懸杯式蔬菜移栽機的設計含開題及12張CAD圖

懸杯式蔬菜移栽機的設計含開題及12張CAD圖,懸杯式,蔬菜,移栽,設計,開題,12,十二,cad 論文題目：懸杯式蔬菜移栽機的設計論文題目：懸杯式蔬菜移栽機的設計 姓 名：XXXX 學 號：XXXX 指導老師：XXXX 專業班級：XXXX第一章 研究意義 研究意義：設計一種結構簡單、成本低廉的蔬菜缽苗移栽機，來滿足現階段我國廣大蔬菜種植戶對實現移栽作業機械化的迫切要求。懸杯式蔬菜移栽機的整機結構圖懸杯式蔬菜移栽機的整機結構圖1.懸杯式栽苗器 2.缽苗架 3.傳動系統 4.懸掛裝置5.限深輪 6.開溝器 7.機架8.栽植輪架 9.栽植輪 10.地輪 11.覆土鎮壓輪 12.座椅第二章 工作原理栽植機構工作原理圖栽植機構工作原理圖1.1.栽苗器栽苗器 2.2.主動栽植輪主動栽植輪 3.3.偏心栽植輪偏心栽植輪栽苗器運動軌跡示意圖特征系數:懸杯式栽苗器的結構簡圖1.懸杯 2.連桿機構 3.彈簧 4.凸輪 5.導軌 6.凸輪軸謝謝各位老師！ G.V. Prasanna Kumar a, *, H. Rahe a Department of Agricultural Engineering, North Arunachal Pradesh, India b Agricultural and Food Engineering Department, article info Article history: Received 1 May 2011 Received in revised form 2011 IAgrE. Published by Elsevier Ltd. All rights reserved. production of 129 million metric tons and yield of 16.2 metric tons ha C01 in the year 2008e2009 (Government of India, 2009). About 175 types of vegetables are grown in India including 82 fieldvegetables and 41root (tuber and bulb) crops (Randhawa, 1998;Subramanian,Varadarajan, fax: 91 360 2258533/2257872. Available at biosystems engineering 110 (2011) 189e197 E-mail address: (G.V.P. Kumar). 1. Introduction India is the second largest producer of vegetables with the vegetables like cucurbits (Cucurbita spp.), beans (Phaseolus spp.), okra (Abelmoschus esculentus) and leafy vegetables are sown directly in the field. Vegetables like tomato (Solanum evaluated for transplanting tomato at 45 C2 45 cm spacing in the field at a forward speed of 0.9 km h C01 . Field capacity of the transplanter was found to be 0.026 ha h C01 .Itresulted in the saving of 68% labour and 80% time over the conventional method of manual transplanting. The planting rate of the transplanter was found to be 32 pot seedlings min C01 with 4% missed planting and 5% tilted planting. The soil covering efficiency of the developed vegetable transplanter was about 81% and the quality of transplanting was satisfactory. 17 July 2011 Accepted 1 August 2011 Published online 30 August 2011 1537-5110/$ e see front matter 2011 IAgrE. doi:10.1016/j.biosystemseng.2011.08.001 man b Eastern Regional Institute of Science and Technology, Nirjuli 791109, Itanagar, Indian Institute of Technology, Kharagpur 721302, West Bengal, India A 9.75 kW walk-behind type hand tractor powered 2-row fully automatic vegetable transplanter for individual paper pot seedlings was developed by considering the power availability, paper pot dimensions and space availability in the hand tractor after the complete removal of rotavator tillage assembly. It consisted of two sets of feeding conveyor, metering conveyor, seedling drop tube, furrow opener, soil covering device, an automatic feeding mechanism, a depth adjustment wheel and hitching arrangement. Horizontal slat-type chain conveyor was used as feeding conveyor and horizontal pusher type chain conveyor was used as metering conveyor. The automatic feeding mechanism, with a timing shaft, cam and clutch, was used to coordinate the working of feeding and metering conveyors. The vegetable transplanter carried 108 seedlings on two feeding conveyors in upright orientation, fed them to the metering conveyors and planted them in upright orientation in furrows. The performance of the vegetable transplanter was vegetable transplanter for paper pot seedlings Development of a walk-behind type hand tractor powered Research Paper journal homepage: www.elsevi Published by Elsevier Ltd. All rights reserved. 