精煉爐鋼包設計【鋼包精煉爐】【說明書+CAD+PROE】
精煉爐鋼包設計【鋼包精煉爐】【說明書+CAD+PROE】,鋼包精煉爐,說明書+CAD+PROE,精煉爐鋼包設計【鋼包精煉爐】【說明書+CAD+PROE】,精煉爐,鋼包,設計,說明書,仿單,cad,proe
機械工程系
機械設計與制造
機械加工工序卡片
產品型號
零件圖號
產品名稱
十字軸
零件名稱
共
頁
第
1
頁
車間
工序號
工序名稱
材 料 牌 號
機加工車間
1
粗車四端面
16Mn
毛坯種類
毛坯外形尺寸
每毛坯可制件數
每 臺 件 數
模鍛件
1
1
設備名稱
設備型號
設備編號
同時加工件數
臥式車床
CA6140
1
夾具編號
夾具名稱
切削液
三抓卡盤
工位器具編號
工位器具名稱
工序工時 (分)
準終
單件
工步號
工 步 內 容
工 藝 裝 備
主軸轉速
切削速度
進給量
切削深度
進給次數
工步工時
r/min
m/min
mm/r
mm
機動
輔助
1
粗車軸380端面1
YT5硬質合金可轉位車刀
游標卡尺
2.0
1.47
0.39
0.3
1
4s
2
粗車軸360端面2
2.0
1.47
0.39
0.3
1
4s
3
粗車軸285端面3
2.0
1.47
0.39
0.3
1
4s
4
精車軸380端面4
2.0
1.47
0.39
0.3
1
4s
5
精車軸360端面4
6
銑軸的斜端面
設 計(日 期)
校 對(日期)
審 核(日期)
標準化(日期)
會 簽(日期)
肖楊閔
20130701
標記
處數
更改文件號
簽 字
日 期
標記
處數
更改文件號
簽 字
日 期
鋼包設計 I 摘要 鋼包精煉爐,是用來對初煉爐(電弧爐、平爐、轉爐)所熔鋼水進行精煉,并 且能調節鋼水溫度,工藝緩沖,滿足連鑄、連軋的重要冶金設備。鋼包爐是爐 外精煉的主要設備之一。鋼包精煉爐主要功能:1、使鋼液升溫和保溫功能。鋼 液通過電弧加熱獲得新的熱能,這不但能使鋼包精煉時可以補加合金和調整成 分,也可以補加渣料,便于鋼液深脫硫和脫氧。而且連鑄要求的鋼液開澆溫度 得到保證,有利干鑄坯質量的提高。 關鍵詞:鋼包;液壓;滑動水口 II Abstract Ladle Turret in continuous casting machine is pouring position over the top of the ladle used to carry cross and bearing steel casting equipment packages,it is the most commonly used in modern continuous casting and the most common bearing steel ladle for pouring the key machinery and equipment.In this paper, we make a design calculations for the Ladle Turret slewing device system, helping to optimize the large package of turret structure, reduce costs and increase the economic efficiency.This topic is mainly making a design calculation of correlation of Ladle Turret slewer , including the calculation of the drives power , the selection of the electrical machine and electrical machine ,the checking of exposed gear ,the selection and checking of exposed gear ,the checking of coupling bolt and foundation bolt. Keywords:The Ladle ;hydraulic;slide gate 3 第一章 總論 1.1 鋼包精練爐的簡介 鋼包精煉爐,是用來對初煉爐(電弧爐、平爐、轉爐)所熔鋼水進行精煉, 并且能調節鋼水溫度,工藝緩沖,滿足連鑄、連軋的重要冶金設備。鋼包爐是 爐外精煉的主要設備之一。鋼包精煉爐主要功能:1、使鋼液升溫和保溫功能。 鋼液通過電弧加熱獲得新的熱能,這不但能使鋼包精煉時可以補加合金和調整 成分,也可以補加渣料,便于鋼液深脫硫和脫氧。而且連鑄要求的鋼液開澆溫 度得到保證,有利干鑄坯質量的提高。2、氬氣攪拌功能。氬氣通過裝在鋼包底 部的透氣磚向鋼液中吹氛,鋼液獲得一定的攪拌功能。3、真空脫氣功能。通過 鋼包吊入真空罐后,采用蒸汽噴射泵進行真空脫氣,同時通過包底吹入氬氣攪 動鋼液,可以去除鋼液中的氫含量和氮含量,并進一步降低氧含量和硫含量, 最終獲得較高純凈度的鋼液和性能優越的材質。鋼包精煉爐的應用對整個企業 來看,至少可增加如下得益:加快生產節奏,提高整個冶金生產效率。應用領 域:鋼包精煉爐被廣泛用于工業、鋼鐵、冶金等行業。 1.2 鋼包精煉爐的研究意義 爐外精煉技術由于其具有提高鋼質量、加快產量、降低成本、改善勞動條件 和生產環境條件等優點日益成為全世界鋼鐵行業的新寵。鋼包精煉爐以其冶金 效果好、具有設備費用低、易于操作等特點而成為爐外精煉技術有代表性的設 備,正得到普遍應用。 1.3 鋼包精煉爐的研究背景 鋼鐵是國民經濟的中流破柱,是國家生存和發展的物質保障。鋼鐵工業在國 民經濟的發展過程中,起著舉足輕重的作用,是國民經濟水平和綜合國力的重要 標志。我國是發展中國家,正大力發展其國民經濟,這使得我國對鋼鐵材料的需 求量增大。同時我國也是鋼鐵產量世界第一的鋼鐵大國,在國民經濟高速發展的 今天,社會對鋼材尤其是高質量鋼材的需求不斷加大,這就需要我們?yōu)殇撹F強國 的偉大目標努力奮斗。在一段時期之內,鋼鐵工業仍將是我國經濟的支柱之一。 20 世紀以來,鋼鐵產品被廣泛地應用在建筑、機械、汽車、船舶、石油和 運輸?shù)雀鱾€行業中。因此,鋼鐵一直是國民經濟的基礎工業之一?,F(xiàn)如今,雖然 出現了許多新材料,例如陶瓷、塑料、高分子復合材料等等,這些新材料由于自 身的一些特點在一定程度上取代了鋼材,但是鋼材具有其它材料不可比擬的綜合 性能。同時,與其它材料相比,鋼材價格波動趨勢相對較小。所以,鋼鐵材料仍是 當代最主要的材料之一。 隨著市場經濟的持續高速發展,使得企業的規模和產量越來越大,鋼鐵工業 4 也通過加快結構優化與調整,不斷提高滿足國民經濟對鋼材產量、品種、質量、 成本等全面要求的能力。但是,隨之而來的市場競爭又使各企業面臨著生產規模、 經濟效益、產品質量和環境保護等方面的嚴峻挑戰。企業要想立于不敗之地,必 須提高自身的競爭能力,提高生產效率、降低成本、降低能源消耗和原材料消耗、 減輕對環境的污染和改進產品質量,以適應快速多變的市場需求。 近 20 多年來,由于人類社會的飛速發展對鋼材尤其是優質鋼材、特殊鋼材 的需求越來越大,而隨著科學技術的發展,鋼材的冶煉技術也發生了質的變化。 煉鋼爐的容量不斷擴大,超高功率電爐普遍應用于生產,連續鑄鋼技術也円臻完 善。因此,煉鋼的方法也發生了巨大的變化,由原始的一步煉鋼法發展成為二步 煉鋼法即爐內初煉、爐外精煉。爐外精煉技術由于其具有提高鋼質量、加快產 量、降低成本、改善勞動條件、改善生產環境條件等等優點已日益成為全世界 鋼鐵行業的新寵,發展極其迅速。全世界各大鋼鐵企業紛紛加大了對鋼水爐外精 煉的研究力度,研制了多種鋼水爐外精煉的設備,尤其是提出了各種各樣的理論 和控制方法,并已創造了極其可觀的經濟效益。 1.4 實施方案及主要研究手段 (1)本課題對現有鋼包精煉爐進行改進,重點解決現有鋼包精煉爐的缺 陷。 (2)根據鋼包精煉爐的材料性質,確定工藝材料的選擇(3)通過對已有的 鋼包精煉爐的結構進行改進,主要改善鋼包包體、滑動水口、吹氬口。 1.5 設計(論文)的主要內容(理工科含技術指標): (1) 參閱相關資料,了解和掌握鋼包精煉爐工作原理及其發展,并查閱和收集 相關資料; (2) 完成原理方案設計和結構方案設計,確定實施方案; (3) 對鋼包精煉爐結構進行設計; (4) 鋼包起吊軸加工工藝規程設計; (5) 對鋼包滑動水口的結構改善,并對結果進行分析; (6) 完成所設計部件的裝配圖和零件圖。 5 第 2 章 鋼包設計 2.1、 鋼包尺寸計算 (1)鋼包容納鋼水量。鋼包的容量應于轉爐的最大出鋼量相匹配,設鋼包的 額定容量為 。一般考慮應用 10的過裝余量,則鋼包內鋼水實際容量為()Pt =1.1250=275t0.1.P (2)鋼包內渣量。出鋼時一般將爐內熔渣全部或絕大部分隨鋼水水傾入鋼包。 采用留渣出鋼操作者除外,但留渣出鋼操作時在鋼桶中要新加渣料熔融成新渣 層覆蓋。渣量一般為金屬量的 35,設計時取較大比例為 15。即渣量為: 15%0.15P (3)鋼包的容積。根據鋼包實際容納金屬液與熔渣量計算容積。鋼液比容取 為 0.14 ,熔渣比容取為 0.28 。