喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
徐州工程學院畢業設計(論文)
摘要
起重機械廣泛應用于工礦企業、港口碼頭、車站倉庫、建筑工地、海洋開發、宇宙航行等各個工業部門，可以說陸地、海洋、空中、民用、軍用各個方面都有起重機械在進行著有效的工作。
起重機械與運輸機械發展到現在，已經成為合理組織成批大量生產和機械化流水作業的基礎，是現代化生產的重要標志之一。在我國四個現代化的發展和各個工業部門機械化水平、勞動生產率的提高中，起重機必將發揮更大的作用。
此次設計的起重機為50/10t雙梁橋式起重機，主要用于各車間、分段生產線和鋼材堆場等處。橋式起重機本身作橫向移動，車架上的絞車作縱向移動，吊在絞車上的吊鉤作垂向移動，三個方向的運動的合成才能使起重機起作用。為了防止橋式起重機在駕駛員看不清楚具體的吊鉤運動方式，地面上一般配備有起重工進行指揮或夾、放吊鉤。
本課題主要對50/10t雙梁橋式起重機的主起升機構進行總體設計，設計過程中查閱了大量國內外的相關資料，所做的設計運用了大量的專業課程。首先通過確定傳動方案，選擇滑輪組和吊鉤組，選擇合適的鋼絲繩，計算滑輪的主要尺寸，確定卷筒尺寸并驗算其強度，計算高速浮動軸，選擇合適的電動機、減速器、制動器和聯軸器。要求起重設備運行平穩, 定位準確, 安全可靠, 技術性能穩定。
關鍵詞：起重機；橋式起重機；起升機構設計
Abstract
The hoisting machinery widely applies in the industrial and mining establishment, the harbor wharf, the station warehouse, the construction site, the ocean development, the astronautics and so on each industry sector, it may say that the land, the sea, airborne, civil, the military each aspect has the hoisting machinery to carry on the effective work.
The hoisting machinery and the transport machinery develops to the present, have already became the reasonable organization in groups mass productions and the mechanization streamlined production foundation, it is the one of modernized production important symbols. In our country four modernizations' development and each industry sector mechanization level, in labor productivity's enhancement, the hoist crane will certainly to play the major role.
This design of hoist crane is the 50/10t double beam bridge type hoist crane, mainly uses in various workshops, the partition production line and the steel products dump site and so on place. The bridge-type hoist crane itself makes the derailing, on frame's winch makes the longitudinal shift, hangs makes the vertical migration on winch's lift hook, three direction's movement's synthesis can cause the hoist crane to have an effect. In order to prevent the bridge-type hoist crane to look at not the clear concrete lift hook mode of motion in the pilot, as soon as in the ground is a match has the heavy industry to carry on the direction or to clamp, puts the lift hook.
This topic mainly carries on the system design to the 50/10t double beam bridge type hoist crane's host hoisting mechanism, designed in the process to consult the massive domestic and foreign correlation data, did the design has utilized the massive special courses. First through the definite transmission plan, the choice block and tackle and the lift hook group, chooses the appropriate steel wire, calculates pulley's main dimension, the definite reel size and checking calculation its intensity, the computation floats the moving axis high speed, chooses the appropriate electric motor, the reduction gear, the brake and the shaft coupling. The request hoisting equipment movement is steady, the localization is accurate, safe reliable, the technical performance is stable.
Key words crane bridge crane lifting mechanism design
II
徐州工程學院畢業設計(論文)
目 錄
1緒論 1
1.1起重機概述 1
1.2起重機的分類 1
1.3起升機構介紹 2
2起重機的國內外發展?fàn)顩r 4
2.1起重機的國外發展?fàn)顩r 4
2.2起重機的國內發展?fàn)顩r 6
3橋式起重機的主要技術參數與工作級別 8
3.1橋式起重機的主要技術參數 8
3.2橋式起重機的工作級別 10
4傳動方案的選擇 11
4.1驅動裝置的布置方式 11
4.1.1電動起升機構 11
4.1.2液壓起升機構 11
5鋼絲繩的選擇 13
5.1鋼絲繩的特性 13
5.2鋼絲繩的種類 13
5.2.1根據鋼絲繩的捻繞次數分類 13
5.2.2按鋼絲繩的捻向分類 13
5.2.3根據股的形狀分類 14
5.2.4根據股的構造分類 14
5.2.5根據鋼絲表面處理分類 15
5.2.6根據鋼絲繩股數的數目分類 15
5.2.7根據繩芯分類 15
5.3鋼絲繩的選擇 15
6滑輪、卷筒的計算 17
6.1卷筒的構造與類型 17
6.1.1按鋼絲繩在卷筒上的卷繞層數分類 17
6.1.2按卷筒的表面不同分類 17
6.1.3.按卷筒的制作方法分類 18
6.2卷筒、滑輪的設計計算 18
6.2.1滑輪、卷筒最小直徑的確定 18
6.2.2卷筒長度和厚度的計算 18
6.2.3卷筒轉速 19
6.2.4卷筒壓應力驗算 20
6.2.5卷筒強度驗算 20
6.3鋼絲繩在卷筒上的固定方法 21
7初選電動機和減速器的選擇 22
7.1初選電動機 22
7.2減速器的選擇 22
8制動器的選擇 24
8.1概述 24
8.2制動裝置的分類 24
8.2.1按制動器的結構形式分類 24
8.2.2按制動器工作狀態分類 25
8.2.3按制動器的驅動方式分類 25
8.3塊式制動器 25
8.4塊式制動器的設計 27
8.5起動時間與起動加速度的驗算 29
8.6電動機起動可靠性的驗算 29
9.聯軸器的選擇和高速浮動軸驗算 31
9.1聯軸器選擇 31
9.2高速浮動軸的驗算 32
結論 33
致謝 34
參考文獻 35
附錄 36
附錄1 36
2