購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。?!咀ⅰ浚篸wg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
Abstract
Along with the unceasing development of weaving trade, automation in the application in weaving trade is more and more extensive, " pin plate "(is used in put the needle) is a important parts in weaving trade of realization automation. It's processing is special, it is higher that precision is asked, and need to have the processing of special machine tool, this is me the graduated design program of this time: ZXH54 model milling groove machine design — pillar parts design.
ZXH54 model milling groove machine is used in processing weaving trade in " pin plate " use privately cut machine tool, belong to the modular machine tool, this machine tool have 4 works position and 8 milling heads, can at the same time process 8 workpieces, have higher processing efficiency and processing precision, and can at the same time still realize needle groove and circular arc groove same work position, it surmounted the shortcoming of that machining process complex, processing efficiency low and process precision do not be in height of the processing of pin plate beforetime, so it have better application prospect.
This design divide into 4 in all: the first part is the general state of machine tool; second part with the whole design of ZXH54 model milling groove machine; the part of 3rd is the design of milling groove machine pillar parts; conclusion and look ahead is the partial of 4th. In which, the design of the part of 3rd is the focal point of the design, design from mechanical parts design, hydraulic parts design, hydraulic systematic autocontrol design 3 aspects for ZXH54 model milling groove machine pillar parts to have a overall careful design, not only from machinery and the angle of hydraulic pressure check calculate for the major parts of pillar, but also have still made a set of feasible control scheme from autocontrol. It is better have completed the design requirement of expection.
Design
June 2002