因此,鋼與渣的總體積即鋼包容積應3/mt 3/mt 為: =0.141.1 +0.280.15 =0.20 ( ),若采用 1,錐度為VPP3DH 15,則鋼包下部內徑(鋼包內空間尺寸見圖 1): =0.8515%HDD 圖 1 鋼包內空間尺寸 鋼包的容積按圓錐臺計算: 2()1HVD 6 將 , 帶入上式得: HD0.85H 30.67VD 又因?yàn)殇摵驮w積為 =0.20 ,故 =0.20PVP3.1133.2()0.67 從而可得鋼包基本尺寸與容量的關系使如下: ; ; 130.67DP130.67HP130.567HDP 上面三個計算式是根據內襯厚度上下一致的情況下推出的。各部設計過程 參考(鋼鐵廠設計下冊,李傳薪主編 P128-129)從而得到各部分參數如圖 2 所示。 圖 2 鋼包各部分尺寸 1) 0.1.dHJD1外 殼 內 高 2) 2 D外 殼 全 高 = 3) 12.7.14bJ外 殼 上 部 內 徑 + 4) 2 0.6外 殼 上 部 外 徑 D 5) 30.9HbJ外 殼 下 部 內 徑 = 7 6) 4321.0bD外 殼 下 部 外 徑 = 說明: (1)盛鋼桶磚襯厚度。盛鋼桶磚襯包含保溫層(外層)與耐火工作層(外層), 一 般砌筑總厚度 100250mm。工作層砌磚有多種型式,陳列入標準的盛鋼桶襯磚 磚型外,可針對專用盛鋼桶依據其錐度、直徑、高度等參數設計專用襯磚,則 砌筑工作更為方便順利,砌筑質量也較高。 鋼桶桶壁厚度約等于 0.07D ; :包壁厚度(上下一致) ,bJdJm D:鋼包上部內徑, m :鋼包底襯厚度, ( =0.10D)bJb :鋼包殼壁厚, ( =0.01D) :鋼包殼底厚, ( =0.012D)d d 磚襯部分加厚則須加以擴大修正,亦即增大 值方能保證實際容積為 0.20P 表示為: K =0.20P 。K 為 0930.96 的一個系數。意義是磚襯部分加30.67D 厚使容積減小了 47,為彌補容積之不足故在式中乘以系數 K 并得下部內徑 (一般 為 3060 ,取 為 45 ) 。.85HDm1/306(.9)P =4.289 1/37250.4 =3.4668HDm 表 1 鋼包各部分尺寸值 參數名稱 數值(mm) 參數名稱 數值(mm) D 4289 H4289 8 1D4889 1H47182 4975 247693 4246 dJ4294D 4332 b300d 51 43 上述鋼包設計的凈空高度為300400mm , 為了適應現代真空冶煉的需要通常增 大鋼包的凈空高度。RH 要求鋼包的凈空達400mm 以上即可。本設計中取鋼包的 凈空高度為800mm 從而得到鋼包的各部分尺寸如下表2所示 表 2 改進后鋼包各部分的值 參數名稱 數值(mm) 參數名稱 數值(mm) D 4289+120 H4289+8001 4889+137 14718+8002 4975+139 24769+8003 4246+119 dJ4294D 4332+121 b300d 51 43 2.2、鋼包質量 鋼包質量的精確計算須完成外殼、吊掛耳抽、支撐腿及滑動水口等結構計 算后,根據詳細圖紙進行計算,但由上述已經確定的主要尺寸參數與選材亦可 以較粗略地算出鋼包的質量。 (1)包襯質量。磚襯總體積體積與總質量為: 桶壁磚襯體積為: 9 222223(1.4)(0.9).1.4(0.85).0.19bDVDDD 桶底磚襯體積為: 23(0.9).74d 磚襯總體積: 3330.219D.0.296DV襯 磚襯總質量(現取平均密度約 1.81 計算)/tm33333W.71.80.19.5D襯 (2)外殼鋼板質量 桶底鋼板體積: 23(.0).4D 桶壁鋼板體積: 3(1.6.)1.50.9D 外殼鋼板質量: 3W09784殼 (3)空鋼包質量 ,將式 代入得:3.1D1襯 殼 13.6P 0.273P 即空盛鋼桶質量約為鋼桶額定容量值的 2728。考慮到其它未計入的鋼 結構件與耐火磚(塞仔磚或滑板)質量,應增加約 10,則空桶質量為額定容量 值的 3031。 (取為 30%)103WP( . ) =0.3250=75 ( t) (4)裝滿鋼水與熔渣后的總質量。鋼包容量按過裝 10%計算,渣量為金屬量 15%計 算,則裝滿鋼水和渣后的質量為: 21.P065.273P1.58 =1.538250=384.5t 10 因此,在選用澆注起重機時,其起重容量應大于 加門形吊鉤的質量。門2W 形吊鉤有固定在盛鋼桶上(與耳鈾餃接)和脫鉤式兩種,均須計入起重總量。 2.3 鋼包重心計算 計算鋼包的重心是為了確定鋼包耳軸的高低位置,使裝滿鋼水與熔渣的鋼包 吊運與澆注過程穩定,無傾翻的危險;又要使其在傾倒出殘鋼與鋼水時不需太 費力。計算重心是采用力學常規的計算方法。 對于盛鋼桶而言,如簡化不計澆注操作機構(塞桿或滑動鑄口)的質量,即 忽略它們在盛鋼桶上所引起的重心偏移,則可視盛鋼桶桶體,內襯及鋼水、熔 渣是圍繞鉛垂軸線完全對稱的。故計算重心只考慮堅直方向的距離即可以了。 (1)鋼桶桶壁磚襯的重心點 由計算可得桶壁磚襯重心距上口為: 01.487yD (2)盛鋼桶底磚襯的重心點 由計算可得桶底磚襯重心距上口為: 02.5 (3)外殼側壁之重心點 由計算可得外殼側壁重心距上口為 03.7yD (4)底殼的重心點 由計算可得底殼重心距上口為 041.6 (5)渣層的重心點 由計算可得渣層重心距上口為 05.9yD (6)盛鋼桶內金屬的重心點 由計算可得盛鋼桶內金屬重心距上口為 06.581 (7)總重心。已知盛鋼桶各部分重心的所有數據,總重心就可以求出。因盛 鋼桶是對稱的,所有重心都在對稱袖上,根據合力靜力矩等于合力靜力 矩之和的原理,可列出下列方程式: 01020300.mWyyWy = 2.538P 11 裝滿鋼水的盛鋼桶質量: 321.58.6WD 鋼水量: 31.6.70P 化簡得: 02795D.4.y =0.544.289=2.3160 m 同時,為了使盛鋼桶穩定,必須使耳軸中心線與盛鋼桶上緣的距離小于 0.54D。同樣計算方法,可得空盛鋼桶之重心位置 ,亦即空盛鋼0.642yD 桶較盛滿鋼水、熔渣時重心為低,此時更為穩定,無傾覆之危險。 表 3 鋼包各部分參數 參數名稱 數值(mm) 參數名稱 數值(mm) D 4409 H50891 5026 155182 5114 255693 4365 dJ4294D 4453 b300d 51 430y 2.316 12 第三章 鋼包滑動水口設計 隨著快速、高效連鑄和二次精煉技術及工藝的發展,滑動水口 (Sliding Nozzle,簡稱 SN)系統在現代鋼鐵冶煉過程中變得越來越重要, 成為冶煉中不可缺少的部分。它是連鑄機澆鑄過程中鋼水的控制裝置,能夠 精確地調節從鋼包到連鑄中間包的水流量,使流入和流出的鋼水達到平衡, 從而使連鑄操作更容易控制。滑動水口系統因其可控性好,能提高煉鋼生產 效率而得到了迅速發展?,F(xiàn)在,在鋼包、中間包上國內外普遍使用了滑動水 口系統。 滑動水口的設計早在 1884 年就由美國人 D. Lewis 提出構思并申請了專 利,后來也有不少類似的專利,但均因材質不過關而未能實現。直到 1964 年, 西德本特勒鋼鐵公司在 22T 鋼包上,采用滑動水口裝置代替塞棒系統進行澆 鋼,首次獲得成功,并迅速推廣到許多國家。 滑動水口一般由驅動裝置、機械部分和耐火材料部分(即上下滑板、下 水口)組成?;瑒铀诘墓ぷ髟硎峭ㄟ^滑動機構使上下滑板磚滑動,從而 帶動流鋼孔的開閉來調節鋼水流量大小的。 為獲得較長的使用壽命和穩定的操作條件,滑板作為滑動水口系統的耐 火材料和機械構件,都要求其具有優良的性能。當前,為了使滑動水口系統 使用性能更加穩定可靠,對滑板的形狀以及固定方式進行了許多改進和研究, 其主要目的是抑制滑板使用過程中工作面裂紋的產生和擴展。 滑板(Sliding Plate,簡稱 SP)是滑動水口系統的主要部件之一。按 照組成滑動水口系統的滑板塊數劃分,可分為兩層式和三層式。鋼包用滑板 一般為兩層式,操作時上滑板固定不動,通過下滑板進行截流和節流。中間 包用滑板一般為三層式,操作時將上滑板與上水口固定,下滑板與下水口固 定,通過中間滑板來進行截流和節流。 3.1 負載與運動分析 3.1.1 計算工作負載 由任務書給出 缸1:F1=100KN 缸2:F2=100KN 13 3.1.2 摩擦及慣性負載 由于摩擦及慣性負載須由實驗確定,且該系統的摩擦及慣性負載均 不大,故忽略不計。 3.1.3 工進速度 由任務書給出 缸1:V1=15mm/s 缸2:V2=15mm/s 3.1.4 各工況負載 由于忽略了摩擦及慣性負載,且由任務書可知,整個工作過程中, 工 3.1.5 各工況時間 將啟動和減速過程忽略 工進:t1=7.33s 退回:t2=7.33s 3.2 確定液壓缸基本參數 3.2.1 初選系統壓力 由任務書給出系統工作壓力 P1=16MPa,液壓缸工作過程中,活塞桿 主要受壓,故取 d/D=0.7 系統對活塞桿速度有要求,初步構想采用出口節流調速,故初取系 統背壓 P2=1MPa 3.2.2 計算液壓缸主要尺寸 A1= 14 去=0.9 =71.6846 = 則 A1=7168.46則液壓缸直徑 D=9.56cm 去標準值 D=100cm 由 d/D=0.7,則 A1=2A2,i=0.7 則 d=70mm 則液壓缸的有效面積: A1=/4=78.5 A2=( )=40.1 活塞桿直徑 A=A1-A2=38.4 3.3 擬定液壓系統圖 3.3.1 選擇基本回路 3.3.1.1 調速回路 由于出口節流調速始終存在背壓,故速度穩定性好。 