扭結式糖果包裝機設計-扭結手

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，有疑問咨詢QQ:414951605 或 1304139763 摘 要 顆粒狀糖果包裝機設計是典型的機械系統設計，它不僅包括機構的尺寸、強度設計，還包括了傳動機械系統設計。本設計主要是針對圓臺柱狀巧克力糖的鋁箔紙包裝。設計主要內容有三方面：設計方案設計、機械手及進出糖機構設計與傳動系統鏈設計。 機械手及進出糖機構設計是本設計功能能否執行的靈魂，它也是本設計的設計重點之一。它要實現巧克力糖的輸入、折邊、抄底邊、等等功能，直到最后由輸送帶輸出。整個系統功能實現中，機械手要實現的是夾糖、折邊、轉送等重要功能，因此對機械手的形狀、夾緊力及轉位角度也提出了不同的設計要求，設計機械手時，也始終回繞著這幾點進行。 傳動系統設計，作為一個動作執行系統，動力是必不可少的，當然對動力的傳遞系統也就顯得尤其重要了。系統功能中要實現機械手轉位、送糖盤轉位、供紙、剪紙、抄紙、接糖、頂糖及撥糖等功能，它們都需要不同大小的動力，這就需要傳動系統的調節。如在機械手的轉位功能中，為實現間歇的轉位功能就得通過傳動鏈中的槽輪機構來實現，該機構要保證機械手在轉到位后，有一定的停留時間，從而為頂糖、接糖及撥糖功能的實現提供必要的機械動作執行時間。設計好的包裝機機構正常的生產率為120r/min，且其生產率可在70～130r/min. 關鍵詞：包裝機，巧克力糖包裝，機械手。 Abstract The grain candy packer design is a typical machine system design. It not only included the organization's size, strength...etc. the design. And it still included the design of the transmission system. This design primarily aims at the circle pillar chocolates' aluminum foil packing. The design only contents contain three sides: Design project design, machine hand and I/O sugar mechanism design and the transmission system design. It is Soul whether the function of the machine hand and I/O sugar mechanism’s design can carry out in this design. It is also one of the design points of this design. It wants to realize the importation, fold of the chocolates the sides, etc. the function. Until it finally be output by belt conveyer. In whole system function realizes, the machine hand realizes many important function, for example: clip the sugar, fold of the chocolates the sides, transfer...etc. Therefore to the shape of the machine hand, clip the tight dint and turn the angle also bring upped the different design request. When designed the machine hand, it is also proceeding with the center of these points. System, motive is necessary. Certainly it is particularly important of the power transmission system. In the system function, it must realize moving the machine hand, moving the sugar dish, providing the paper, cutting paper, curling, connecting the sugar, crest the sugar and dialing the sugar etc. All these functions need the different power. It can be controlled with the transmission system. Such as the function of turning machine hand, for realizing a function of intermittent turning it needs the sheave of the transmission to regulate. After the machine turned the assurance position, the mechanism wants to have certainly stop over time, it can take enough time to crest sugar, connect the sugar and dial sugar. The transmission system still guaranteed the normal rate of production of packer to 120 r/ min .At the same time it can be controlled the rate of production at 70 ～ 130 r/ min. Key words: Packer, chocolates packing, machine hand.