《C語言 賓館客房管理系統!!!》由會員分享，可在線閱讀，更多相關《C語言 賓館客房管理系統!!!（15頁珍藏版）》請在裝配圖網上搜索。
1、C語言 賓館客房管理系統!!!
? 賓館客房管理系統
賓館的客房銷售是賓館的主要利潤來源。要求針對客房的屬性，如房號、房價(只要分為三個檔次價格即可)、入住情況、維護狀況進行分析編程，要求實現若干功能，如：能夠隨時地通過程序查看每間客房的狀態，查訊各種價位的空房數量和具體房號、查訊各種價位客房的入住數量和房號，當前正在維修的所有客房房號，隨時統計當月的銷售總收入，在文件中記錄每個房間入住和退房情況及單價、毛利收入，根據上個月的文件記錄，次月可以統計上個月的銷售總收入等等。
該管理系統運行時是一個循環式的菜單選項，能依據選項選擇各種功能。并能依據需求，將結果打印在屏幕或打印到文件中。
2、
#include
#include
#include
//***********************************************************************************
void initial_room(); //初始化80個房間信息
void welcome(); //驗證用戶登陸,登陸成功顯示歡迎信息
void enter();
void book_room();
void check_in();
3、
void check_out();
void inquire();
int i=0;
//***********************************************************************************
struct Room
{
int number;
int dank;
int price;
int state;
};
struct Customer
{
char name[10],ID[19];
int room_number;
int prepaid;
int ch
4、ange;
int day;
};
void set_name(struct Customer *cs, char *n)
{
strcpy(cs->name,n);
}
void set_ID(struct Customer *cs, char *p)
{
strcpy(cs->ID,p);
}
void set_room_number(struct Customer *cs, int n)
{
cs->room_number=n;
}
void set_day(struct Customer *cs, int d)
{
cs->day=d;
5、
}
void set_prepaid(struct Customer *cs, int p)
{
cs->prepaid=p;
}
char *get_name(struct Customer *cs)
{
return cs->name;
}
char *get_ID(struct Customer *cs)
{
return cs->ID;
}
int get_room_number(struct Customer *cs)
{
return cs->room_number;
}
int get_day(struct Customer *c
6、s)
{
return cs->day;
}
int get_prepaid(struct Customer *cs)
{
return cs->prepaid;
}
//***********************************************************************************
struct Room room[80];
struct Customer *customer[80];
void CCustomer(struct Customer *cs)
{
printf("請您輸入顧客的姓名\
7、n");
scanf("%s",&cs->name);
printf("請您輸入顧客的身份證號碼\n");
scanf("%s",&cs->ID);
cs->prepaid = cs->change = cs->day = 0;
}
void FCustomer()
{
printf("該顧客退房成功!");
}
int main(void) //程序入口從這里開始運行
{
char choice='1';
initial_room(); //初始化80個房間的信息,分四個等級
welcome(); //驗證用戶登陸,登陸成功顯示歡
8、迎信息
while(choice=='1')
{
enter(); //根據用戶的選擇執行不同的功能
printf("\n");
printf("繼續使用本系統請按\"1\",退出請按\"2\"! ");
fflush(stdin);
scanf("%c",&choice);
printf("\n");
}
return 0;
}
//系統登陸界面***********************************************************************
void welcome() /
9、/驗證用戶登陸,登陸成功顯示歡迎信息
{
char name[4],code[7];
printf("請輸入用戶名和密碼(以空格隔開):\n");
scanf("%s%s",&name,&code);
while((strcmp(name,"000")!=0)||(strcmp(code,"666666")!=0))
{
printf("用戶名或密碼輸入有誤,請重新輸入!\n");
scanf("%s%s",&name,&code);
}
printf("\n");
printf("\n");
printf("
10、 ▲***************************▲\n");
printf(" △ 歡迎使用賓館客房管理系統! △\n");
printf(" ▲***************************▲\n");
printf("\n");
}
//系統入口***************************************************************************
void enter()
{
int kind_of_ser
11、vice;
printf("請選擇服務類別:訂房、入住、退房還是查詢? \n");
printf(" 1->定房 2->入住 3->退房 4->查詢: ");
scanf("%d",&kind_of_service);
if((kind_of_service>4) || (kind_of_service<1))
{
printf("您的輸入有誤，請重試!\n");
scanf("%d",&kind_of_service);
}
else
{
switch(kind_of_service)
{
case 1: book
12、_room();
break;
case 2: check_in();
break;
case 3: check_out();
break;
case 4: inquire();
break;
}
}
}
//訂房實現***************************************************************************
void book_room()
{
int room_standard,day;
customer[i] = (struct Customer*
13、)malloc(sizeof(struct Customer));
CCustomer(customer[i]);
printf("請您選擇預定房間的標準:\n");