3.3.1.2 油源形式的確定 由第一部分分析看出,系統工作過程中主要由工進(高壓大流量) 和退回(低壓大流量)兩個工況組成,即泵主要要滿足高壓大流量的 要求,故而,選擇軸向柱塞泵。 3.3.1.3卸荷回路的選擇 由于鋼水包滑動水口特殊的工作條件,要求液壓系統在大部分時間 內都處于不工作狀態,但頻繁的啟動不僅消耗大量能量,而且對液壓 系統不利,故而系統應采用卸荷回路,現提出以下卸荷回路: (1)換向閥卸荷 15 (2)先導式溢流閥卸荷 (3)先導式電磁卸荷溢流閥卸荷 3.3.1.4鎖止回路的確定 由于鋼水包滑動水口要求在任何位置停止并鎖緊,以穩定的調節鋼 水流出速率,故采用液控單向閥的鎖緊回路。 3.3.1.5系統圖的最終確定 (1) 16 (2) 3.1.3.6系統的比較 系統一采用雙缸串聯機構,工作中從動缸可隨主動缸動作,從動缸 的啟動與停止完全跟隨主動缸動作,運動控制精確,且系統簡單,易 實現。 17 系統二中,從動缸采用差動連接,并靠主動缸推動滑動水口為從動 缸提供機械力,使從動缸運動,在主動缸停止運動時,從動缸可能會 在慣性作用下繼續運動,從而造成滑動水口的開度定位不精確,且此 系統復雜,使系統搭建、調試以及發快的設計變得復雜。 系統三才有用先導式卸荷溢流閥,卸荷溢流閥流量大,且系統簡單。 系統四采用單缸系統,并利用換向閥中位鎖緊,系統簡單易實現,但 單缸系統的液壓缸尺寸計算時,須按有桿腔提供工作壓力計算,導致 液壓缸尺寸變大,而由于此液壓缸需要經常拆卸,過大的液壓缸對工 人操作不方便,且對機械機構要求也更高,而換向閥中位機能鎖緊回 路鎖緊不可靠。 綜合以上分析,將系統一作為最終選定系統。 3.4液壓輔件的選擇 3.4.1 選擇液壓泵及驅動電機 3.4.1.1確定液壓泵最大工作壓力 P1=16MPa 由于系統管路簡單,取 P=0.5MPa 3.4.1.2確定液壓泵的流量 18 取泄露系數 K=1.1 3.4.1.3選擇液壓泵型號 由以上計算數字查閱產品樣本,選用規格相近的華德公司的 A2F 10 R 2 P 1軸向柱塞泵 3.4.1.4確定驅動液壓泵的功率 取泵的總效率=0.8 其中=10ml/r 1500r/min=15l/min =5KW 3.4.2 控制閥的選擇 3.4.2.1 先導式溢流閥 溢流閥通過的最大流量即為泵的額定流量,q=15L/min,最大調定 壓力 p16MPa 選擇華德公司的 DBW 10A-2-30B/315X/V 3.4.2.2 換向閥 通過換向閥最大流量為系統工進時流量 q=7.065L/min,工作壓力 19 p=16MPa 系統電磁換向閥選擇4WE6 J 50B/ A G24 V 系統手動換向閥選擇 H-4WMM 6JB/V 3.4.2.3調速閥及液控單向閥 調速閥及液控單向閥的最大流量為系統工進工況時的流量 q=7.065L/min,工作壓力 p=16MPa 調速閥選擇 Z2F 6-30B/S2 V 單向閥選擇 Z2S 6-40 B/V 3.4.3 蓄能器的選擇 3.4.3.1蓄能器的參數計算 (1)蓄能器充氣壓力的確定 蓄能器的最低工作壓力應由實驗確定,但由于條件的限制,在此定 位12MPa。 則蓄能器的充氣壓力 (2)蓄能器總?cè)莘e V0的計算 由于蓄能器做應急能源使用,并要求在泵不工作時,靠蓄能器可工 作2-3次,以下按工作三次計算 則蓄能器有效工作容積 V=A1S3 其中取 =1.2 V=3.2L 20 工作過程可看做等溫過程 則 3.4.3.2蓄能器的選擇 有以上計算選擇力士樂公司的 HAB 20-262-2X/10 G09 2N111-SQLO- 皮囊式蓄能器 3.4.4管道的選擇 3.4.4.1 管道內徑的計算 管道內徑計算公式 d=1.13 吸油管路: 取 v=3m/s d=10.3mm 回油管路:取 v=3.5m/s d=9.5mm/s 壓油管路:取 v=8.5m/s d=6mm/s 3.4.4.2 管道的選擇 液壓泵至閥塊之間管道的選擇:由泵的 p 口螺紋尺寸為 M221.5, 選擇 M221.5的卡套式管接頭,據此選擇泵至閥塊之間的管道為外徑 18,內徑 12的鋼管。 閥塊至油箱之間管道的選擇:由回油管路的上述計算,取內徑 21 10mm,外徑 14mm 的鋼管,選擇 M181.5的卡套式管接頭。 閥塊上 A、B 口至液壓缸之間的管道選擇:由亞油管路計算,選擇 內徑 6mm,外徑 10mm 的鋼管,管接頭選擇 M141.5的卡套式管接 頭。 3.5 確定油箱容量 油箱容量由經驗公式確定:V=q q=15L/min,取 =6 即油箱容量 V=90L 3.6過濾系統的設計 3.6.1 過濾器的位置設置 系統采用軸向柱塞泵,受泵的吸油特性限制,不采用吸油過濾由系 統 要求知道,系統大部分時間處于卸荷狀態,故只采用壓油路過濾, 且過濾器裝在溢流閥的上游,既可起到對泵下游液壓元件的保護,又 可保證流回油箱油液的清潔。 3.6.2 過濾器精度的選擇 (1)系統中最敏感元件為液壓泵 (2)由 ISO4406標注及水乙二醇為工作介質,選擇清潔度為 17/15/13。 (3)考慮到系統工作的高溫環境,及系統的故障可能威脅設備及 人員安全,目標清潔度再增加一級,選擇16/14/12。 22 (4)由目標清潔度選擇過濾器清潔度,查表可得過濾精度為 5m。 3.6.3過濾器尺寸確定 (1)根據環境污染狀況和對污染物的控制程度,查處環境等級 由于鋼廠環境較差,但系統所用缸較少,故選環境等級為5級。 (2)確定流量增大倍數 選擇 ZU-H 系列高壓過濾器,最大允許壓力將為0.35MPa,據此查表 增大倍數為2倍 3.7液壓油的選用 由于鋼水包滑動水口液壓系統在鋼水包附近工作,工作環境溫度較 高,且有發生火災的危險,故采用抗燃液壓油水乙二醇。 23 結論 經過對鋼包設計計算,可以得出以下結論: (1)設計了鋼包體結構; (2)設計了鋼包滑動水口; (3)設計了鋼包滑動水口液壓系統。 通過本次畢業設計,我全面的進行了一次機械設計基本技能訓練,對所學 的課程進行了一次全面系統的復習,并融會貫通。綜合運用所學知識,遇到問 題,分析問題,并解決問題。經過這次畢業設計,我的計算機和外語應用能力 得到了一定的提高,并且提高了我的機械設計與應用能力。 不過在本次設計計算過程也有不少問題,比如查閱的資料可能還不夠完善, 考慮的工況還不夠周全。計算時我也遇到了許多困難,但是通過自己不斷查閱 相關資料和請教老師等途徑,最終將一個個困難解決了。在本次設計過程中鍛 煉和加強了自己獨立分析、解決問題的能力。這些必將使我在以后的生活與學 習中受益匪淺。 24 致謝 本次畢業設計是在 xx 老師的親切關懷和悉心指導下完成的。xx 嚴肅的科 學態度,嚴謹?shù)闹螌W(xué)精神,精益求精的工作作風,深深地感染和激勵著我。從 課題的選擇到項目的最終完成,xx 老師都始終給予我細心的指導和不懈的支持。 xx 老師不僅在學業上給我以精心指導,同時還在思想給我以鼓舞,在此謹向 xx 老師致以誠摯的謝意和崇高的敬意。 最后再一次感謝所有在畢業設計中曾經幫助過我的良師益友和同學,以及 在設計中被我引用或參考的論著的作者。 25 參考文獻 1閻松葉,鋼包回轉臺回轉支承緊固J,中鋼邢機設備制造公司連鑄室, 2010(13),7677 2潘毓淳編. 煉鋼設備M. 北京:冶金工業出版社,1991 3邱慶文,鋼包回轉臺改造J,漣源鋼鐵集團有限公司,2005,33(3) , 3742 4成大先編,機械設計手冊第四版(第二卷)M.北京:化學工業出版社,2002 5羅振才編,煉鋼機械,第 2 版M.北京:冶金工業出版社,2008 6成大先編,機械設計手冊第四版(第三卷)M.北京:化學工業出版社,2002 7徐立民編,回轉支承M. 北京:高等教育出版社,1988 8羅振才編,煉鋼設備M. 北京:冶金工業出版社,1982 9北京鋼鐵學院,弧形連續鑄鋼設備M.北京:冶金工業出版社,1978 10濮良貴編 .紀名剛.機械設計(第八版)M.北京:高等教育出版社,2006 11吳宗澤,羅圣國編 .機械設計課程設計手冊(2 版)M.北京,高等教育出版 社,1999 12成大先編,機械設計手冊第四版(第四卷)M.北京:化學工業出版社, 2002 13減速器實用技術手冊編委會編.減速器實用技術手冊M.北京:機械工業出 版社,1992 14樊延安,鋼包回轉臺四軸減速器高速錐齒輪失效分析J,湘潭鋼鐵公司, 1997.9,第 5 期,1520 15 謝寶輝, 畢銘強, 蝶式鋼包回轉臺和四連桿式鋼包回轉臺對比分析J,大連 重工起重集團有限公司設計研究院,2010,27(3) ,1720 16 唐中銀,杜元雙,鋼包回轉臺回轉軸承連接螺栓的緊固J, 中國第十八冶 金建設公司機電公司,2005.3,142(3),2226 17卜炎編.螺紋聯結設計與計算M.北京:高等教育出版社,1993 18百度文庫 .