喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有,,請放心下載,,文件全都包含在內,,【有疑問咨詢QQ:1064457796 或 1304139763】
===========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有,,請放心下載,,文件全都包含在內,,【有疑問咨詢QQ:1064457796 或 1304139763】
===========================================
第 V 頁
直接加熱轉筒式干燥機
摘 要
時代在發展,人類在進步。環境保護已經越來越多的被人們所重視。解決煤燃燒產生的大氣污染問題是目前一個很重要也很緊迫的問題,隨著人類對煤的研究,發現原煤和生物量的混合物燃燒后幾乎不含有污染性氣體。本設計的目的是為無污染生物煤的生產提供低成本的原煤干燥設備,為生物煤的推廣打下堅實的基礎,同時也為環保事業做出貢獻。
本設計采用如下方案:采用轉筒式,直接傳熱方式,主要靠對流傳熱,采取并流操作,使用高溫?zé)煹罋庾鳛檩d體。由一般異步電動機,圓柱齒輪減速器和齒輪齒圈傳動組成動力傳動裝置。由重油燃燒產生煙道氣,石棉做保溫層,尾氣除塵設備選擇旋風分離器。物料進、出傳送均采用皮帶傳輸機。密封方式頸向迷宮式密封。
在設計任務給定后,確定了設計所需的基本參數。進行了物料衡算和熱量衡算,解決了需要消耗多少干燥介質和熱量的問題。依據物料衡算和熱量衡算的結果計算并確定了設備的規格參數。對干燥設備作了結構設計的詳細計算和必要的強度校核。并選擇配套的附屬裝置,如物料的傳輸方式選擇、熱風系統加熱方式選擇、引風機選型等,更加完善了設計的完整性。
關 鍵 詞:直接傳熱,轉筒式,干燥,原煤
Direct heating transfers the cylinder drying machine
Abstract
As the time going ,the environmental protection is getting more and more important in the new century. The output of coal burns is one kind of the things that course the environments pollution. However, scientists find that the output of the mixture burns ,which is the raw coal and creature s mixture, hardly doesnt contains pollutions. The purpose of this design is to study out one kind of dry equipments for raw coal, which makes the first step from the raw coal to creature coal.
This design adopted the tube type dehydrator ,and transmitting heat directly by the main way of convection .and in this design adopted the parallel flow operation ,used the heat flue gas to carry the heat .the general asynchronous motor, cylinder gear speed reducer and tooth ring transmission composite the power transmission apparatus .the bure of the heavy oil create the flue gas and the heat preservation lamella is made by asbestos .the same time tornado separator can remove the dust tail gases. The strap delivers, machine carries out the in and out transmissions of the material. The seal method is diameter faces the maze type seal.
After the design mission given ,I made out all the data that must be compute out. To resole the problem how much medium for dry and the calorific value would be consumed, I have done the material calculates and the sum calorific value calculates. And according them I work out the specification parameter of the equipment. And more I have made some additional deal design, such as hot blast system and the breeze machine etc ,which made the design more perfect the complete.
Key Words:Transmit heat directly , cylinder ,Dry , Raw coal
目 錄
1 緒論……………………………………………………………………………………1
1.1干燥技術的概況………………………………………………………………1
1.2干燥技術發展的總趨勢………………………………………………………2
1.3干燥器的分類和選型…………………………………………………………3
1.3.1干燥器的分類…………………………………………………………3
1.3.2干燥器的選型…………………………………………………………3
1.4回轉圓筒干燥器的特性………………………………………………………4
1.5回轉圓筒干燥器在工業上的應用……………………………………………5
1.6回轉圓筒干燥器的設計概論…………………………………………………5
2 設計初始參數的確定…………………………………………………………………7
2.1已知參數………………………………………………………………………7
2.2其他所需參數的確定…………………………………………………………7
2.2.1并流適用于下列物料的干燥…………………………………………7
2.2.2逆流方式適用于下列物料……………………………………………7
2.3混合氣的參數計算……………………………………………………………12
3 物料衡算和熱量衡算…………………………………………………………………14
3.1水分蒸發量……………………………………………………………………14
3.2空氣消耗量……………………………………………………………………14
4 設備規格參數的設計和確定…………………………………………………………16
4.1筒體直徑………………………………………………………………………16
4.2容積散熱系數…………………………………………………………………16
4.3筒體長度………………………………………………………………………16
4.3.1預熱段長度……………………………………………………………16
4.3.2蒸發段長度……………………………………………………………18
4.3.3加熱段長度……………………………………………………………18
4.4轉筒得轉速喝傾斜度得選擇…………………………………………………19
4.4.1轉速……………………………………………………………………19
4.4.2筒體地斜度……………………………………………………………19
4.5停留時間………………………………………………………………………19
4.6填充系數………………………………………………………………………20
4.7熱風系統加熱形式的選擇……………………………………………………21
4.8鼓風機或引風機的選型………………………………………………………21
4.9旋風分離器和進、出料裝置…………………………………………………22
5 回轉圓筒干燥器的結構設計與計算…………………………………………………24
5.1筒體設計………………………………………………………………………24
5.1.1筒體結構組成…………………………………………………………24
5.1.2筒體載荷計算…………………………………………………………29
5.1.3筒體彎矩與應力計算…………………………………………………32
5.1.4筒體變形計算…………………………………………………………35
5.2滾圈設計………………………………………………………………………38
5.2.1滾圈的結構型式………………………………………………………38
5.2.2滾圈的設計與計算……………………………………………………39
5.3托輪及軸承設計………………………………………………………………41
5.3.1結構設計………………………………………………………………41
5.3.2托輪及軸承的計算……………………………………………………42
5.4擋輪及軸的設計………………………………………………………………46
5.4.1擋輪……………………………………………………………………46
5.4.2擋輪受力………………………………………………………………46
5.4.3擋輪參數的確定………………………………………………………47
5.4.4擋輪軸及軸承的選擇…………………………………………………48
5.5傳動裝置的確定設計依據……………………………………………………49
5.5.1電動機選型……………………………………………………………49
5.5.2齒輪配置………………………………………………………………49
5.5.3傳動裝置計算…………………………………………………………50
5.6減速器的選型…………………………………………………………………53
5.6.1按強度選用減速器……………………………………………………53
5.6.2校核熱功率……………………………………………………………53
5.7聯軸器的選型…………………………………………………………………54
5.7.1聯軸器的計算轉矩……………………………………………………54
5.7.2聯軸器的工作轉速……………………………………………………54
5.7.3軸孔直徑………………………………………………………………54
5.8進、出料端設計………………………………………………………………54
6 回轉圓筒干燥器的密封………………………………………………………………56
7 回轉圓筒干燥器的安裝、調整和運轉………………………………………………57
8 經濟性分析……………………………………………………………………………58
結論與思考……………………………………………………………………………60
致謝……………………………………………………………………………………61
參考文獻………………………………………………………………………………62