喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
支板的沖壓工藝與模具設計
摘 要
本設計題目為復合模具設計，采用典型倒裝復合模具設計。通過工藝分析，工藝方案的確定，確定了模具設計的方向；通過對支板零件尺寸的分析，確定了毛坯尺寸，計算沖裁力，來計算壓力中心，選擇壓力機和壓力機的噸位。
本設計運用了沖裁工藝及模具設計的專業知識。首先，通過分析制件的結構工藝，去選擇模具的類型；然后，分析了制造制件所用的材料進而確定凸凹模的尺寸，也為凸、凹模的材料及壓力機選擇提供有了依據。最后經過總體分析沖裁件的特征，確定了模具設計參數，選擇其他零件及卸料裝置。
關鍵詞: 凸凹模 凸模 凹模
Support plate stamping process and die desigen
ABSTRACT
The design for the complex subject of mold design, using a typical flip-complex mold design. Through process analysis, process identification program to determine the direction of the mold design; through parts of the support plate size analysis, to determine the rough size, calculating punching power, to calculate the pressure center, select the tonnage presses and presses.
The use of blanking process design and die design expertise. First, by analyzing the parts of the structure of technology, to choose the type of mold; then, analysis of manufacturing parts of the material used to determine the size of convex and concave mold, as well as convex, concave mold and the material selection has been based on press. After blanking the final pieces of the overall analysis of the characteristics of the mold to determine the design parameters, choose the other parts and discharge devices 。
Keywords: Bump Die Die Punch