軸承摩擦系數A ,專業文獻/行業資料,機械制造,15 19洛陽礦山機械研究所等.國際齒輪裝置與傳動會議論文集A.北京:機械工業 出版社,1977 20齒輪手冊編委會編 .齒輪手冊M.北京:機械工業出版社,1990 DOI 10.1007/s00170-004-2328-8 ORIGINAL ARTICLE Int J Adv Manuf Technol (2006) 28: 6166 Fang-Jung Shiou Chao-Chang A. Chen Wen-Tu Li Automated surface finishing of plastic injection mold steel with spherical grinding and ball burnishing processes Received: 30 March 2004 / Accepted: 5 July 2004 / Published online: 30 March 2005 Springer-Verlag London Limited 2005 Abstract This study investigates the possibilities of automated spherical grinding and ball burnishing surface finishing pro- cesses in a freeform surface plastic injection mold steel PDS5 on a CNC machining center. The design and manufacture of a grinding tool holder has been accomplished in this study. The optimal surface grinding parameters were determined using Taguchis orthogonal array method for plastic injection molding steel PDS5 on a machining center. The optimal surface grind- ing parameters for the plastic injection mold steel PDS5 were the combination of an abrasive material of PA Al 2 O 3 , a grind- ing speed of 18 000 rpm, a grinding depth of 20 m, and a feed of 50 mm/min. The surface roughness R a of the specimen can be improved from about 1.60 mto0.35 m by using the optimal parameters for surface grinding. Surface roughness R a can be further improved from about 0.343 mto0.06 mbyusingthe ball burnishing process with the optimal burnishing parameters. Applying the optimal surface grinding and burnishing parame- ters sequentially to a fine-milled freeform surface mold insert, the surface roughness R a of freeform surface region on the tested part can be improved from about 2.15 mto0.07 m. Keywords Automated surface finishing Ball burnishing process Grinding process Surface roughness Taguchis method 1 Introduction Plastics are important engineering materials due to their specific characteristics, such as corrosion resistance, resistance to chemi- cals, low density, and ease of manufacture, and have increasingly F.-J. Shiou (a117) C.-C.A. Chen W.-T. Li Department of Mechanical Engineering, National Taiwan University of Science and Technology, No. 43, Section 4, Keelung Road, 106 Taipei, Taiwan R.O.C. E-mail: shioumail.ntust.edu.tw Tel.: +88-62-2737-6543 Fax: +88-62-2737-6460 replaced metallic components in industrial applications. Injec- tion molding is one of the important forming processes for plas- tic products. The surface finish quality of the plastic injection mold is an essential requirement due to its direct effects on the appearance of the plastic product. Finishing processes such as grinding, polishing and lapping are commonly used to improve the surface finish. The mounted grinding tools (wheels) have been widely used in conventional mold and die finishing industries. The geometric model of mounted grinding tools for automated surface finish- ing processes was introduced in 1. A finishing process model of spherical grinding tools for automated surface finishing sys- tems was developed in 2. Grinding speed, depth of cut, feed rate, and wheel properties such as abrasive material and abrasive grain size, are the dominant parameters for the spherical grind- ing process, as shown in Fig. 1. The optimal spherical grinding parameters for the injection mold steel have not yet been investi- gated based in the literature. In recent years, some research has been carried out in de- termining the optimal parameters of the ball burnishing pro- cess (Fig. 2). For instance, it has been found that plastic de- formation on the workpiece surface can be reduced by using a tungsten carbide ball or a roller, thus improving the surface roughness, surface hardness, and fatigue resistance 36. The burnishing process is accomplished by machining centers 3, 4 and lathes 5, 6. The main burnishing parameters having signifi- cant effects on the surface roughness are ball or roller material, burnishing force, feed