搖臂鉆床液壓控制系統的設計

搖臂鉆床液壓控制系統的設計,搖臂鉆床液壓控制系統的設計,搖臂,鉆床,液壓,控制系統,設計 作 者: 學 號： 系： 專 業: 題 目: 搖臂鉆床液壓控制系統的設計 講師 指導者： (姓 名) (專業技術職務) 評閱者： (姓 名) (專業技術職務) 2010年5月 中文摘要 本文首先介紹了液壓控制系統的國內外發展現狀，然后對液壓控制系統在搖臂鉆床中的應用進行了研究分析，得出其基本工作原理都是通過液壓系統回路來實現控制卡盤的卡緊、松開及對不同的零件類型來實現正鉆、反鉆的控制，根據其工作原理畫出液壓回路圖。接著對液壓控制系統的主要參數和液壓執行元件等進行了選取并且列成表格以便查閱。液壓系統的主要參數就是壓力和流量，根據這些主要參數進行了一系列的計算、驗算。最后對本液壓系統的安裝調試等工作提出一些建議。 關鍵詞 液壓控制系統 系統回路 壓力 流量 外文摘要 Title the design of hydraulic control system of drilling machine Abstract This paper reports the current development status of hydraulic control system, and then analyzed the application of hydraulic control system in the radial drilling machine.I got that the basic principle of them are hydraulic system circuit to achieve control of the clamping chuck , release and the different types of components to achieve positive drill, anti-drilling control, according to their works draw hydraulic circuit diagram. The next step was selected the main parameters and hydraulic actuators of hydraulic control system to tabulated in order to checketc. The main parameter of the hydraulic system are pressure and flow rate, according to the main parameters i did a series of calculations.The last thing was made some suggestions for the setting of the hydraulic system and so on. Keywords hydraulic control system system circuit pressure flow rate