塑料蓋注塑模具設計【端蓋】【一模一腔】【斜銷抽芯】【說明書+CAD】
塑料蓋注塑模具設計【端蓋】【一模一腔】【斜銷抽芯】【說明書+CAD】,端蓋,一模一腔,斜銷抽芯,說明書+CAD,塑料蓋注塑模具設計【端蓋】【一模一腔】【斜銷抽芯】【說明書+CAD】,塑料蓋,注塑,模具設計,說明書,仿單,cad
河南機電高等?？茖W(xué)校
學生畢業設計（論文）中期檢查表
學生姓名
學 號
指導教師
選題情況
課題名稱
塑料蓋零件注塑成型工藝及注塑模具設計
難易程度
偏難
適中
偏易
工作量
較大
合理
較小
符合規范化的要求
任務書
有
無
開題報告
有
無
外文翻譯質量
優
良
中
差
學習態度、出勤情況
好
一般
差
工作進度
快
按計劃進行
慢
中期工作匯報及解答問題情況
優
良
中
差
中期成績?cè)u(píng)定：
所在專業意見：
負責人：
年 月 日
塑料蓋模具的設計與制造
摘 要
本模具為連接套注射模具, 在設計時:1 、接受任務書。2 、調研消化原始資料。3 、選擇成型設備。4 、擬定模具結構方案。5 、方案的討論與論證。7 、繪制模具裝配圖。8 、繪制零件圖。9 、編寫設計說明書。10 、模具制造試模與圖紙修改。正確的確定模具成型零件的尺寸凸模、凹模等零件是確定制件形狀、尺寸和表面質量的直接因素關系甚大，要特別注意。模具的設計應制造方便, 盡量做道使設計的模具制造容易、造價便宜。特別是比較復雜的成型零件，必須考慮是采用一般的機械加工方法加工還是采用特殊的加工方法加工。模具的設計應當效率高、安全、可靠。模具零件應耐磨耐用。
關鍵詞：模具、成型、凸模、凹模。
Plastic Fasteners Die Design and Manufacture
Abstract
This molding tool is a cup that the cover injects the mold, while designing:1, accept the mission book.2 , the investigation digests the primitive data.3 , choose to model the equipments.4 , draft the molding tool construction project.5 , the discussion of the project and argument.7 , drawing the molding tool assembles the diagram.8 , draw the spare parts diagram.9 , weave to write to design the manual.10 , the molding tool manufacturing tries the mold and diagram paper modification.The exactitude really settles size punch , die,etc. spare parts that molding tool model spare parts is a direct factor that certain system a shape, size relate to with the surface quantity very big, want to be specially attention.The design of the molding tool should make the convenience, doing a molding tool manufacturing that make design easy and build the price cheapness to the best.Model the spare parts especially more complicatedly, must consider is to adopt the general machine process the method processes to adopt still to process specially the method processes.The design of the molding tool shoulds the efficiency high, safety, dependable.The molding tool spare parts should bear to whet enduring.
Key words:Molding tool, model, punch , die .
河南機電高等專科學校畢業設計說明書
河南機電高等?？茖W(xué)校
畢業設計（論文）任務書
系 部：
專 業：
學生姓名: 學 號:
設計(論文)題目： 塑料蓋注塑模具設計與制造
起 迄 日 期: 2007年 03月20日~ 05月 15日
指 導 教 師:
2007年03月15日
畢 業 設 計（論 文）任 務 書
1．本畢業設計（論文）課題來源及應達到的目的：
本設計是來源于實際生產，達到能夠獨立的完成一個塑料模具的過程，在設計期間，能夠獨立的查閱有關資料，并熟悉設計為以后設計跟復雜的模具積累一定的經驗。
2．本畢業設計（論文）課題任務的內容和要求（包括原始數據、技術要求、工作要求等）：
（1）了解目前國內外塑料模具的發展現狀；
（2）塑料件的結構工藝分析；
（3）塑料蓋模具設計，并編寫設計說明書一份；