rate, burnishing speed, lubrication, and number of burnishing passes, among others 3. The optimal sur- face burnishing parameters for the plastic injection mold steel PDS5 were a combination of grease lubricant, the tungsten car- bide ball, a burnishing speed of 200 mm/min, a burnishing force of 300 N, and a feed of 40 m 7. The depth of penetration of the burnished surface using the optimal ball burnishing parameters was about 2.5 microns. The improvement of the surface rough- ness through burnishing process generally ranged between 40% and 90% 37. The aim of this study was to develop spherical grinding and ball burnishing surface finish processes of a freeform surface 62 plastic injection mold on a machining center. The flowchart of automated surface finish using spherical grinding and ball bur- nishing processes is shown in Fig. 3. We began by designing and manufacturing the spherical grinding tool and its alignment de- vice for use on a machining center. The optimal surface spherical grinding parameters were determined by utilizing a Taguchis orthogonal array method. Four factors and three corresponding levels were then chosen for the Taguchis L 18 matrix experiment. The optimal mounted spherical grinding parameters for surface grinding were then applied to the surface finish of a freeform surface carrier. To improve the surface roughness, the ground surface was further burnished, using the optimal ball burnishing parameters. Fig. 1. Schematic diagram of the spherical grinding process Fig. 2. Schematic diagram of the ball-burnishing process Fig. 3. Flowchart of automated surface finish using spherical grinding and ball burnishing processes 2 Design of the spherical grinding tool and its alignment device To carry out the possible spherical grinding process of a freeform surface, the center of the ball grinder should coincide with the z-axis of the machining center. The mounted spherical grinding tool and its adjustment device was designed, as shown in Fig. 4. The electric grinder was mounted in a tool holder with two ad- justable pivot screws. The center of the grinder ball was well aligned with the help of the conic groove of the alignment com- ponents. Having aligned the grinder ball, two adjustable pivot screws were tightened; after which, the alignment components could be removed. The deviation between the center coordi- nates of the ball grinder and that of the shank was about 5 m, which was measured by a CNC coordinate measuring machine. The force induced by the vibration of the machine bed is ab- sorbed by a helical spring. The manufactured spherical grind- ing tool and ball-burnishing tool were mounted, as shown in Fig. 5. The spindle was locked for both the spherical grinding process and the ball burnishing process by a spindle-locking mechanism. 63 Fig. 4. Schematic illustration of the spherical grinding tool and its adjust- ment device 3 Planning of the matrix experiment 3.1 Configuration of Taguchis orthogonal array The effects of several parameters can be determined efficiently by conducting matrix experiments using Taguchis orthogonal array 8. To match the aforementioned spherical grinding pa- rameters, the abrasive material of the grinder ball (with the diam- eter of 10 mm), the feed rate, the depth of grinding, and the revolution of the electric grinder were selected as the four experi- mental factors (parameters) and designated as factor A to D (see Table 1) in this research. Three levels (settings) for each factor were configured to cover the range of interest, and were identi- Fig. 5. a Photo of the spherical grinding tool b Photo of the ball burnishing tool Table 1. The experimental factors and their levels Factor Level 123 A. Abrasive material SiC Al 2 O 3 ,WA Al 2 O 3 ,PA B. Feed (mm/min) 50 100 200 C. Depth of grinding (m) 20 50 80 D. Revolution (rpm) 12 000 18 000 24 000 fied by the digits 1, 2, and 3. Three types of abrasive materials, namely silicon carbide (SiC), white aluminum oxide (Al 2 O 3 , WA), and pink aluminum oxide (Al 2 O 3 , PA), were selected and studied. Three numerical values of each factor were determined based on the pre-study results. The L 18 orthogonal array was se- lected to conduct the matrix experiment for four 3-level factors of the spherical grinding process. 