【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
畢業設計（論文）
汽車觀后鏡刮水及清洗系統設計
摘要:安全是人類生存的基本要求，作為主動安全裝置的后視鏡是駕駛員間接視野的主要特征。本設計首先對后視鏡的結構形式及研究狀況進行了介紹；針對目前觀后鏡在雨天雨水及時常有灰塵附于上視野變差的問題，提出了具有刮水及清洗系統的后視鏡總體布置設計的思路；對后視鏡刮水傳動機構及清洗系統作了詳細的設計，完成了相應機構設計計算過程；并對刮水及清洗系統控制電路了進行了設計。所設計的后視鏡系統可以在下雨天間隙清除鏡面上附著的雨水，在鏡面上附著塵土?xí)r根據需要進行清洗，實現后視鏡良好視野。
關鍵詞：后視鏡 刮水裝置 清洗系統 設計
The design of Rear view mirror wiper and washing system
Abstract：Security is the basic requirements of human existence, as an active safety device，the Rear view mirror is the driver's main features of indirect vision. At first,the article introduces the structure and the research status of the Rear view mirror；Against the deterioration of vision problem when the Rear view mirror used in rain day or dust on it ,the rearview mirror general design ideas of a cleaning system with wiper are been Proposed . and the transmission of the rear-view mirror wiper cleaning system detailed design, completion of the corresponding mechanism design calculation process, and the wiper and washing system control circuit has been designed. The design of the mirror system can clear the water on the rain mirror when attaches to the rain, and it can clean the mirror when the mirror attaches to dust as needed to achieve good vision mirror.
Keywords：Rear view mirror wiping device washing system Design
目錄
1.引言 1
1.1汽車后視鏡的國內外研究現狀 .. .... 1
1.2后視鏡刮水器研究的目的意義 2
1.3課題來源 2
2. 后視鏡刮水器及清洗系統的方案設計 4
2.1概述 4
2.2方案設計 4
2.2.1設計方案的確定 4
2.2.2驅動方式的選擇 4
2.2.3確定傳動方式 5
2.2.4確定螺桿長度和螺母的移動范圍 5
2.2.5確定清洗裝置方案 5
3. 后視鏡傳動機構設計 6
3.1電動機的選擇 6
3.1.1刮水電動機功率選擇 6
3.1.2 確定電動機的轉速 6
3.2 齒輪的設計 6
3.2.1.選擇齒輪類型、材料及精度等級 6
3.2.2.按齒面接觸疲勞強度設計 7
3.2.3 按齒根彎曲強度設計 9
3.2.4幾何尺寸計算 11
3.3軸的設計 12
3.3.1輸出軸的設計計算 12
3.3.2輸入軸的設計 13
3.3.3中間軸的設計 14
3.4軸承的設計 15
3.4.1中間軸軸承的設計 15
3.4.2輸出軸軸承的設計 19
3.5螺桿、螺母的設計 20
4. 后視鏡刮水及清洗系統的控制電路設計 27
4.1概述 27
4.2電路組成 27
4.3 刮水器往復運動電路設計 28
4.4清洗電路原理設計 28
4.5刮水片自動復位電路設計 29
5. 參考文獻 31
6. 小結 31
致謝 33
3