（4）繪制模具總裝圖一張，并畫出非標準零件的所有零件圖；
原始資料：零件件圖及其尺寸見說明書，
材料：PA
生產批量：大批量
所在專業審查意見：
負責人：
年 月 日
系部意見：
系領導：
年 月 日
原始資料:
厚度：6mm
河南機電高等?？茖W(xué)校畢業設計說明書
緒 論
大學三年的學習即將結束，畢業設計是其中最后一個實踐環節，是對以前所學的知識及所掌握的技能的綜合運用和檢驗。隨著我國經濟的迅速發展，采用模具的生產技術得到愈來愈廣泛的應用。
隨著工業的發展，工業產品的品種和數量不斷增加。換型不斷加快。使模具的需要補斷增加。而對模具的質量要求越來越高。模具技術在國民經濟中的作用越來越顯得更為重要。
模具是制造業的重要工藝基礎，在我國，模具制造屬于專用設備制造業。中國雖然很早就開始制造模具和使用模具，但長期未形成產業。直到20世紀80年代后期，中國模具工業才駛?cè)氚l(fā)展的快車道。近年，不僅國有模具企業有了很大發展，三資企業、鄉鎮（個體）模具企業的發展也相當迅速。雖然中國模具工業發展迅速，但與需求相比，顯然供不應求，其主要缺口集中于精密、大型、復雜、長壽命模具領域。由于在模具精度、壽命、制造周期及生產能力等方面，中國與國際平均水平和發達國家仍有較大差距，因此，每年需要大量進口模具。中國模具產業除了要繼續提高生產能力，今后更要著重于行業內部結構的調整和技術發展水平的提高。結構調整方面，主要是企業結構向?qū)I(yè)化調整，產品結構向著中高檔模具發展，向進出口結構的改進，中高檔汽車覆蓋件模具成形分析及結構改進、多功能復合模具和復合加工及激光技術在模具設計制造上的應用、高速切削、超精加工及拋光技術、信息化方向發展。近年，模具行業結構調整和體制改革步伐加大，主要表現在，大型、精密、復雜、長壽命、中高檔模具及模具標準件發展速度高于一般模具產品；塑料模和壓鑄模比例增大；專業模具廠數量及其生產能力增加；“三資”及私營企業發展迅速；股份制改造步伐加快等。從地區分布來看，以珠江三角洲和長江三角洲為中心的東南沿海地區發展快于中西部地區，南方的發展快于北方。目前發展最快、模具生產最為集中的省份是廣東和浙江，江蘇、上海、安徽和山東等地近幾年也有較大發展。
在完成大學三年的課程學習和課程、生產實習，我熟練地掌握了機械制圖、機械設計、機械原理等專業基礎課和專業課方面的知識，對機械制造、加工的工藝有了一個系統、全面的理解，達到了學習的目的。對于模具設計這個實踐性非常強的設計課題，我們進行了大量的實習。經過在新飛電器有限公司、洛陽中國一拖的生產實習，我對于模具特別是塑料模具的設計步驟有了一個全新的認識，豐富了各種模具的結構和動作過程方面的知識，而對于模具的制造工藝更是實現了零的突破。在指導老師的協助下和在工廠師傅的講解下，同時在現場查閱了很多相關資料并親手拆裝了一些典型的模具實體，明確了模具的一般工作原理、制造、加工工藝。并在圖書館借閱了許多相關手冊和書籍，設計中，將充分利用和查閱各種資料，并與同學進行充分討論，盡最大努力搞好本次畢業設計。在設計的過程中，將有一定的困難，但有指導老師的悉心指導和自己的努力，相信會完滿的完成畢業設計任務。由于學生水平有限，而且缺乏經驗，設計中不妥之處在所難免，肯請各位老師指正.
第一章模塑工藝規程的編制
該塑件是端蓋產品，其零件圖如圖1-1所示。本塑件的材料采用尼龍1010，生產類型為大批量生產。
1-1塑料蓋
1.1塑件的工藝性分析
1.1.1塑件的原材料分析
塑件的材料采用尼龍1010，屬熱塑性塑料。從使用性能上看，尼龍1010是半透明，吸水小，耐寒性較好，堅韌﹑耐磨﹑耐油﹑耐水，抗霉菌，但吸水性大；從成型性能上看，塑件壁不宜取厚，并應均勻，脫模度不宜取小，尤其對厚壁及深高塑件更應取大。受熱時間不宜超過30min，料溫高則收縮大，易出飛邊，收縮小，取向性強，注射壓力低易發生凹痕，波紋。成型周期按塑件壁厚而定，厚則取長，薄則取短，為了減少收縮，凹痕﹑縮孔，一般宜取低模溫﹑高注射壓力的成形條件，以及采用白油作脫模劑;尼龍1010的主要技術指標：密度是1.04kg/dm﹑比體積是0.96dm/kg﹑吸水率是0.2～0.4﹑收縮率是1.3～2.3s﹑熔點是205t/c﹑熱變形溫度是55c﹑抗拉屈服強度是62Mpa﹑拉伸彈性模量1.8×10Mpa﹑抗彎強度88Mpa﹑硬度9.75HB﹑擊穿強度20KV/mm。
1.2.塑件的結構和尺寸精度及表面質量分析
1.2.1.1結構分析
從塑料蓋圖1-1上分析，從零件圖上分析，該零件總體形狀為空心圓筒形，在下部帶有一圈內凹，內凹為外半徑為55mm、內半徑53mm，高度為4mm的圓環，因此模具設計時必須設置側向分型抽芯機構，該零件屬于中等復雜程度.
1.2.1.2尺寸精度分析
該零件重要尺寸，如外徑Φ118mm,Φ106內部形狀等尺寸精度為MT3級（GB/T14486—1993），次要尺寸，如高度24mm的尺寸精度為MT5級（GB/T14486—1993）。由以上分析可見，該零件的尺寸精度中等偏上，對應的模具相關尺寸加工可以得到保證。
從塑件的壁厚上來看,壁厚最大處為6mm,壁厚均勻, 符合尼龍1010的最小壁厚原則，在制件的轉角處設計圓角，防止在此處出現缺陷，由于制件的尺寸較小，尼龍1010的強度較大不需增設加強
1.2.1表面質量分析
該零件的表面除要求沒有缺陷﹑毛刺，保持表面的平滑，內部不得有導電雜質外，沒有什么特別的表面質量要求，故比較容易實現。
綜上分析可以看出,注塑時在工藝控制得較好的情況下,零件的成型要求可以得到保證.
