液壓管路三通管接頭的注塑模具設計【側抽芯一模兩腔優秀課程畢業設計含17張CAD圖紙帶任務書+開題報告+外文翻譯】-zsmj29

液壓管路三通管接頭的注塑模具設計【側抽芯一模兩腔優秀課程畢業設計含17張CAD圖紙帶任務書+開題報告+外文翻譯】-zsmj29

液壓管路三通管接頭的注塑模具設計【側抽芯一模兩腔】

摘  要

　　塑料注射模具是成型塑料的一種重要工藝裝備，通過對液壓管路三通塑料模具設計,能夠全面的了解塑料模具設計的基本原則、方法.并能較為熟練的使用Proe4.0、AUTOCAD軟件進行塑料模具設計,提高自己的繪圖能力。為今后從事設計工作打下了堅實的基礎。

　　隨著現代工業發展的需要，塑料制品在工業、農業、日常生活和軍事等各個領域的應用范圍越來越廣，質量要求也越來越高，中國已經成為全球最大的塑料市場之一，塑料制品產量全球第二。為了做到高質、高效、低成本，從而提高市場占有率，注塑模具的開發、設計、加工與CAD/CAE/CAM技術相結合具有重大意義。

本次主要設計是對液壓管路三通注射模的設計, 重點對塑件的成型原理、原料選用和注射技術進行分析。通過根據形狀、尺寸、精度及表面質量要求的分析結果，確定所需的模塑成型方案，制品的后加工、分型面的選擇、型腔的數目和排列、成型零件的結構、澆注系統等。

關鍵詞：注塑模；模具結構；側型芯；工藝方案

Abstract

Plastic injection mold is an important technological equipment of plastic forming, based on the hydraulic piping tee plastic mold design, can fully understand the basic principles, methods of plastic mold design. And can be used more skilled Proe4.0, AUTOCAD software for plastic mold design, improve their ability to draw. Engaged in the design for the future work laid a solid foundation.

With the needs of the development of modern industry, plastic products in industry, agriculture, military and other fields of daily life and the application scope is more and more wide, the quality requirements also more and more high, China has become one of the world's largest plastics market, plastic products production in the world's second. In order to achieve high quality, high efficiency, low cost, and improve the market share, injection mold development, design, processing combined with CAD/CAE/CAM technology is of great significance.

The main design is the design of injection mold hydraulic piping tee, focus on the forming principle of plastic parts, raw materials selection and injection technology were analyzed. By according to the shape, size, precision and surface quality requirement analysis, to determine the required molding solutions, products after processing, the choice of the parting surface, cavity number and arrangement, the structure of molding parts, pouring system, etc.

Key words: injection mold; The mold structure; The side core; The processing plan