2. Paper pot seedlings for mechanical transplanting Paper pots seedlings were grown in aluminium trays in a double layer polyethylene-covered unheated greenhouse. The ready-to-plant paper pot seedling of tomato 21 days after seeding and following 4 days of hardening is shown in Fig. 1. Eachseedlingwasgrowninadoublelayeredcubicalpaperpot of 50 cm 3 volume filled with vermicompost, soil and sand in the proportion of 1:1 :1 by volume. The volume of pot and the proportion of ingredientsin thesoil-basedvermicompost- amendedmix weredetermined by conducting experiments in two different seasons (Kumar Sakaue, 1992; Shaw, biosystems engineering 110 (2011) 189e197190 often results in non-uniform plant distribution (Kumar Manes, Dixit, Sharda, Singh, Parish, 2005). Tractor-mounted 2-row and 3-row semi-automatic vege- tabletransplantershave beendevelopedin Indiafor bare-root seedlings and plugs (DARE, 2006, pp. 109e128; Manes et al., 2010). Pocket-type metering devices have been provided in the transplanters for bare-root seedlings. The field capacity and labour requirement have been reported to be 0.082e0.092 ha h C01 and 44.4 man-h ha C01 respectively at a forward speed of 0.8e1.0 km h C01 . Rotary cup-type metering devices have been provided in the transplanters for plugs. They had a field capacity of 0.14 ha h C01 and labour require- ment of 28.6 man-hha C01 when operated at a forwardspeedof 1.4 km h C01 . The quality of transplanting was reported to be satisfactory for both the machines. Farmers in India allocate a relatively low proportion of their land for vegetables (Birthal, Joshi, Kumar Ueno, Matsumura, Suggs et al., 1987; Tsuga, 2000; Yonetani, Matsumoto, Manes et al., 2010). The selected range of forward speed of the hand tractor could be obtained when operated in 1st low gear at 50e90% throttle. The engine performance curves indicated the brake horse- power of the engine at 50% throttle (1200 rpm) as 4.5 kW. About 20% of engine output power is available at the wheel axle of the hand tractor when it is fitted and operating its rotavator (Bhole Satpathy Manes et al., 2010). Fully automatic transplanters have a planting rate of above 60 seedlings min C01 (Suggs et al., 1987; Shaw, 1997; Tsuga, 2000). bare-root seedlings (MTB). 300 biosystems engineering 110 (2011) 189e197 195 Particulars Field capacity, ha h C01 0.026 Labour requirement (including refilling), man-h ha C01 102.46 Missed planting, % 4.01 Tilted planting, % 5.14 Partially soil covered seedlings, % 7.39 Excessive soil covered seedlings, % 11.90 Cost of operation (including refilling), ha C01 29,954, 27,769, 26,996 use of 100, 200, Cost of paper pots and mix, transplantingusingAVTandmanualmethodoftransplanting of paper pot seedlings (MTP) and bare-root seedlings (MTB) is shown in Table 3. 7.1. Field capacity and labour requirement At an average forward speed of 0.9 km h C01 , the percent wheel of slip of hand tractor varied from 2.50 to 3.73%. The average fuel consumption was 1.42 l h C01 . The mean (C6standard devi- ation) depth of placement of pot seedlings was 6.3 (C61.5) cm. ThefieldcapacityoftheAVTwasfoundtobe0.026hah C01 with a field efficiency of 31.88%. Park et al. (2005) reported the field capacity of 0.045 ha h C01 for the self-propelled walk-behind type fully automatic vegetable transplanter for Chinese cabbage. The labour requirement for transplanting using the AVT was found to be 103 man-h ha C01 . This included the labour requirement of 25 man-h ha C01 for refilling of missed plant- ings and correct placement of tilted plantings. The conven- tional manual transplanting required 229 and 320 man- hha C01 for paper pot and bare-root seedlings, respectively (Table 3). Thus, mechanical transplanting by AVT resulted in the saving of 55% labour and 72% time over the manual transplanting of paper pot seedlings, and 68% labour and 80% time over manual transplanting of bare-root seedlings, respectively. Saving of labour and time in the range of 70e93% and 75e78%, respectively have been reported for the tractor operated 2-row semi-automatic vegetable trans- planters in India (Chaudhury et al., 2002; Manes et al., 2010; Table 3eComparison of field performance of AVT with manual ha C01 20,000 Parket al.