1.2.2計算塑件的體積和質量
計算塑件的質量是為了選用注塑機及確定模具型腔數。
計算塑件的體積：V=60.3cm
計算塑件的質量：根據設計手冊可查得尼龍1010的密度為ρ=1.04kg/dm
塑件質量：M=Vρ
=31.3×10×1.04×10
=60.01g
采用一模兩件的模具結構，考慮其外形尺寸，注塑時所需壓力和工廠現有設備等情況，初步選用注塑機SZY—125型。
1.2.3塑件注塑工藝參數的確定
查找有關文獻和參考工廠時間應用的情況，尼龍1010的成型工藝參數可作如下選擇：（試模時，可根據實際情況作適當調整）
注塑溫度： 括料筒溫度和噴嘴溫度。
料筒溫度： 后段溫度t選用190～210c；
中段溫度t: 選用200～220c；
前段溫度t: 選用210～230c；
噴嘴溫度： 200～210c；
注塑壓力一： 選用40～100Mpa；
注塑時間： 選用20～90s；
保壓壓力： 選用 65Mpa；
高壓時間： 選用0～5s；
冷卻時間： 選用20～120s；
總周期： 選用45～220s；
后處理方法： 采用油﹑水﹑鹽水；
后處理溫度： 90～100t/c;
后處理時間： 4h。
說明1：預熱和干燥均采用鼓風烘箱。
2：凡潮濕環境使用的塑料，應進行調濕處理，在100～120c水中加熱2～18h。
1.2.4.塑料成型設備的選取
根據計算及原材料的注射成型參數初選注塑機為SZY-300查材料知：
標稱注射量： 320cm
螺桿直徑/cm Ф60mm
注射容量/克： 125克
注射壓力/10Pa： 125Mpa
鎖模力10kN： 1400kN
最大注射面積/㎝: 645㎝
模具厚度/mm： 130～355mm
模板行程/mm: 340 mm
噴嘴 球半徑： 12mm
孔半徑： 4mm
定位孔直徑/㎜ 125
推出兩側孔徑/mm 50mm
孔距/mm 230mm
第2章 注塑模的結構設計
注塑模結構設計主要包括：分型面選擇﹑模具型腔數目的確定﹑型腔的排列方式﹑冷卻水道布局﹑澆口位置設置﹑模具工作零件的結構設計﹑側向分型與抽芯機構的設計﹑推出機構的設計等內容。
2.1分型面選擇
模具設計中，分型面的選擇很關鍵，它決定了模具的結構。應根據分型面選擇原則和塑件的成型要求來選擇分型面。
該塑件為端蓋，表面無特殊的要求，其分型面選擇如下圖所示：
2-1所示取A-A向?yàn)榉中兔妫绊懥慵庥^質量，抽芯在動模構簡單。
如圖2-1所示取B-B向?yàn)榉中兔?，抽芯?dòng)模，抽芯機構簡單，可以設計簡單的B--B抽芯機構進行側抽。從以上兩個分型如圖面的比較可以很容易的看出應該選擇第二個分型方法，有利于模具成型。
2-1分型面示意圖
2.2確定型腔的數目及排列方式
本塑件在注塑時采用一模一件，即模具只需一個型腔，故不需要設計分流道.
2.2.1模腔數量的確定
2.3澆注系統設計
2.3.1 主流道設計
根據XS-ZY-125型注塑機噴嘴的有關尺寸
噴嘴前端孔徑： d0=Ф6mm
噴嘴前端球面半徑： R0=8mm
根據模具主流道與噴嘴的關系：
R=R0+（1～2）mm
D=d0+(0.5～1)mm
取主流道的球面半徑： R=10mm
取主流道的小端直徑d=Ф3.5mm
為了方便將凝料從主流道中拔出，將主流道設計為圓錐形式其斜度取1～3度經換算得主流道大端直徑D=Ф8.5mm，為了使料能順利的進入分流道，可在主流道的出料端設計半徑r=5mm的圓弧過渡。
2.3.2澆口設計
根據塑件的成型要求及型腔的排列方式，選用側澆口較為理想。設計時考慮選擇從塑件的表面進料，而且在模具結構上采取鑲拼型腔﹑型心，有利于填充﹑排氣。故采用截面為矩形的側澆口，查表初選尺寸為（b×l×h）1mm
×0.8mm×0.6mm,試模時修正.
2.3.3排氣結構的設計
在注塑模具的設計過程中，必須考慮排氣結構的設計，否則，熔融的塑料流體進入模具型腔內，氣體如不能及時排出會使制件的內部有氣泡，甚至?xí)a(chǎn)生很高的溫度使塑料燒焦，從而出現廢品。
排氣方式有兩種：開排氣槽排氣和利用合模間隙排氣。
由于端蓋注塑模是小型鑲拼式模具，可直接利用分型面和鑲拼間隙進行排氣，而不需在模具上開設排氣槽。（尼龍1010塑料的最小不溢料間隙為0.03mm，間隙較小，再加上尼龍1010的流動性較好，也不宜開排氣槽.
2.3.4主流道襯套的選取
為了提高模具的壽命在模具與注塑機頻繁接觸的地方設計為可更換的主流道襯套形式，選取材料為T8A，熱處理以后的硬度為53～57HRC，主流道襯套和定模的配合形式為H7/m6的過渡配合。
2.4抽芯機構設計
此設計的塑件側壁有兩個側凹,它們均垂直于脫模方向,阻礙成型后塑件從模具脫出.因此成型小側凹的零件必須做成活動的型心,即必須設置抽芯機構.本模具采用斜銷抽芯機構.
