購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
河南機電高等?？茖W(xué)校材料工程系畢業設計說明書/論文
（畢業設計/論文題目）
摘 要
本設計是骨架注塑模，特點為薄壁骨架，采用材料為聚苯乙烯，模具采用延時彎銷機構，產品自動脫落，無需頂出板。這樣使模具結構更簡單化，重量減輕，而且省材。工作過程為：塑料粉末送至料斗，開始加熱，加熱溫度為265——500F之間。模具閉合，螺桿前行在壓力作用下熔融塑料進入模具型腔。注塑完畢，動模具后退，模具打開，產品落下。模具閉合，由復位桿復位，準備下一次的注塑。
關鍵詞： 模具 骨架 注塑模
（畢業設計/論文英文題目）
Abstract
This topic is injection mold for framework. The charactoristice is a thin wall framework. PS are use by this plastics .This mold adoption bend to sell the organization. The part may be down off and don’t need ejector plate and ejector retainer plate. This make the stmcture of the mold turned more simple,the weight ease ,and the provinle material. Plastic powder is loaded into the feed hopper and a centain amount feed into the heating chamber when the planger draws back. Heating temperatures range from 265to500F. After the mold is closed the plunger moves forward ,forcing some of the fluid plastic ynto the mold cavity under pressures. When this over ,the part may be down off when the mold opens. Returns the ejector plate back to its original podition when the mold is colsed. And ready for next.
Keyword: mold framework injection mold
2