壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件,所見所得,電腦查看更方便。Q 197216396 或 11970985
減速電機箱體加工的組合機床總體設計及主軸箱設計
摘 要
本次設計的題目是“減速電機箱體加工的組合機床總體設計及主軸箱設計”。
由于組合機床可以同時進行多刀位加工,實行工序高度集中,這樣就大大縮短了輔助時間和加工時間。
組合機床在自動化生產中得到越來越多的使用。
根據本設計的要求,首先仔細分析被加工零件的特征,將工序適當集中在一起;其次有步驟的進行總體
設計,工藝方案的擬訂,切削用量的確定,三圖的設計;最后進行主軸箱的設計和進行有關齒輪及軸的校核。
關鍵詞: 組合機床 主軸箱 主軸
Abstract
The graduate project is entitled cutting parameter"the design of modular
machine tool and spindle box of the speed reduction motor box double-sided
processing".
As modular machine tool can carry out multitool bit processing and its
procedure is highly centralized ,it can save a lot of auxiliary time and
processing time . Modular machine tools are used more and more In the automatic
production.
According to the requirements of this design, we should analysis the
characteristics of the processing parts and come these processes together
Reasonably at first. Secondly, we can do the whole design by steps, decide
process scheme and cutting parameter, and design "the three picture".Finally, we
can design the spindle box and check the gear and the shaft.
Keywords: Modular machine tool ?Spindle box Spindle
參考文獻
[1]李益民主編.機械制 工藝設計 . :機械工 ,1994.7
[2] 本 主編.機械加工 量 . : 工 ,1999
[3]電 .切削用量
[4] 主編.機械制 . : 工大 ,2005.1
[5] ?主編.¢£?合¥ ?量. :機械工 ,2005.6
[6]§currency1 主編.機械加工工藝' . :機械工 ,2004.9
[7]“? 工大 機械??組.機械制 fifl設計 –?
[8]機械加工工藝?·設計 編 ?.機械加工工藝?·設計 . :機械工 ,1998.6
[9]???主編.組合機床設計 . :機械工 ,1996.8
[10]電 .組合機床圖