(2005)reportedmissedplantingof 2.2e3.0%for self- propelled walk-behind type fully automatic vegetable trans- planter that used plug seedlings. Missed planting rates of 2.9e9.3%, 3e4% and 2.9e3.5% have been reported by Choudhury et al. (2002), Manes et al. (2010), and Satpathy and Garg (2008), respectively for semi-automatic vegetable trans- planters that used bare-root seedlings. In the semi-automatic vegetable transplanters, missed plantings occurred when the labourerfailedtofeedthemeteringunitwiththeseedlingdue to higher speed of operation. In the present study, missed plantings occurred due to damage to pots during the conveying process by the metering conveyor. Missed plant- ings due to failure of the pick-up system of a fully automatic vegetable transplanter to remove seedlings from the tray accounted for 3.5% (Kim, Park, & Kwak, 2001). Missed planting of 4% has been reported for chain of paper pot seedlings in a fully automatic vegetable transplanter (Tsuga, 2000). Choudhury et al. (2002) reported tilted planting of 4. 0e13.4% for the semi-automatic vegetable transplanter and it was attributed to soil condition in the field. In the present study, pot seedlings got tilted after falling in upright orientation in the furrow due to unevenness of the furrow soil and partial covering of the soil around the seedling pots. The soil covering efficiency of the vegetable transplanter was found to be about 81%. About 12% of the pot seedlings were covered with excessive amount of soil and about 7% of the pot seedlings were partially covered with soil (Table 3). The plant distribution and soil cover around the seedlings were almost uniform in the field transplanted manually with method of transplanting of paper pot seedlings (MTP) and AVT MTP MTB 0.0087 0.0066 228.62 319.83 ee e 6.0 e 28.0 and 26,584 for annual and 400 h 24,294 5997 20,000 0.00 use in developing countries: a review. International Journal of Vegetable Science, 14(3), 232e255. biosystems engineering 110 (2011) 189e197196 The initial cost of the walk-behind type hand tractor was taken as 120 000 (US$ 2700). Its typical annual use would be 800 h on small and medium farms (NABARD, 2007). Assuming a ten year life, and depreciation and interest at 10% p.a., the cost of operation of hand tractor alone is 120 (US$ 2.7) per hour for 800 h of annual use. The initial total cost AVT was taken as 60 000 (US$ 1350). Its useful life was assumed to be 10 years. The cost of preparation of paper pot along with potting mix of 405 (US$ 9) per 1000 pots was added as addi- tional cost. Cost of mechanical transplanting using AVT was found to be 4.4e5.0 times higher than that of conventional manual transplanting of bare-root seedlings (Table 3). The cost of paper pots and potting mix was the major component of the cost of operation using paper pot seedlings. It accounted for 67e75% of the total cost of mechanical transplanting and 82% of the total cost of manual transplanting. Singh (2008) repor- ted 23.9% saving in cost for tractor operated 2-row semi- automatic vegetable transplanter and Park et al. (2005) reported 29% saving in cost for walk-behind type fully auto- matic vegetable transplanter over conventional method of transplanting vegetables. Parish (2005) stated that automatic vegetable transplanters are expensive and require a very high level of plant quality and uniformity. The higher cost of mechanical transplanting in the present study could be attributed to the high cost of preparation of paper pot seed- lings and low field efficiency (31.88%) of the AVT. The low values of field capacity and field efficiency of the AVT could