喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，圖紙為CAD格式可編輯，【有疑問咨詢QQ:414951605 或 1304139763】
III
遼寧工程技術大學課程設計
摘 要
工藝規程是工裝設計、制造和確定零件加工方法與加工路線的主要依據，它對組織生產、保證產品質量、提高勞動生產率、降低成本、縮短生產周期及改善勞動條件等都有著直接的影響，因此是生產中的關鍵工作。夾具在機械加工中起著重要的作用，它直接影響著機械加工的質量，生產效率和成本，因此，夾具設計是機械工藝準備和施工中的一項重要工作。本文對轉速器盤的結構和工藝進行了分析，確定了機械加工工藝路線，制訂出了零件的鑄造工藝方案和機械加工工藝規程，并為加工零件上直徑Φ9H8mm的孔設計了一套專用鉆床夾具。
關鍵詞：加工工藝；工藝規程；夾具設計
Abstract
The process is the base of frock design、manufacturing、the method of machining and machining route. Its function is flowing: organizing produce, controlling quality, enhancing productivity, reducing cost, reducing produce periods, improving work conditions, etc. So, the process planning is the core part of produce. Fixture is very important equipment in process of machine manufacturing because it can directly affect the quality of products and productivity and cost. So fixture designing is also a basilica portion in machine process preparative and manufacture. This thesis is about the analysis with the craftwork and the structure of the speed governor tray which is used for the diesel engine, make sure the process route, establish the foundry process project and the process planning of the parts, and design a set of appropriative fixture for the bore with diameter 9mm.
Key Words：Group technology; Process planning; Fixture design
目 錄
1 零件的工藝分析及生產類型的確定 1
1.1 零件的作用 1
1.2 零件的工藝分析 2
1.3 零件的生產類型 2
2 選擇毛坯、確定毛坯尺寸、繪制毛坯簡圖 2
2.1 毛坯的選擇 2
2.2 確定機械加工余量和公差 2
2.3 設計及繪制毛坯圖 3
3 選擇加工方法，制定工藝路線 3
3.1 定位基準的選擇 3
3.2 零件表面加工方法的選擇 4
3.3 制訂工藝路線 4
4 工序設計 5
4.1 Φ9mm孔 5
4.2 確定切削用量及基本工時 6
5 夾具設計 7
5.1定位方案 7
5.2夾緊機構 7
5.3導向裝置 8
5.4夾具體 8
6 方案綜合評價與結論 8
7體會與展望 8
8參考文獻 10