2.4.1確定抽芯距
抽芯距一般大于側凹的深度本副模具設計中必須高于制件最小高度的一半
H1=B2/2=22.5/2=11.25mm
另加3～5mm的抽芯安全系數，可取抽芯距為15mm
2.4.2確定斜銷的傾角
斜導柱的傾角a是斜銷機構的主要技術參數，它與抽拔距和抽芯距有直接關系，一般取15°～25°本副模具取a=20°
2.4.3確定斜銷的尺寸
斜導柱的直徑取決于抽拔力及傾角可按設計資料有關公式進行計算，本例可采用經驗估值，取斜導柱的直徑d=Ф12mm
2.4.4斜導柱的長度
可根據抽拔距，固定端模板的厚度，斜銷直徑及斜角大小確定：
L=L1+L2+L3+L4+L5
=D/2×tana+h/cosa+d/2tana+H/sina+（10～15）
=69.6mm
?。? L=70mm
2.4.5 滑塊和導滑槽設計
由于側凹的尺寸較小型芯滑塊可采用整體式加工增加強度，導滑槽的導滑長度和定位裝置的設計可采用經驗法，側向抽芯的抽拔距較小，也無須滑塊的定位裝置。
2-2 抽芯機構示意圖
2.5 凹模的設計
本副模具采用整體式凹模結構，由于制件結構簡單，模具牢固，不易變形，制件沒拼界逢，適用用于本制件的模具。如圖所示：
2-2凹模的結構圖
材料選用T8A, 硬度在50HRC以上.
根據分流道與澆口的設計要求，分流道與澆口設在凹模型腔上其結構見上2-2圖所示。
凹模板尺寸：根據矩形凹模最小壁厚經驗曲線知，此塑件的成型
壓力小于30MPA。
由經驗可知【3】：
長為:300 mm. 寬為:230 mm.
凹模高為: h=25mm
件高為: 6mm
加工可以直接用銑刀銑出，也可以用成型電極。為了節約成本。在這里我選用銑刀銑。
第3章 端蓋注塑模具的有關計算
本例中成型零件工作尺寸計算時均采用平均尺寸，平均收縮率平均制造公差和平均磨損率來計算。
查常用塑料的收縮率塑料尼龍1010的成型收縮率為S=0.5～4.0％，故平均我們?nèi)镾cp=0.5％?？紤]到工廠模具制造的現有條件，模具制造公差取Б=Δ/3。
表一：凹模工作尺寸的計算：
塑件尺寸
計算公式
型腔工作尺寸
Φ118
Lm=(Ls+LsScp％－3/4Δ)+Б
Φ118.40+0.050
24
24.48+0.020
80
79.96+0.08
表一
成型零部件的制造誤差：
成型零部件的制造誤差包括成型零部件的加工誤差和安裝誤差，配合誤差等幾個方面。設計時一般應將成型零部件的制造公差控制在塑件的1/3左右，通常取IT6—IT9級，綜合考慮取IT8級。
第4章 模具加熱和冷卻系統的設計
塑料在生產過程中由于需要對熔融的塑料流體進行冷卻，塑料制件不能有太高的溫度（防止出模后制件發生翹曲，變形）冷卻系統設計可按下式進行計算：
設該模具平均工作溫度為60°，用20°的常溫水作為模具的冷卻介質，其出口溫度為30°，產量為（1分鐘2模）1000g/h。
① 求塑件在硬化時每小時釋放的熱量為Q3，查有關文獻得尼龍1010的單位熱流量為Q2=314.3～398.1J/g ,取Q2=350J/g：
Q3=WQ2=1008g/h×350J/h=352800J
② 求冷卻水的體積流量V
V=WQ1/Pc1(T1－T2)
=140cm3
溫度調節對塑件的質量影響主要表現在以下幾個方面：
變形 尺寸精度 力學性能 表面質量
在選擇模具溫度時，應根據使用情況著重滿足制件的質量要求。
在注射模具中溶體從200 C,左右降低到60C左右，所釋放的能量5％以輻射，對流的方式散發到大氣中，其余95％由冷卻介質帶走，因此注射模的冷卻時間只要取決與冷卻系統的冷卻效果。模具的冷卻時間約占整個循環周期的2/3?？s短循環周期的冷卻時間是提高是提高生產效率的關鍵。在冷卻水冷卻過程中，在湍流下的熱傳遞是層流的10—20倍。在次我選擇湍流。 如圖表二：
冷卻水直徑d/（mm）
最低流量v（m/s）
流量qv/（m/min）
12
1.10
7.4×10
表二
第5章 模具閉合高度確定
在支撐板與固定零件的設計中根據經驗確定：定模板厚度H1=42mm，斜楔塊厚度為H2=34mm，腔板型芯固定板厚度為H3=28mm，推件板厚度為H4=16mm，墊塊厚度H5=73mm動模板厚度H6=27mm(考慮模具的抽芯距)如下圖所示：
1計算模具的閉合高度：
H=H1＋H2＋H3＋H4＋H5
=25＋46＋23＋70＋25＋31
=220mm
2．校核注塑機的開，合?？臻g
(1)：模具合模時校核：
110mm<220mm<277mm （模具符合注塑機的要求）
(2)：模具開模時校核：
110mm<220mm＋15mm<200mm （模具符合注塑機的要求）
第6章 注塑機有關參數的校核
本模具的外形尺寸為300mm×300mm×220mm, XS-ZY-125型注塑機模板最大安裝尺寸是370mm×350mm。
由于上述計算的模具閉合高度為220mm，XS-ZY-125型注塑機的最小模具厚度為200mm，最大模具厚度為300mm
1：模具合模時校核：
200mm<220mm<300mm
2：模具開模時校核：
200mm<220mm＋15mm<300mm
其中：15mm為模具的抽拔距
經校核SZY-125型注塑機能滿足使用要求故可以采用。
第7章 繪制模具總裝圖和非標零件工作圖
7.1本模具總裝圖如下圖所示：
7-1模具裝配圖
7.2本模具的工作原理：
模具安裝在注塑機上，定模部分固定在注塑機的定模板上，動模固定在注塑機的動模板上。合模后，注塑機通過噴嘴將熔料經流道注入型腔，經保壓，冷卻后塑件成型，注塑完成。開模時動模部分隨動模板一起漸漸將分型面打開，與此同時在斜導柱的作用下側抽芯滑塊從型腔中退出，完成側抽芯動作
當分型面打開到23mm時動模運動停止，在注塑機頂出作用下，推動頂桿運動將塑件頂出。合模時，隨著分型面的閉合側型心滑塊，同時復位桿也對頂桿進行復位。
結論
大學三年的學習即將結束，畢業設計是其中最后一個實踐環節，是對以前所學的知識及所掌握的技能的綜合運用和檢驗。隨著我國經濟的迅速發展，采用模具的生產技術得到愈來愈廣泛的應用。在完成大學三年的課程學習和課程、生產實習，我熟練地掌握了機械制圖、機械設計、機械原理等專業基礎課和專業課方面的知識，對機械制造、加工的工藝有了一個系統、全面的理解，達到了學習的目的。對于模具設計這個實踐性非常強的設計課題，我們進行了大量的實習。經過在新飛電器有限公司、洛陽中國一拖的生產實習，我對于模具特別是塑料模具的設計步驟有了一個全新的認識，豐富了各種模具的結構和動作過程方面的知識，而對于模具的制造工藝更是實現了零的突破。在指導老師的協助下和在工廠師傅的講解下，同時在現場查閱了很多相關資料并親手拆裝了一些典型的模具實體，明確了模具的一般工作原理、制造、加工工藝。并在圖書館借閱了許多相關手冊和書籍，設計中，將充分利用和查閱各種資料，并與同學進行充分討論，盡最大努力搞好本次畢業設計。