be attributed to a loss of 68% of the total operating time. Time loss in placing the pot seedlings on feeding conveyors accounted for 50% of the total operating time. About 18% of total operating time was lost during depth adjustment, operation of clutches and turning at the head- land.This is a substantial loss of timeand it has to be reduced to improve the field coverage. Efforts are being made to develop a mechanical system for the quick transfer of pot seedlings (as a rectangular array) from the tray to the feeding conveyor using a multi-celled tray with replaceable base. Efforts are also being made to reduce the time involved in turning at the headland. 8. Conclusions This is the first attemptto develop a fully automatic vegetable transplanter for individual paper pot seedlings using walk- behind type hand tractor as the source of power. Use of AVT has been found to save 68% labour and 80% time involved in transplanting of vegetables besides increasing the annual use pot seedlings. The plant distribution was also observed to be almost uniform in the field transplanted manually with bare- rootseedlings.However,about6%oftheseedlingswerefound to be tilted and about 28% of the seedlings were found to be excessively covered with soil after manual transplanting of bare-root seedlings. 7.3. Cost of operation of the hand tractor in small farms. Cost of operation has been found to be 4.4e5.0 times higher than that of conventional Kumar, G. V. P., & Raheman, H. (2010). Volume of vermicompost based potting mix for vegetable transplants determined using fuzzy biomass growth index. International Journal of Vegetable Science, 16(4), 335e350. Manes, G. S., Dixit, A. K., Sharda, A., Singh, S., & Singh, K. (2010). Development and evaluation of tractor operated vegetable transplanter. Agricultural Mechanization in Asia Africa and Latin America, 41(3), 89e92. manualmethodoftransplantingbare-rootseedlings.Beingthe first prototype, field capacity and field efficiency of the AVT is low. Efforts are being made to increase the field capacity and field efficiency by reducing the time involved in placing pot seedlingsonthefeedingconveyorintheformof arectangular array and turning of the machine at the headland. references Armstrong, E. C., & Hanacek, W. A. (1984). Automatic soil plug loader. US patent No. 4443151. Bhole,N. G., & Tiwari, A. D. (1977). Powerlossesin powertillers. The Harvester(IndianInstituteofTechnology,Kharagpur,India),19,62e66. Birthal, P. S., Joshi, P. K., & Thorat, A. (2007). Diversification of Indian agriculture towards high value crops: the role of small holders. Washington: International Food Policy Research Institute. Chaudhuri, D., Singh, V. V., & Dubey, A. K. (2002). Refinement and adoption of mechanical vegetable transplanters for Indian conditions. Agricultural Engineering Today, 26(5-6), 11e20. DARE. (2006). Agricultural engineering and technology. In DARE/ICAR Annual Report 2005-06. New Delhi, India: Department of Agricultural Research and Education, Ministry of Agriculture, Government of India. Dewangan, K. N., & Tewari, V. K. (2008). Characteristics of hand- transmitted vibration of hand tractor used in three operational modes. International Journal of Industrial Ergonomics, 39(1), 239e245. Furuki, T., Yamanishi, H., Matsumoto, H., Honma, Y., & Takada, K. (2003). Folding paper type biodegradable paper pot. Shizuokaken Nogyo Suisanbu, Kankyo Shinrinbu Norin Suisan Kankei Shiken Kenkyu Seika Joho, 2002,26e27, (In Japanese). Ghai, T. R., & Arora, D. (2007). Horticulture vegetable science (vegetables, tubers and spice crops), in tropical and subtropical vegetables. New Delhi, India: National Science Digital Library, National Institute of Science Communication and Information Resources, Council of Scientific