喜歡這個資料需要的話就充值下載吧。。。資源目錄里展示的全都有預覽可以查看的噢，，下載就有,,請放心下載，原稿可自行編輯修改=【QQ：11970985 可咨詢交流】====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=【QQ：197216396 可咨詢交流】====================
河 北 科 技 大 學
畢業設計說明書(論文)
學生姓名： 楊驍博 學 號： 020501231
學 院： 機械電子工程學院
專 業： 機械設計制造及其自動化
題 目： 鋼管管端成型機設計
指導教師： 張利平（副教授）
評閱教師： 尹成湖（教授）
2006年6月
畢業設計說明書（論文）中文摘要
摘 要
本課題研究設計了一種鋼管管端成型機，該機用于將無縫鋼管管端加工成杯狀、喇叭狀等異形，也可用于其它材料管件的脹形加工。
首先綜合比較了目前國內外四種不同原理的脹管方法，并根據具體的生產情況制定了本課題的解決方案，即采用機械脹管中的后退式脹管原理。該機的兩個液壓控制執行器用來實現對工件的夾緊和脹形。對本機的總體方案進行了論證與擬定，并進行了結構設計。然后對該機的液壓系統進行了設計。首先通過計算確定執行器所受外載，從而計算出執行器的相關參數并對其進行選型，繼而對驅動電機和泵進行選型，并選定了液壓系統中的控制閥和輔件。繪制出該機的液壓系統原理圖后，將其轉化為集成塊單元回路圖，并據此圖對集成塊組進行了設計。最后對液壓泵組和油箱進行了設計。合理布置管路后，將集成塊組、液壓泵組和油箱裝配在一起，即對液壓站進行了設計。
關鍵詞 管端成型 主機設計 集成塊組 油箱設計 管路布置
畢業設計說明書（論文）外文摘要
Title The Design of machine for the End of the Steel Tube
Molding
Abstract
The question for discussion designed a sort of machine for the end of the steel tube molding. The machine is used for processing the end of the sew (non-seam) steel tube into abnormity of cup form and trumpet etc. Also it can be used in different shape of other tube of different materials. First, I established the solution of the topic through the comparation of the four kind method of different principles of expanding the end of the steel tube, according to the frondose producing condition. The solution is that I chose the method of pulling the shaft out of the principles in machine. The machine contains two enforce implements, controlled by the Hydraulic system, achieving the effect of clamping and expanding. Then I carried through the argumentation and draw-up the collectivity project of the machine, and designed the structure of the machine. Second, I designed the Hydraulic system of the machine. At the beginning, I calculated the perform part’s load of the external, and calculated the related parameter of the perform part and chose the suited type, then I chose the type of electromotor and pump, and chose the control valve and assistant component in the Hydraulic system, After plotted the principle diagram of the Hydraulic system of the machine, I transformed the diagram into the picture of the loop of the integrating blocks. And designed the structure of the integrating blocks according to the picture. Finally I designed the combination of the hydraulic pump and oil box. After disposed the pipelines, I assembled the integrating blocks and the combination of the hydraulic pump, also and the oil box, that is I designed the combination of the hydraulic system.
Key Words The end of the steel tube molding The design of the machine
The integrating blocks The design of the oil box Dispose the pipelines