目    錄

前言 1

1  研究概況 1

1.1國外研究現狀1

1.2國內研究現狀1

2  塑件制品分析 2

2.1 明確制品設計要求 2

2.2 明確制品批量 3

2.3 材料選擇及性能 3

2.3.1 材料選擇 3

2.4 成型設備 4

2.5 拔模斜度 4

2.6 計算制品的體積和質量 5

2.6.1表面質量的分析 5

2.6.2塑件的體積重量 5

3  注射機及成型方案的確定 6

3.1 注射機的確定 6

3.2 成型方案的確定 6

3.2.1 成型設備的選擇 6

3.2.2成型的特點 7

3.2.3成型的原理 7

3.2.4成型過程 7

4  型腔數的確定及分型面的選擇 9

4.1 型腔數的確定 9

4.2 分型面的選擇 10

4.2.1 分型面的主要選擇原則 10

4.3 確定型腔的排列方式 11

4.4 標準模架的選用 11

5  成型零部件的設計與計算 13

5.1 凸模設計 13

5.2 凹模的設計 13

5.3 成型零件工作尺寸的計算 14

5.3.1 模腔工作尺寸的計算 14

6  澆注系統的設計 13

6.1 主流道設計 16

6.2分主流道的設計 16

6.3 澆口的設計 17

6.4 平衡進料 17

6.5冷料穴設計 18

7  排氣與冷卻系統的設計 13

7.1 冷卻系統設計的原則 18

7.2 冷卻水路的計算 19

7.3 排氣系統的設計 20

8  頂出與抽芯機構的設計 20

8.1 推桿復位裝置 20

8.2 抽芯機構的選擇 21

8.3 抽芯距的計算 21

8.4斜導柱抽芯的設計 21

8.5滑塊的設計 23

8.5側向分型與抽芯機構三維效果圖如下所示： 23

9  導向機構的設計 24

9.1 導向、定位機構的主要功能 24

9.2導向機構的設計 24

9.2.1 導柱的設計 24

10  注塑機與模具各參數的校核 25

10.1 工藝參數的校核 25

10.2 模具安裝尺寸的校核 26

10.2.1 噴嘴的校核 26

10.2.2 定位圈尺寸的校核 26

10.2.3 模具外形尺寸的校核 26

10.2.4 模具厚度的校核 26

10.2.5 安裝參數的校核 26

10.3 開模行程的校核 27

11  模具安裝和試模 27

12  主要成型零件加工工藝 28

13  結論 30

謝  辭 32

參考文獻 33

【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】

三通管接頭塑件.dwg

三通管接頭的注塑模具設計【側抽芯液壓管路】任務書.doc

側抽芯液壓管路三通管接頭注塑模具設計開題報告.doc

動模座板.dwg

型腔.dwg

型腔固定板.dwg

型芯.dwg

型芯固定板.dwg

外文翻譯原文.doc

外文翻譯譯文.doc

契緊塊.dwg

定位環.dwg

定模座板.dwg

推桿固定板.dwg

推桿支撐板.dwg

支承釘.dwg

文件清單.txt

斜導柱.dwg

液壓管路三通管接頭的注塑模具設計【側抽芯一模兩腔】.doc

滑塊.dwg

滑塊固定塊.dwg

滑塊鑲件.dwg

裝配圖.dwg

第 1頁 共 28頁 on of to ——he of In as a to is DM is to of to by to of of an a in an 1. ne of is to be it to is no is in to to be in a if it is of of we at in it to a on of of in of in of of a of to us to a of in or in a of is in of 1], [2] 3], it is it is is a it to at an of 第 2頁 共 28頁 as an a in a It to is in 3], to to of in of is in an of a 2. of an he is by a is is an in 4] 1) by of a a as by 167 of is to of a of in by 1. to a 4], to in (a) AD of (b) in a be BS (c) of a a it (d) of 第 3頁 共 28頁 (e) of by of to of in it in to in 3. an 5] 6] is an in a an an is by an a it is to an a DC in on a or in is by 7] 8] at a 00 ml/l, 10 g/l), 50 g/l), 30 cc/l) 03 (2 cc/l). of is to of we is to is us to an of in 0 of is a of as an is a by of by in of of a 03 is an of to of in of is to of to in in as a pH to as ? 600 400 500 mm in ? 00 W. ? of ? of by a a 第 4頁 共 28頁 ? in 0 A 6 V. ? a 9%. ? of 2 A/ 5 5 °C) 4. ne of of of at 2, it be in .5 2 A/40 80 at ± 0.2 a 5 °C. If pH of is .5 5 °C 20 HV 60 by to a of be on as at of or On of a is 00–250 in It is to an is 00 it is to 290 520–595 760–800 in a it be of be of to of is in a it is of of is it is to a as as a of as 2. ± T = 45 °C. 第 5頁 共 28頁 5. n to of in in to a in in a of at 5, 25, 40 0 s, in to be in a 10×. on to in it is to to in a is by In a mm in is in it be by of to as a to of of is to be a to a of . . °C) A/ 1 5 5 5 5 3 of a of It by DM is to is a It be 4, , a it be a of in a in 5, ° it to 第 6頁 共 28頁 it is to at of by of 3. (×150), . 4. (×300), . 5. (×300), . 第 7頁 共 28頁 at a a a of a If is in a to it be in of is 6), is to a at of a is to of a a 9]. a of as a in On it to of in of 6. of (×600), . 6. ne of a an is to a of at a on A a 160 mm 12.7 mm .3 is in a or to 10] is 3 μm) to in an of to In of 0 an is to at a of 第 8頁 共 28頁 7. of P, C, it of as by by 00 on of In of in of in by 7) it a of to in of in A 6. 7. by of in it a in in 0%. In A 6 0%. 8. in it to is to of in of of be by to of 第 9頁 共 28頁 1] of J. 110 (2001), 186–196. [2] . of J. 111 (2001), 286–294. [3] J. A. A 6, 14 1996. [4] M. et en la de de 84 (2002), p. 557. 第 10頁 共 28頁 [5] et 1989). [6] E. de 2000 (. [7] A. 1989). [8] A. 1989). [9] J. 1993). [10] 1994. ( 3). to of 006 s an to to or to a of to to of 第 11 頁 共 28頁 an to be of to of on it’s to in an PM is to it in a to a PM is a to be a in no a a is no to PM is in is to on is so it’s of to to is in as in is is is 0 RC so a or on ni