喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改【QQ：1304139763 可咨詢交流】=====================
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改【QQ：414951605 可咨詢交流】=====================
車輛與動力工程學院畢業設計說明書
柴油動力ＳＵＶ車設計—變速器及操縱機構設計
摘要
汽車變速器的主要用途是改變發動機輸出的扭矩和轉速，使之能夠?qū)崿F(xiàn)變速行駛、倒退行駛，并且能夠使駕駛員在不必停止發動機工作就能停車和停車時不必停止發動機動作的要求。
本設計是設計一款能滿足整車要求，即規定最高車速、最大扭矩、最大功率等要求的 SUV車變速器。通過分析各類型變速器的的結構及性能，最終確定此變速器為中間軸式帶副箱的5+1檔變速器，即有五個前進檔（包括超速檔）和一個倒檔，為了與整車相配，通過設計與計算得應該采用直接操縱機構。
通過傳動效率和傳動比的設計計算初步確定變速器主要尺寸，再通過接觸強度和彎曲強度計算進一步確定齒輪、軸、同步器等零部件的尺寸及材料。從而也可以估算出軸承等元件的壽命。
根據整車、離合器、汽車橫梁及傳動軸等的形狀結構可以確定變速箱箱體形狀，也可以確定變速箱與各相鄰部分的連接方法及結構。確定變速器的位置及連接時應該使變速器處于駕駛員最佳換檔位置。
關鍵詞：變速器，SUV，材料，傳動比，強度
Transmission diesel SUV design
ABSTRACT
Automotive Transmission of the main purposes is to change the engine output torque and speed, so that it will be able to achieve speed and backwards motion, and the driver can not stop the engine work will stop and when not to stop parking engine moves the request.
This section is designed to meet the whole car requirements, which require maximum speed, maximum torque, the maximum power requirements of the SUV vehicle transmission. By analyzing various types of transmission of the structure and properties, This final coaxial transmission belt for the middle Vice box stall Transmission 5 +1, that is, five ahead stalls (including speeding stalls), and a Reverse.
To match with the vehicle, through the design and calculation should be used in the direct control agencies.
Through the transmission efficiency of the transmission ratio and the calculation of the initial design of the main transmission to determine size, Then contact strength and bending strength calculation further define the gears, shafts, and other parts Synchronizer size and materials. Thus can be estimated bearings and other components of life.
According Vehicle, Clutch, motor and transmission beams and other structural shapes can be identified gearbox box shape, Transmission also can be identified with the adjacent part of the connection method and structure. Transmission to determine the location and connection should make the driver in the best transmission shift position
KEYWORDS : Transmission, SUV, Material, transmission ratio，Strength
目 錄
第一章 前言......................................1
第二章 方案選擇..................................2
§2.1概述...................................... 2
§2.2變速器傳動機構布置方案.....................3
第三章 變速器主要參數的初選......................4
§3.1擋數.......................................4
§3.2傳動比范圍.................................4
§3.3中心矩.....................................4
§3.4外形尺寸...................................5
§3.5齒輪參數...................................5
§3.5.1一擋齒輪各參數的計算...................5
§3.5.2直接擋齒輪各參數的計算.................7
§3.5.3其它前進擋齒輪參數的計算...............8
§3.5.4倒擋齒輪各參數的計算...................9
第四章 變速器的計算與校核.......................10
§4.1齒輪強度計算..............................10
§4.2軸的強度計算..............................14
§4.2.1軸的受力分析與計算....................15
§4.2.2軸的強度計算..........................17
§4.2.3軸的剛度計算..........................19
§4.3軸承壽命計算..............................20
第五章 變速器操縱機構及結構元件.................22
§5.1變速器操縱機構............................22
§5.2變速器結構元件............................22
第六章 結論.....................................25
參考文獻.........................................26
致謝.............................................27
III