摘要
校園電動車是近幾年出現的一種新興交通工具。校園電動車有著節能,環保,便捷等諸多的優點。因此本課題具有很強的現實意義和接近實際水平的設計要求,尤其是對機械設計部分和電氣控制部分的設計。
本畢業設計主要進行了電動車的機械部分的分析和設計,包括電動車的減速器、差速器、軸承的選擇設計、各主要零部件的強度校核與計算、以及基本的機械傳動部分的實現等。通過所設計好機械各部分或者整體部分的結構以及相關尺寸,利用制圖軟件CAD進行相關的配圖的繪制以及其他零件圖的繪制。
根據電動車前進、后退、制動等基本控制要求,給出電動機的電氣控制設計。
關鍵詞: 校園電動車;交通工具;強度校核;機械傳動
Abstract
Campus electric vehicle is the emergence of a new transport in recent years. Campus electric car has energy-saving, environmentally friendly, convenient, and many other advantages. Therefore, this issue has a strong practical and realistic level design requirement, especially the part of design for mechanical design and electrical control part.
The graduation project is mainly for the electric vehicle analysis and design of mechanical parts. Including electric reducer, differential, bearing choice design, the major components Strength check and calculation, and basic mechanical transmission part of the implementation and so on. Designed by a good mechanical parts or the whole part of the structure and related dimensions, Use graphics software related with CAD drawing and other component drawing.
According to electric cars forward, reverse, brake control and other basic requirements, electrical motor control design can be given.
Keywords: campus electric vehicles; transport; strength check; mechanical transmission
目 錄
1緒論 1
1.1概述 1
1.2電動車的優勢與發展 2
1.3本設計的主要任務 3
2 機械部分設計 4
2.1概述 4
2.1.1基本要求 4
2.1.2 基本數據 4
2.2 傳動部分設計 5
2.2.1減速器傳動比計算 5
2.2.2 齒型選擇 6
2.2.3 載荷計算 6
2.2.4 齒輪材料選擇 7
2.2.5 齒輪強度計算 8
2.3 差速器設計 12
2.3.1 對稱式圓錐行星齒輪差速器原理 12
2.3.2 對稱式圓錐行星齒輪差速器結構 14
2.3.3 差速器齒輪基本參數選擇 14
2.3.4 差速器齒輪強度計算 17
2.4 軸承選擇與校核 18
2.4.1 概述 18
2.4.2 滾動軸承類型及代號 19
2.4.3 滾動軸承選擇 21
2.4.4 滾動軸承約束設計 22
3電動車電氣控制設計 24
3.1主電路 24
3.1.1 H型雙極模式PWM控制 24
3.1.2控制電路 25
3.1.3 SG3525的內部電路和參數 26
3.2電動車電池設計方案 27
3.2.1 電池槽 27
結論 28
致謝 29
參考文獻 30