肥皂盒下端蓋的塑料注塑模模具設計-注射模含6張CAD圖
肥皂盒下端蓋的塑料注塑模模具設計-注射模含6張CAD圖,肥皂盒,下端,塑料,注塑,模具設計,注射,cad
肥皂盒下端蓋塑料成型工藝及模具設計
摘 要
肥皂盒在我們的生活中非常的普遍,幾乎每家都要用到。市場上也有各種各樣的肥皂盒,形狀各異,有些是把肥皂盒做成水果造型,有些是動植物造型,來吸引顧客的目光,以引發人們的購買欲。此次設計的肥皂盒是在上蓋上打孔,肥皂放在上蓋上,這樣水會沿孔斜度往下蓋流,水積在下蓋里,上下蓋之間有一定的距離保證一定的時間里水不會滿到上蓋的肥皂上,積水手動倒掉即可,這樣即保證了肥皂的利用率,又保證了房間的清潔。優點是:結構簡單,提高肥皂的使用壽命;缺點是:積在下蓋的積水需人工手動倒出。此次設計是以上蓋為主,在上蓋的設計中主要要解決以下幾個問題:1、肥皂放在上蓋上時,以點接觸,設計六個橢圓突出,支撐肥皂,使肥皂和盒子之間以點接觸;2、上蓋上還要開一個槽,使水可以沿著曲面流人下蓋;3、設計澆口時要注意上蓋上表面的精度,不能在表面上留有印痕;4、在設計推出機構時要注意推桿放置的位置,放在下表面,不能影響上表面的表面精度;5、在開模時需保證塑件留在型腔上,用推桿頂出。
關鍵詞:復位機構,脫模機構,澆口。
SOAP dish plastic forming process and die design for end cover
Abstract
Playing in the water more soap soap soap box in our life is very common, almost every family to use. The market also has a variety of kinds of boxes, shapes, and some is the soap box made of fruit shape, The design of soap box is in Shang cover Shang playing hole, SOAP put in Shang cover Shang, such water will along hole slope down cover flow, water product in Xia cover in, upper and lower cover Zhijian has must of distance guarantee must of time in water not full to Shang cover of SOAP Shang, water manual pour off can, such that guarantee has SOAP of utilization, and guarantee has room of clean. Advantages: simple structure, increase the service life of SOAP; disadvantages are: product covered under the water need manual out. The design is above cover mainly, in Shang cover of design in the main to solution following several problem: 1, and SOAP put in Shang cover Shang Shi, to points contact, design six a oval highlight, support SOAP, makes SOAP and box Zhijian to points contact; 2, and Shang cover Shang also to open a slot, makes water can along surface flow people Xia cover; 3, and design poured mouth Shi to note Shang cover Shang surface of precision, cannot in surface Shang left has prints; 4, and in design launched institutions Shi to note putter placed of location, put in Xia surface, Cannot affect the surface surface; 5, in open mode, you need to ensure plastic parts on the cavity, putting out.
Key words: mechanism, demoulding mechanism of gate.
II
收藏