致謝
首先感謝本人的導師于智宏老師，他對我的仔細審閱了本文的全部?jī)?nèi)容并對我的畢業設計內容提出了許多建設性建議。于智宏老師淵博的知識，誠懇的為人，使我受益匪淺，在畢業設計的過程中，特別是遇到困難時，他給了我鼓勵和幫助，在這里我向他表示真誠的感謝！
感謝母?！幽蠙C(jī)電高等專科學校的辛勤培育之恩！感謝材料工程系給我提供的良好學習及實踐環境，使我學到了許多新的知識，掌握了一定的操作技能。
感謝和我在一起進行課題研究的同窗司永富同學，和他在一起討論、研究使我受益非淺。
最后，我非常慶幸在三年的的學習、生活中認識了很多可敬的老師和可親的同學，并感激師友的教誨和幫助！
參考文獻
［1］ 楊占堯主編. 塑料注塑模結構與設計. 清華大學出版社.
［2］ 中國模具設計大典.
［3］ 王孝陪主編. 塑料成型工藝及模具簡明手冊. 機械工業出版社. 2000
［4］ 模具制造手冊編寫組. 模具制造手冊. 機械工業出版社. 1996
［5］ 馮炳堯，韓泰榮，蔣文生主編. 模具設計與制造簡明手冊. 上海科學技術出版社，1998
［6］ 賈潤禮，程志遠主編. 實用注塑模設計手冊. 中國輕工業出版社. 2000
［7］ 唐志玉主編. 模具設計師指南. 國防工業出版社. 1999
［8］ 屈華昌主編. 塑料成型工藝與模具設計. 機械工業出版社. 1995
［9］ 黃毅宏主編. 模具制造工藝. 機械工業出版社. 1999
［10］彭建聲主編. 簡明模具工實用技術手冊. 機械工業出版社. 1993
目 錄
緒 論 1
第一章模塑工藝規程的編制 3
1.1塑件的工藝性分析 3
1.2.塑件的結構和尺寸精度及表面質量分析 4
第2章 注塑模的結構設計 8
2.1分型面選擇 8
2.2確定型腔的數目及排列方式 9
2.3澆注系統設計 11
2.4抽芯機構設計 13
2.5 凹模的設計 14
第3章 端蓋注塑模具的有關計算 16
第4章 模具加熱和冷卻系統的設計 18
第5章 模具閉合高度確定 20
第6章 注塑機有關參數的校核 21
第7章 繪制模具總裝圖和非標零件工作圖 22
7.1本模具總裝圖如下圖所示： 22
7.2本模具的工作原理： 22
結論 23
致謝 24
參考文獻 25
塑料概模具的設計與制造
摘 要
本模具為連接套注射模具, 在設計時:1 、接受任務書。2 、調研消化原始資料。3 、選擇成型設備。4 、擬定模具結構方案。5 、方案的討論與論證。7 、繪制模具裝配圖。8 、繪制零件圖。9 、編寫設計說明書。10 、模具制造試模與圖紙修改。正確的確定模具成型零件的尺寸凸模、凹模等零件是確定制件形狀、尺寸和表面質量的直接因素關系甚大，要特別注意。模具的設計應制造方便, 盡量做道使設計的模具制造容易、造價便宜。特別是比較復雜的成型零件，必須考慮是采用一般的機械加工方法加工還是采用特殊的加工方法加工。模具的設計應當效率高、安全、可靠。模具零件應耐磨耐用。
關鍵詞：模具、成型、凸模、凹模。
Plastic Fasteners Die Design and Manufacture
Abstract
This molding tool is a cup that the cover injects the mold, while designing:1, accept the mission book.2 , the investigation digests the primitive data.3 , choose to model the equipments.4 , draft the molding tool construction project.5 , the discussion of the project and argument.7 , drawing the molding tool assembles the diagram.8 , draw the spare parts diagram.9 , weave to write to design the manual.10 , the molding tool manufacturing tries the mold and diagram paper modification.The exactitude really settles size punch , die,etc. spare parts that molding tool model spare parts is a direct factor that certain system a shape, size relate to with the surface quantity very big, want to be specially attention.The design of the molding tool should make the convenience, doing a molding tool manufacturing that make design easy and build the price cheapness to the best.Model the spare parts especially more complicatedly, must consider is to adopt the general machine process the method processes to adopt still to process specially the method processes.The design of the molding tool shoulds the efficiency high, safety, dependable.The molding tool spare parts should bear to whet enduring.