3.2 Definition of the data analysis Engineering design problems can be divided into smaller-the- better types, nominal-the-best types, larger-the-better types, signed-target types, among others 8. The signal-to-noise (S/N) ratio is used as the objective function for optimizing a product or process design. The surface roughness value of the ground sur- face via an adequate combination of grinding parameters should be smaller than that of the original surface. Consequently, the spherical grinding process is an example of a smaller-the-better type problem. The S/N ratio, , is defined by the following equation 8: =10 log 10 (mean square quality characteristic) =10 log 10 bracketleftBigg 1 n n summationdisplay i=1 y 2 i bracketrightBigg . (1) where: y i : observations of the quality characteristic under different noise conditions n: number of experiment After the S/N ratio from the experimental data of each L 18 orthogonal array is calculated, the main effect of each factor was determined by using an analysis of variance (ANOVA) tech- nique and an F-ratio test 8. The optimization strategy of the 64 smaller-the better problem is to maximize ,asdefinedbyEq.1. Levels that maximize will be selected for the factors that have a significant effect on . The optimal conditions for spherical grinding can then be determined. 4 Experimental work and results The material used in this study was PDS5 tool steel (equiva- lent to AISI P20) 9, which is commonly used for the molds of large plastic injection products in the field of automobile com- ponents and domestic appliances. The hardness of this material is about HRC33 (HS46) 9. One specific advantage of this ma- terial is that after machining, the mold can be directly used for further finishing processes without heat treatment due to its special pre-treatment. The specimens were designed and manu- factured so that they could be mounted on a dynamometer to measure the reaction force. The PDS5 specimen was roughly ma- chined and then mounted on the dynamometer to carry out the fine milling on a three-axis machining center made by Yang- Iron Company (type MV-3A), equipped with a FUNUC Com- pany NC-controller (type 0M) 10. The pre-machined surface roughness was measured, using Hommelwerke T4000 equip- ment, to be about 1.6 m. Figure 6 shows the experimental set-up of the spherical grinding process. A MP10 touch-trigger probe made by the Renishaw Company was also integrated with the machining center tool magazine to measure and determine the coordinated origin of the specimen to be ground. The NC codes needed for the ball-burnishing path were generated by PowerMILL CAM software. These codes can be transmitted to the CNC controller of the machining center via RS232 serial interface. Table 2 summarizes the measured ground surface roughness value R a and the calculated S/N ratio of each L 18 orthogonal ar- ray using Eq. 1, after having executed the 18 matrix experiments. The average S/N ratio for each level of the four factors can be obtained, as listed in Table 3, by taking the numerical values pro- vided in Table 2. The average S/N ratio for each level of the four factors is shown graphically in Fig. 7. Fig. 6. Experimental set-up to determine the op- timal spherical grinding parameters Table 2. Ground surface roughness of PDS5 specimen Exp. Inner array Measured surface Response no. (control factors) roughness value (R a ) ABCD y 1 y 2 y 3 S/N ratio Mean (m) (m) (m) (dB) y (m) 1 1 1 1 1 0.35 0.35 0.35 9.119 0.350 2 1 2 2 2 0.37 0.36 0.38 8.634 0.370 3 