printf("1.單人間/天150元\n2.雙人間/天200元\n3.標準間/天300元\n4.總統套房/天600元\n");
scanf("%d",&room_standard);
printf("請輸入預定天數\n");
scanf("%d",&day);
set_day(customer[i],day);
switch(room_standard)
{
int n;
14、
case 1:
printf("住房費用總共為: %d 元\n",day*150); //計算住房費用
for(n=0;n<20;n++) //從第一個級別的房間中查找一個空閑的房間
{
if(room[n].state==0) //state=0表示該住房沒有被預定的
{
printf("預定成功★房間號碼為: %d\n",room[n].number);
room[n].state=1;
set_room_number(customer[i],room[n].number);
b
15、reak;
}
}
break;
case 2:
printf("住房費用總共為: %d 元\n",day*200);
for(n=20;n<40;n++)
{
if(room[n].state==0)
{
printf("預定成功★房間號碼為: %d\n",room[n].number);
room[n].state=1;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
case 3:
16、 printf("住房費用總共為: %d 元\n",day*300);
for(n=40;n<60;n++)
{
if(room[n].state==0)
{
printf("預定成功★房間號碼為: %d\n",room[n].number);
room[n].state=1;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
case 4:
printf("住房費用總共為: %d 元\n",day*600);
17、 for(n=60;n<80;n++)
{
if(room[n].state==0)
{
printf("預定成功★房間號碼為: %d\n",room[n].number);
room[n].state=1;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
}
i++; //住房的顧客數加1
}
//入住登記****************************************************
18、***********************
void check_in()
{
char name1[10],id1[19];
int ding_or_no,prepaid;
int j;
printf("該顧客訂房了嗎? (1->訂了 2->沒訂) ");
scanf("%d",&ding_or_no);
if(ding_or_no==1)
{
printf("請輸入顧客的姓名:\n");
scanf("%s",&name1);
printf("請輸入顧客的身份證號碼:\n");
scanf("%s",&id1);
19、for(j=0;j
20、customer[j])*150;
set_prepaid(customer[j],prepaid);
printf("請收房費 %d元整!\n",prepaid); //開始收費
room[num%100-1].state=2; //修改房間狀態為入住狀態
break;
case 7:
prepaid=get_day(customer[j])*200;
set_prepaid(customer[j],prepaid);
printf("請收房費 %d元整!\n",p
21、repaid);
room[19+num%100].state=2;
break;
case 8:
prepaid=get_day(customer[j])*300;
set_prepaid(customer[j],prepaid);
printf("請收房費 %d元整!\n",prepaid);
room[39+num%100].state=2;
break;
case 9:
prepaid=get_day(customer[j])*600;
set_prepaid
22、(customer[j],prepaid);
printf("請收房費 %d元整!\n",prepaid);
room[59+num%100].state=2;
break;
}
break;
}
}
}
else
{
int room_standard,day;
customer[i] = (struct Customer*)malloc(sizeof(struct Customer));
CCustomer(customer[i]);
printf("請您選擇預定房間的標準:\n"
23、);
printf("1.單人間/天150元\n2.雙人間/天200元\n3.標準間/天300元\n4.總統套房/天600元\n");
scanf("%d",&room_standard);
printf("請輸入住宿天數\n");
scanf("%d",&day);
set_day(customer[i],day);
switch(room_standard)
{
int n;
case 1:
prepaid=day*150;
set_prepaid(customer[i],prepaid);
pr
24、intf("請收房費 %d元整!\n",prepaid);
for(n=0;n<20;n++)
{
if(room[n].state==0)
{
printf("入住房間號碼為: %d\n",room[n].number);
room[n].state=2;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
case 2:
prepaid=day*200;
set_prepaid(cu
25、stomer[i],prepaid);
printf("請收房費 %d元整!\n",prepaid);
for(n=20;n<40;n++)
{
if(room[n].state==0)
{
printf("入住房間號碼為: %d\n",room[n].number);
room[n].state=2;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
case 3:
prepaid=d
26、ay*300;
set_prepaid(customer[i],prepaid);
printf("請收房費 %d元整!\n",prepaid);
for(n=40;n<60;n++)
{
if(room[n].state==0)
{
printf("入住房間號碼為: %d\n",room[n].number);
room[n].state=2;
set_room_number(customer[i],room[n].number);
break;
}
}
break;
27、
case 4:
prepaid=day*600;
set_prepaid(customer[i],prepaid);
printf("請收房費 %d元整!\n",prepaid);
for(n=60;n<80;n++)
{
if(room[n].state==0)
{
printf("入住房間號碼為: %d\n",room[n].number);
room[n].state=2;
set_room_number(customer[i],room[n].number);
brea
28、k;
}
}
break;
}
i++;
}
}