Key words:Molding tool, model, punch , die .
26
河南機電高等?？茖W(xué)校
畢業設計說明書
畢業設計題目：塑料蓋零件塑料成型工藝及注塑模具設計
系 部
專 業
班 級
學生姓名
學 號
指導教師
2007年 6月 05 日
河南機電高等?？茖W(xué)校
畢業設計評語
學生姓名： 班級: 學號：
題 目： 塑料蓋產品注塑模設計
綜合成績：
指導者評語：
1）該同學工作態度較認真，能較好的完成畢業設計任務；
2）該同學查閱了國內有關沖壓模具設計與制造方面的大量資料，制訂出了較合理的沖壓成形工藝及模具結構，設計中不存在創新；
3）該同學設計說明書內容較完整，計算基本正確，書寫較規范，圖紙符合要求且質量較高；
4）該同學裝配圖、零件圖上有少許不合理之處；
5）建議該同學成績?cè)u(píng)定：良好；
6）可以提交答辯。
指導者(簽字)：
年 月 日
畢業設計評語
評閱者評語：
評閱者(簽字)：
年 月 日
答辯委員會（小組）評語：
答辯委員會（小組）負責人(簽字)：
年 月 日
第 22 頁 共 23 頁
桂林電子科技大學畢業設計用紙
Automated Assembly Modelling for Plastic Injection Moulds
An injection mould is a mechanical assembly that consists of product-dependent parts and product-independent parts. This paper addresses the two key issues of assembly modelling for injection moulds, namely, representing an injection mould assembly in a computer and determining the position and orientation of a product-independent part in an assembly. A feature-based and object-oriented representation is proposed to represent the hierarchical assembly of injection moulds. This representation requires and permits a designer to think beyond the mere shape of a part and state explicitly what portions of a part are important and why. Thus, it provides an opportunity for designers to design for assembly (DFA). A simplified symbolic geometric approach is also presented to infer the configurations of assembly objects in an assembly according to the mating conditions. Based on the proposed representation and the simplified symbolic geometric approach, automatic assembly modelling is further discussed.
Keywords: Assembly modelling; Feature-based; Injection moulds; Object-oriented
1. Introduction
Injection moulding is the most important process for manufacturing plastic moulded products. The necessary equipment consists of two main elements, the injection moulding machine and the injection mould. The injection moulding machines used today are so-called universal machines, onto which various moulds for plastic parts with different geometries can be mounted, within certain dimension limits, but the injection mould design has to change with plastic products. For different moulding geometries, different mould configurations are usually necessary. The primary task of an injection mould is to shape the molten material into the final shape of the plastic product. This task is fulfilled by the cavity system that consists of core, cavity, inserts, and slider/lifter heads. The geometrical shapes and sizes of a cavity system are determined directly by the plastic moulded product, so all components of a cavity system are called product-dependent parts. (Hereinafter, product refers to a plastic moulded product, part refers to the component of an injection mould.) Besides the primary task of shaping the product, an injection mould has also to fulfil a number oftasks such as the distribution of melt, cooling the molten material, ejection of the moulded product, transmitting motion, guiding, and aligning the mould halves. The functional parts to fulfil these tasks are usually similar in structure and geometrical shape for different injection moulds. Their structures and geometrical shapes are independent of the plastic moulded products, but their sizes can be changed according to the plastic products. Therefore, it can be concluded that an injection mould is actually a mechanical assembly that consists of product-dependent parts and product-independent parts. Figure 1 shows the assembly structure of an injection mould. The design of a product-dependent part is based on extracting the geometry from the plastic product. In recent years, CAD/CAM technology has been successfully used to help mould designers to design the product-dependent parts. The
Fig. 1. Assembly structure of an injection mould
automatic generation of the geometrical shape for a product-dependent part from the plastic product has also attracted a lot of research interest [1,2]. However, little work has been carried out on the assembly modelling of injection moulds, although it is as important as the design of product-dependent parts. The mould industry is facing the following two difficulties when use a CAD system to design product-independent parts and the whole assembly of an injection mould. First, there are usually around one hundred product-independent parts in a mould set, and these parts are associated with each other with different kinds of constraints. It is time-consuming for the designer to orient and position the components in an assembly. Secondly, while mould designers, most of the time, think on the level of real-world objects, such as screws, plates, and pins, the CAD system uses a totally different level of geometrical objects. As a result, high-level object-oriented ideas have to be translated to low-level CAD entities such as lines, surfaces, or solids. Therefore, it is necessary to develop an automatic assembly modelling system for injection moulds to solve these two problems. In this paper, we address the following two key issues for automatic assembly modelling: representing a product-independent part and a mould assembly in a computer; and determining the position and orientation of a component part in an assembly.
This paper gives a brief review of related research in assembly modelling, and presents an integrated representation for the injection mould assembly. A simplified geometric symbolic method is proposed to determine the position and orientation of a part in the mould assembly. An example of automatic assembly modelling of an injection mould is illustrated.