1 3 3 3 0.41 0.44 0.40 7.597 0.417 4 2 1 2 3 0.63 0.65 0.64 3.876 0.640 5 2 2 3 1 0.73 0.77 0.78 2.380 0.760 6 2 3 1 2 0.45 0.42 0.39 7.520 0.420 7 3 1 3 2 0.34 0.31 0.32 9.801 0.323 8 3 2 1 3 0.27 0.25 0.28 11.471 0.267 9 3 3 2 1 0.32 0.32 0.32 9.897 0.320 10 1 1 2 2 0.35 0.39 0.40 8.390 0.380 11 1 2 3 3 0.41 0.50 0.43 6.968 0.447 12 1 3 1 1 0.40 0.39 0.42 7.883 0.403 13 2 1 1 3 0.33 0.34 0.31 9.712 0.327 14 2 2 2 1 0.48 0.50 0.47 6.312 0.483 15 2 3 3 2 0.57 0.61 0.53 4.868 0.570 16 3 1 3 1 0.59 0.55 0.54 5.030 0.560 17 3 2 1 2 0.36 0.36 0.35 8.954 0.357 18 3 3 2 3 0.57 0.53 0.53 5.293 0.543 Table 3. Average S/N ratios by factor levels (dB) Factor A B C D Level 1 8.099 7.655 9.110 6.770 Level 2 5.778 7.453 7.067 8.028 Level 3 8.408 7.176 6.107 7.486 Effect 2.630 0.479 3.003 1.258 Rank2413 Mean 7.428 The goal in the spherical grinding process is to minimize the surface roughness value of the ground specimen by determin- ing the optimal level of each factor. Since log is a monotone decreasing function, we should maximize the S/N ratio. Conse- quently, we can determine the optimal level for each factor as being the level that has the highest value of . Therefore, based 65 Fig. 7. Plots of control factor effects on the matrix experiment, the optimal abrasive material was pink aluminum oxide; the optimal feed was 50 mm/min; the optimal depth of grinding was 20 m; and the optimal revolution was 18 000 rpm, as shown in Table 4. The main effect of each factor was further determined by using an analysis of variance (ANOVA) technique and an F ratio test in order to determine their significance (see Table 5). The F 0.10,2,13 is 2.76 for a level of significance equal to 0.10 (or 90% confidence level); the factors degree of freedom is 2 and the degree of freedom for the pooled error is 13, according to F-distribution table 11. An F ratio value greater than 2.76 can be concluded as having a significant effect on surface roughness and is identified by an asterisk. As a result, the feed and the depth of grinding have a significant effect on surface roughness. Five verification experiments were carried out to observe the repeatability of using the optimal combination of grinding pa- rameters, as shown in Table 6. The obtainable surface roughness value R a of such specimen was measured to be about 0.35 m. Surface roughness was improved by about 78% in using the op- Table 4. Optimal combination of spherical grinding parameters Factor Level Abrasive Al 2 O 3 ,PA Feed 50 mm/min Depth of grinding 20 m Revolution 18 000 rpm Table 5. ANOVA table for S/N ratio of surface roughness Factor Degrees Sum Mean F ratio of freedom of squares squares A 2 24.791 12.396 3.620 B 2 0.692 0.346 C 2 28.218 14.109 4.121 D 2 4.776 2.388 Error 9 39.043 Total 17 97.520 Pooled to error 13 44.511 3.424 F ratio value 2.76 has significant effect on surface roughness Table 6. Surface roughness value of the tested specimen after verification experiment Exp. no. Measured value R a (m) Mean y (m) S/N ratio y 1 y 2 y 3 1 0.30 0.31 0.33 0.313 10.073 2 0.36 0.37 0.36 0.363 8.802 3 0.36 0.37 0.37 0.367 8.714 4 0.35 0.37 0.34 0.353 9.031 5 0.33 0.36 0.35 0.347 9.163 Mean 0.349 9.163 timal combination of spherical grinding parameters. The ground surface was further burnished using the optimal ball burnishing parameters. A surface roughness value of R a = 0.06 m was ob- tainable after ball burnishing. Improvement of the burnished sur- face roughness observed with a 30 optical microscope is shown in Fig. 8. The improvement of pre-machined surfaces roughness was about 95% after the burnishing process. The optimal parameters for surface spherical grinding ob- tained from the Taguchis matrix experiments were applied to the surface finish of the freeform surface mold insert to evalu- ate the surface roughness improvement. A perfume bottle was selected as the tested carrier. The CNC machining of the mold in- sert