and Industrial Research. Government of India. (2002). Agricultural census 2002. New Delhi, India: Agricultural Census Division, Ministry of Agriculture. Government of India. (2009). Indian horticultural database-2009. New Delhi, India: National Horticultural Board, Ministry of Agriculture. Kathirvel, K., Manian, R., & Balasubramanian, M. (2001). Tractive performance of power tiller tyres. Agricultural Mechanization in Asia Africa and Latin America, 32(2), 32e36. Kim, H. J., Park, S. H., & Kwak, T. Y. (2001). Development of an automatic transplanter for cabbage cultivation. Seoul, Korea: Korea automatic dynamic analysis of mechanical systems conference, 8e9 Nov. Kumar,S., Pal, S., & Joshi, P. K. (2004). Vegetable sector in India: an overview. In Proceedings of national seminar on impact of vegetable research in India, (pp. 9e34). New Delhi, India: National Centre for Agricultural Economics and Policy Research. Kumar, G. V. P., & Raheman, H. (2008). Vegetable transplanters for NABARD.(2007).Use ofpower tiller inagriculturaloperations.Mumbai, India:NationalBankforAgriculture and Rural Development. Nambu, T., & Tanimura, M. (1992). Development of automatic transplanter using chain pot for vegetable crops. Acta Horticulturae, 319, 541e546. Parish, R. L. (2005). Current developments in seeders and planters for vegetable crops. HortTechnology, 15(2), 1e6. Park, S. H., Kim, J. Y., Choi, D. K., Kim, C. K., Kwak, T. Y., & Cho, S. C. (2005). Development of walking type Chinese cabbage transplanter. Journal of the Korea Society for Agricultural Machinery, 30(2), 80e81. Randhawa, K. S. (1998). Recent advances in efficiency of vegetable growing in India. Acta Horticulturae, 220,35e44. Roul, A. K., Raheman, H., Pansare, M. S., & Manchavaram, R. (2008). Predicting the draught requirement of tillage implements in sandy clay loam soil using an artificial neural network. Biosystems Engineering, 104(4), 476e485. Sakaue, O. (1992). Development of automated seedling production and transplanting system using robotics. Acta Horticulturae, 319, 557e562. Satpathy, S. K., & Garg, I. K. (2008). Effect of selected parameters on the performance of a semi-automatic vegetable transplanter. Agricultural Mechanization in Asia, Africa and Latin America, 39(2), 47e51. Shaw, L. N. (1997). Automatic transplanter for vegetables. Proceedings of Florida State Horticultural Society, 110, 262e263. Shaw, L. N. (1999). Removing and handling modular vegetable seedlings from nursery trays. Proceedings of Florida State Horticultural Society, 112, 153e155. Singh, S. (2008). Research highlights. All India coordinated research project on farm implements and machinery. Bhopal, India: Central Institute of Agricultural Engineering. Subramanian, S. R., Varadarajan, S., & Asokan, M. (2000). India. In M. Ali (Ed.), Dynamics of vegetable production, distribution and consumption in Asia (pp. 99e138). Shanhua, Taiwan: Asian Vegetable Research and Development Centre, Asian World Vegetable Centre. Suggs, C. W., Peel, H. B., Thomas, T. N., Eddington, D. L., Gore, J. W., & Seaboch, T. R. (1987). Self feeding transplanter for tobacco and vegetable crops. Applied Engineering in Agriculture, 3(2), 148e152. Tsuga, K. (2000). Development of fully automatic vegetable transplanter. Japan Agricultural Research Quarterly, 34(1), 21e28. Ueno, H., Matsumura, N., & Miyaji, M. (2002). In Bulletin of experimental farm. Effects of biodegradable pot on growth and quality of pumpkin seedling, 24. Matsuyama, Japan: Faculty of Agriculture, Ehime University. Yonetani,T.,Matsumoto,I.,&Okishio,Y.(1999).Developmentand improvement of a transplanter for leafy vegetables. Bulletin of Hyogo Prefectural Agricultural Institute, 47,44e47, (In Japanese). biosystems engineering 110 (2011) 189e197 197