2. Related Research
Assembly modelling has been the subject of research in diverse fields, such as, kinematics, AI, and geometric modelling. Lib-ardi et al. [3] compiled a research review of assembly modelling. They reported that many researchers had used graph structures to model assembly topology. In this graph scheme, the components are represented by nodes, and transformation matrices are attached to arcs. However, the transformation matrices are not coupled together, which seriously affects the transformation procedure, i.e. if a subassembly is moved, all its constituent parts do not move correspondingly. Lee and Gossard [4] developed a system that supported a hierarchical assembly data structure containing more basic information about assemblies such as “mating feature” between the components. The transformation matrices are derived automatically from the associations of virtual links, but this hierarchical topology model represents only “part-of” relations effectively.
Automatically inferring the configuration of components in an assembly means that designers can avoid specifying the transformation matrices directly. Moreover, the position of a component will change whenever the size and position of its reference component are modified. There exist three techniques to infer the position and orientation of a component in the assembly: iterative numerical technique, symbolic algebraic technique, and symbolic geometric technique. Lee and Gossard [5] proposed an iterative numerical technique to compute the location and orientation of each component from the spatial relationships. Their method consists of three steps: generation of the constraint equations, reducing the number of equations, and solving the equations. There are 16 equations for “against” condition, 18 equations for “fit” condition, 6 property equations for each matrix, and 2 additional equations for a rotational part. Usually the number of equations exceeds the number of variables, so a method must be devised to remove the redundant equations. The Newton–Raphson iteration algorithm is used to solve the equations. This technique has two disadvantages: first, the solution is heavily dependent on the initial solution; secondly, the iterative numerical technique cannot distinguish between different roots in the solution space. Therefore, it is possible, in a purely spatial relationship problem, that a
mathematically valid, but physically unfeasible, solution can be obtained.
Ambler and Popplestone [6] suggested a method of computing the required rotation and translation for each component to satisfy the spatial relationships between the components in an assembly. Six variables (three translations and three rotations) for each component are solved to be consistent with the spatial relationships. This method requires a vast amount of programming and computation to rewrite related equations in a solvable format. Also, it does not guarantee a solution every time, especially when the equation cannot be rewritten in solvable forms.
Kramer [7] developed a symbolic geometric approach for determining the positions and orientations of rigid bodies that satisfy a set of geometric constraints. Reasoning about the geometric bodies is performed symbolically by generating a sequence of actions to satisfy each constraint incrementally, which results in the reduction of the object’s available degrees of freedom (DOF). The fundamental reference entity used by Kramer is called a “marker”, that is a point and two orthogonal axes. Seven constraints (coincident, in-line, in-plane, parallelFz, offsetFz, offsetFx and helical) between markers are defined. For a problem involving a single object and constraints between markers on that body, and markers which have invariant attributes, action analysis [7] is used to obtain a solution. Actionanalysis decides the final configuration of a geometric object, step by step. At each step in solving the object configuration, degrees of freedom analysis decides what action will satisfy one of the body’s as yet unsatisfied constraints, given the available degrees of freedom. It then calculates how that action further reduces the body’s degrees of freedom. At the end of each step, one appropriate action is added to the metaphorical assembly plan. According to Shah and Rogers [8], Kramer’s work represents the most significant development for assembly modelling. This symbolic geometric approach can locate all solutions to constraint conditions, and is computationally attractive compared to an iterative technique, but to implement this method, a large amount of programming is required.
Although many researchers have been actively involved in assembly modelling, little literature has been reported on feature based assembly modelling for injection mould design.Kruth et al. [9] developed a design support system for an injection mould. Their system supported the assembly design for injection moulds through high-level functional mould objects (components and features). Because their system was based on AutoCAD, it could only accommodate wire-frame and simple solid models.
3. Representation of Injection Mould
Assemblies The two key issues of automated assembly modelling for injection moulds are, representing a mould assembly in com- puters, and determining the position and orientation of a product-independent part in the assembly. In this section, we present an object-oriented and feature-based representation for assemblies of injection moulds.
The representation of assemblies in a computer involves structural and spatial relationships between individual parts. Such a representation must support the construction of an assembly from all the given parts, changes in the relative positioning of parts, and manipulation of the assembly as a whole. Moreover, the representations of assemblies must meet the following requirements from designers:
1. It should be possible to have high-level objects ready to use while mould designers think on the level of real-world objects.
2. The representation of assemblies should encapsulate operational functions to automate routine processes such as pocketing and interference checks.
To meet these requirements, a feature-based and object-oriented hierarchical model is proposed to represent injection moulds. An assembly may be divided into subassemblies, which in turn consists of subassemblies and/or individual components. Thus, a hierarchical model is most appropriate for representing the structural relations between components. A hierarchy implies a definite assembly sequence. In addition, a hierarchical model can provide an explicit representation of the dependency of the position of one part on another.
Feature-based design [10] allows designers to work at a somewhat higher level of abstraction than that possible with the direct use of solid modellers. Geometric features are instanced, sized, and located quickly by the user by specifying a minimum set of parameters, while the feature modeller works out the details. Also, it is easy to make design changes because of the associativities between geometric entities maintained in the data structure of feature modellers. Without features, designers have to be concerned with all the details of geometric construction procedures required by solid modellers, and design changes have to be strictly specified for every entity affected by the change. Moreover, the feature-based representation will provide high-level assembly objects for designers to use. For example, while mould designers think on the level of a real- world object, e.g. a counterbore hole, a feature object of a counterbore hole will be ready in the computer for use.
