都有詳細的設計。本次設計的主要難點有:由于塑件為風扇固定蓋內壁上有螺紋,考慮自動脫螺紋機構,因而模具結構較復雜,為了提高零件的表面質量,采用單分型面?zhèn)葷部凇?
關鍵詞:注塑模 風扇固定蓋 單分型面 側澆口
ii
ABSTRACT
This graduation design is the main task of the internal screw thread bottle cap mould design, also is to design a pair of injection mold for manufacturing the plastic screw thread bottle cap in product, in order to realize the automation to increase production. The subject from the product structure craft, specific die structure, the mould of gating system, molding part of the structure, the ejector system, cooling system, selection of injection molding machine and related parameters of checking, there are detailed design. The main difficulties of this design are: due to the plastic parts of screw thread bottle cap in outside wall have threaded, consider automatically take off thread mechanism, and the die structure is relatively complex, in order to improve the surface quality of parts, with double parting surface gate set
Key words: injection molding ;screw cap;inside the double parting surface;The side gate