//退房結算***************************************************************************
void check_out()
{
char name2[10],id2[19];
int standard,j,room_number,day1,day2,day;
printf("請輸入要退房的顧客姓名和身份證號碼:\n");
scanf("%s%s",&name2,&id2);
printf(
29、"請輸入該顧客實住天數:\n");
scanf("%d",&day2);
for(j=0;j
30、
switch(standard)
{
case 6:
printf("顧客的房間號是%d :為單人間,每天150元\n",room_number);
printf("該顧客預付了房費 %d元, 實際消費 %d元整!\n",get_prepaid(customer[j]),day2*150);
printf("\n");
if(day>0)
printf("請退給該顧客 %d 元整!\n",day*150);
if(day<0)
printf("請補收該顧客住房費 %d 元整!\n",-d
31、ay*150);
break;
case 7:
printf("顧客的房間號是%d :為單人間,每天200元\n",room_number);
printf("該顧客預付了房費 %d元, 實際消費 %d元整!\n",get_prepaid(customer[j]),day2*200);
printf("\n");
if(day>0)
printf("請退給該顧客 %d 元整!\n",day*200);
if(day<0)
printf("請補收該顧客住房費 %d 元整!\n",-day*200);
32、
break;
case 8:
printf("顧客的房間號是%d :為單人間,每天300元\n",room_number);
printf("該顧客預付了房費 %d元, 實際消費 %d元整!\n",get_prepaid(customer[j]),day2*300);
printf("\n");
if(day>0)
printf("請退給該顧客 %d 元整!\n",day*300);
if(day<0)
printf("請補收該顧客住房費 %d 元整!\n",-day*300);
brea
33、k;
case 9:
printf("顧客的房間號是%d :為單人間,每天600元\n",room_number);
printf("該顧客預付了房費 %d元, 實際消費 %d元整!\n",get_prepaid(customer[j]),day2*600);
printf("\n");
if(day>0)
printf("請退給該顧客 %d 元整!\n",day*600);
if(day<0)
printf("請補收該顧客住房費 %d 元整!\n",-day*600);
break;
}
34、
printf("\n");
printf("退房核算清楚,請按1: ");
fflush(stdin);
scanf("%c",&account);
if(account=='1')
{
int k;
for(k=0;k<80;k++)
{
if(room[k].number==get_room_number(customer[j]))
room[k].state=0;
}
i--;
for(;j
35、er[j]=customer[j+1];
}
free(customer[i]);
FCustomer();
}
}
}
}
//信息查詢***************************************************************************
void inquire()
{
char inquire_choice;
printf("房間信息查詢請按1, 顧客信息查詢請按2: ");
fflush(stdin);
scanf("%c",&inquire_choice);
36、
if(inquire_choice=='1')
{
int j,k=0;
printf("\n");
printf("下列房間還沒人預訂，也沒人入?。篭n");
for(j=0;j<80;j++)
{
if(room[j].state==0)
{
if(k%10==0)
printf("\n");
printf("%d\t",room[j].number);
k++;
}
}
printf("\n");
printf("\n");
k=0;
printf("下列
37、房間已預訂：\n");
for(j=0;j<80;j++)
{
if(room[j].state==1)
{
if(k%10==0)
printf("\n");
printf("%d\t",room[j].number);
k++;
}
}
k=0;
printf("\n");
printf("\n");
printf("下列房間有人入?。篭n");
for(j=0;j<80;j++)
{
if(room[j].state==2)
{
if(k%10
38、==0)
printf("\n");
printf("%d\t",room[j].number);
k++;
}
}
printf("\n");
printf("\n");
}
else if(inquire_choice=='2')
{
char inquire_choice;
int j;
printf("按姓名查詢請按1, 按身份證查詢請按2: \n");
fflush(stdin);
scanf("%c",&inquire_choice);
if(inquire_choice=
39、='1')
{
char name3[10];
printf("請輸入顧客的姓名: \n");
scanf("%s",&name3);
for(j=0;j
40、(customer[j]));
}
}
}
if(inquire_choice=='2')
{
char id3[10];
int j;
printf("請輸入顧客的身份證: \n");
scanf("%s",&id3);
for(j=0;j
41、%d\n",get_room_number(customer[j]));
printf("\t預付房費為: %d\n",get_prepaid(customer[j]));
}
}
}
}
}
//房間信息初始化*********************************************************************
void initial_room() //對80個房間進行初始化,分4個等級
{
int j,k=601;
for(j=0;j<20;j++)
{
room[j].numbe
42、r=k++;
room[j].dank=1;
room[j].price=150;
room[j].state=0;
}
k=701;
for(j=20;j<40;j++)
{
room[j].number=k++;
room[j].dank=2;
room[j].price=200;
room[j].state=0;
}
k=801;
for(j=40;j<60;j++)
{
room[j].number=k++;
room[j].dank=3;
room[j].price=300;
room[j].state=0;
}
k=901;
for(j=60;j<80;j++)
{
room[j].number=k++;
room[j].dank=4;
room[j].price=600;
room[j].state=0;
}
}
分享給你的朋友吧：
i貼吧
新浪微博
騰訊微博
QQ空間
人人網
豆瓣
MSN
對我有幫助
1回答時間：2011-1-12 17:11 | 我來評論 | 檢舉
C語言 賓館客房管理系統!!!