Object-oriented modelling [11,12] is a new way of thinking about problems using models organised around real-world concepts. The fundamental entity is the object, which combines both data structures and behaviour in a single entity. Object-
oriented models are useful for understanding problems and designing programs and databases. In addition, the object- oriented representation of assemblies makes it easy for a“child” object to inherit information from its “parent”.
Figure 2 shows the feature-based and object-oriented hier- archical representation of an injection mould. The representation is a hierarchical structure at multiple levels of abstraction, from low-level geometric entities (form feature) to high-level subassemblies. The items enclosed in the boxes represent “assembly objects” (SUBFAs, PARTs and FFs); the solid lines represent “part-of” relation; and the dashed lines represent other relationships. Subassembly (SUBFA) consists of parts (PARTs). A part can be thought of as an “assembly” of form features (FFs). The representation combines the strengths of a feature-based geometric model with those of object-oriented models. It not only contains the “part-of” relations between the parent object and the child object, but also includes a richer set of structural relations and a group of operational functions for assembly objects. In Section 3.1, there is further discussion on the definition of an assembly object, and detailed relations between assembly objects are presented in Section 3.2
Fig. 2. Feature-based, object-oriented hierarchical representation
3.1 Definition of Assembly Objects
In our work, an assembly object, O, is defined as a unique, identifiable entity in the following form:
O = (Oid, A, M, R) (1)
Where:
Oid is a unique identifier of an assembly object (O). A is a set of three-tuples, (t, a, v). Each a is called an attribute of O, associated with each attribute is a type,
t, and a value, v. M is a set of tuples, (m, tc1, tc2, %, tcn, tc). Each element of M is a function that uniquely identifies a method. The symbol m represents a method name; and methods define operations on objects. The symbol tci(i= 1, 2, %, n) specifies the argument type and tc specifies the returned value type.
R is a set of relationships among O and other assembly objects. There are six types of basic relationships between assembly objects, i.e. Part-of, SR, SC, DOF, Lts, and Fit.
Table 1 shows an assembly object of injection moulds, e.g. ejector. The ejector in Table 1 is formally specified as:
(ejector-pinF1, {(string, purpose, ‘ejecting moulding’), (string, material, ‘nitride steel’), (string, catalogFno, ‘THX’)},
{(checkFinterference(), boolean), (pocketFplate(), boolean)}, {(part-of ejectionFsys), (SR Align EBFplate), (DOF Tx, Ty)}).
In this example, purpose, material and catalogFno are attributes with a data type of string; checkFinterference and pocketFplate are member functions; and Part-of, SR and DOF are relationships.
3.2 Assembly Relationships
There are six types of basic relationships between assembly objects, Part-of, SR, SC, DOF, Lts, and Fit.
Part-of An assembly object belongs to its ancestor object.
SR Spatial relations: explicitly specify the positions and orientations of assembly objects in an assembly. For a component part, its spatial relationship is derived from spatial constraints (SC).
SC Spatial constraints: implicitly locate a component part with respect to the other parts.
DOF Degrees of freedom: are allowable translational/ rotational directions of motion after assembly, with or without limits.
Lts Motion limits: because of obstructions/interferences, the DOF may have unilateral or bilateral limits.
Fit Size constraint: is applied to dimensions, in order to maintain a given class of fit.
Among all the elements of an assembly object, the relation-ships are most important for assembly design. The relationships between assembly objects will not only determine the position of objects in an assembly, but also maintain the associativities between assembly objects. In the following sub-sections, we will illustrate the relationships at the same assembly level with the help of examples.
3.2.1 Relationships Between Form Features
Mould design, in essence, is a mental process; mould designers most of the time think on the level of real-world objects such as plates, screws, grooves, chamfers, and counter-bore holes. Therefore, it is necessary to build the geometric models of all product-independent parts from form features. The mould designer can easily change the size and shape of a part, because of the relations between form features maintained in the part representation. Figure 3(a) shows a plate with a counter-bore hole. This part is defined by two form features, i.e. a block and a counter-bore hole. The counter-bore hole (FF2) is placed with reference to the block feature FF1, using their local coordinates F2and F1, respectively. Equations (2)–(5) show the spatial relationships between the counter-bore hole (FF2) and the block feature (FF1). For form features, there is no spatial constraint between them, so the spatial relationships are specified directly by the designer. The detailed assembly relationships between two form features are defined as follows:
Fig. 3. Assembly relationships.
F2k= F1k (4)
r2F= r1F+ b22*F1j+ AF1*F1i (5)
DOF:
ObjFhasF1FRDOF(FF2, F2j)
The counter-bore feature can rotate about axis F2j.
LTs(FF2, FF1):
AF1, b11? 0.5*b21 (6)
Fit (FF2, FF1):
b22= b12 (7)
Where
F and r are the orientation and position vectors of features.
F1= (F1i, F1j, F1k), F2= (F2i, F2j, F2k).
bij is the dimension of form features, Subscript i ifeature number, j is dimension number.
AF1is the dimension between form features.
Equations (2)–(7) present the relationships between the form feature FF1 and FF2. These relationships thus determine the position and orientation of a form feature in the part. Taking the part as an assembly, the form feature can be considered as “components” of the assembly.
The choice of form features is based on the shape characteristics of product-independent parts. Because the form features provided by the Unigraphics CAD/CAM system [13] can meet the shape requirements of parts for injection moulds and the spatial relationships between form features are also maintained, we choose them to build the required part models. In addition to the spatial relationships, we must record LTs, Fits relationships for form features, which are essential to c
收藏