for the tested object was simulated with PowerMILL CAM software. After fine milling, the mold insert was further ground with the optimal spherical grinding parameters obtained from the Taguchis matrix experiment. Shortly afterwards, the ground surface was burnished with the optimal ball burnishing parame- ters to further improve the surface roughness of the tested object (see Fig. 9). The surface roughness of the mold insert was meas- ured with Hommelwerke T4000 equipment. The average surface roughness value R a on a fine-milled surface of the mold insert was 2.15 m on average; that on the ground surface was 0.45 m Fig. 8. Comparison between the pre-machined surface, ground surface and the burnished surface of the tested specimen observed with a toolmaker microscope (30) 66 Fig. 9. Fine-milled, ground and burnished mold insert of a perfume bottle on average; and that on burnished surface was 0.07 monaver- age. The surface roughness improvement of the tested object on ground surface was about (2.150.45)/2.15 = 79.1%, and that on the burnished surface was about (2.150.07)/2.15 = 96.7%. 5 Conclusion In this work, the optimal parameters of automated spheri- cal grinding and ball-burnishing surface finishing processes in a freeform surface plastic injection mold were developed suc- cessfully on a machining center. The mounted spherical grinding tool (and its alignment components) was designed and manu- factured. The optimal spherical grinding parameters for surface grinding were determined by conducting a Taguchi L 18 matrix experiments. The optimal spherical grinding parameters for the plastic injection mold steel PDS5 were the combination of the abrasive material of pink aluminum oxide (Al 2 O 3 ,PA),afeed of 50 mm/min, a depth of grinding 20 m, and a revolution of 18 000 rpm. The surface roughness R a of the specimen can be improved from about 1.6 mto0.35 m by using the optimal spherical grinding conditions for surface grinding. By applying the optimal surface grinding and burnishing parameters to the surface finish of the freeform surface mold insert, the surface roughness improvements were measured to be ground surface was about 79.1% in terms of ground surfaces, and about 96.7% in terms of burnished surfaces. Acknowledgement The authors are grateful to the National Science Coun- cil of the Republic of China for supporting this research with grant NSC 89-2212-E-011-059. References 1. Chen CCA, Yan WS (2000) Geometric model of mounted grinding tools for automated surface finishing processes. In: Proceedings of the 6th International Conference on Automation Technology, Taipei, May 911, pp 4347 2. Chen CCA, Duffie NA, Liu WC (1997) A finishing model of spherical grinding tools for automated surface finishing systems. Int J Manuf Sci Prod 1(1):1726 3. Loh NH, Tam SC (1988) Effects of ball burnishing parameters on surface finisha literature survey and discussion. Precis Eng 10(4):215 220 4. Loh NH, Tam SC, Miyazawa S (1991) Investigations on the sur- face roughness produced by ball burnishing. Int J Mach Tools Manuf 31(1):7581 5. Yu X, Wang L (1999) Effect of various parameters on the surface roughness of an aluminum alloy burnished with a spherical surfaced polycrystalline diamond tool. Int J Mach Tools Manuf 39:459469 6. Klocke F, Liermann J (1996) Roller burnishing of hard turned surfaces. Int J Mach Tools Manuf 38(5):419423 7. Shiou FJ, Chen CH (2003) Determination of optimal ball-burnishing parameters for plastic injection molding steel. Int J Adv Manuf Technol 3:177185 8. Phadke MS (1989) Quality engineering using robust design. Prentice- Hall, Englewood Cliffs, New Jersey 9. Ta-Tung Company (1985) Technical handbook for the selection of plas- tic injection mold steel. Taiwan 10. Yang Iron Works (1996) Technical handbook of MV-3A vertical ma- chining center. Taiwan 11. Montgomery DC (1991) Design and analysis of experiments. Wiley, New York
收藏