FDA食品添加劑使用衛生標準.rar
FDA食品添加劑使用衛生標準.rar,FDA,食品添加劑,使用,衛生標準
[Code of Federal Regulations]
[Title 21, Volume 3]
[Revised as of April 1, 2006]
[CITE: 21CFR178]
TITLE 21--FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION
DEPARTMENT OF HEALTH AND HUMAN SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION (CONTINUED)
?
PART 178
INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND SANITIZERS
?
Subpart A [Reserved]
Subpart B--Substances Utilized To Control the Growth of Microorganisms
Sec. 178.1005 Hydrogen peroxide solution.
------------------------------------------------------------------------
Substances Limitations
------------------------------------------------------------------------
Ethylene-acrylic acid copolymers.......... Complying with
177.1310 of this chapter.
Ethylene-carbon monoxide copolymers....... Complying with
177.1312 of this chapter.
Ethylene-methyl acrylate copolymer resins. Complying with
177.1340 of this chapter.
Ethylene-vinyl acetate copolymers......... Complying with
177.1350 of this chapter.
Ionomeric resins.......................... Complying with
177.1330 of this chapter.
Isobutylene polymers...................... Complying with
177.1420 (a)(1) and (a)(2)
of this chapter.
Olefin polymers........................... Complying with
177.1520 of this chapter.
Polycarbonate resins...................... Complying with
177.1580 of this chapter.
Polyethylene-terephthalate polymers....... Complying with
177.1630 of this chapter
(excluding polymers
described in
177.1630(c)) of this
chapter.
Poly-l-butene resins and butene/ethylene Complying with
copolymers. 177.1570 of this chapter.
Polystryrene and rubber-modified Complying with
polystyrene polymers. 177.1640 of this chapter.
Vinylidene chloride/methyl acrylate Complying with
copolymers. 177.1990 of this chapter.
------------------------------------------------------------------------
------------------------------------------------------------------------
Substances Limitations
------------------------------------------------------------------------
Ethylene-acrylic acid copolymers.......... Complying with
177.1310 of this chapter.
Ethylene-carbon monoxide copolymers....... Complying with
177.1312 of this chapter.
Ethylene-methyl acrylate copolymer resins. Complying with
177.1340 of this chapter.
Ethylene-vinyl acetate copolymers......... Complying with
177.1350 of this chapter.
Ionomeric resins.......................... Complying with
177.1330 of this chapter.
Isobutylene polymers...................... Complying with
177.1420 (a)(1) and (a)(2)
of this chapter.
Olefin polymers........................... Complying with
177.1520 of this chapter.
Polycarbonate resins...................... Complying with
177.1580 of this chapter.
Polyethylene-terephthalate polymers....... Complying with
177.1630 of this chapter
(excluding polymers
described in
177.1630(c)) of this
chapter.
Poly-l-butene resins and butene/ethylene Complying with
copolymers. 177.1570 of this chapter.
Polystryrene and rubber-modified Complying with
polystyrene polymers. 177.1640 of this chapter.
Vinylidene chloride/methyl acrylate Complying with
copolymers. 177.1990 of this chapter.
------------------------------------------------------------------------
Hydrogen peroxide solution identified in this section may be safely used to sterilize polymeric food-contact surfaces identified in paragraph (e)(1) of this section.
(a) Identity. For the purpose of this section, hydrogen peroxide solution is an aqueous solution containing not more than 35 percent hydrogen peroxide (CAS Reg. No. 7722-84-1) by weight, meeting the specifications prescribed in paragraph (c) of this section.
(b) Optional adjuvant substances. Hydrogen peroxide solution identified in paragraph (a) of this section may contain substances generally recognized as safe in or on food, substances generally recognized for their intended use in food packaging, substances used in accordance with a prior sanction or approval, and substances permitted by applicable regulations in parts 174 through 179 of this chapter.
(c) Specifications. Hydrogen peroxide solution shall meet the specifications of the "Food Chemicals Codex," 3d Ed. (1981), pp. 146-147, which is incorporated by reference (Copies may be obtained from the National Academy Press, 2101 Constitution Ave. NW., Washington, DC 20418, or may be examined at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.), and the United States Pharmacopeia XX (1980), except that hydrogen peroxide may exceed the concentration specified therein.
(d) Limitations. No use of hydrogen peroxide solution in the sterilization of food packaging material shall be considered to be in compliance if more than 0.5 part per million of hydrogen peroxide can be determined in distilled water packaged under production conditions (assay to be performed immediately after packaging).
(e) Conditions of use. (1) Hydrogen peroxide solution identified in and complying with the specifications in this section may be used by itself or in combination with other processes to treat food-contact surfaces to attain commercial sterility at least equivalent to that attainable by thermal processing for metal containers as provided for in part 113 of this chapter. Food-contact surfaces include the following:
(2) The packaging materials identified in paragraph (e)(1) of this section may be used for packaging all commercially sterile foods except that the olefin polymers may be used in articles for packaging foods only of the types identified in 176.170(c) of this chapter, table 1, under Categories I, II, III, IV-B, V, and VI.
(3) Processed foods packaged in the materials identified in paragraph (e)(1) of this section shall conform with parts 108, 110, 113, and 114 of this chapter as applicable.
[46 FR 2342, Jan. 9, 1981, as amended at 49 FR 10111, Mar. 19, 1984; 49 FR 32345, Aug. 14, 1984; 49 FR 37747, Sept. 26, 1984; 51 FR 45881, Dec. 23, 1986; 52 FR 26146, July 13, 1987; 53 FR 47186, Nov. 22, 1988; 54 FR 5604, Feb. 6, 1989; 54 FR 13167, Mar. 31, 1989; 54 FR 6365 Feb. 9, 1989; 55 FR 47055, Nov. 9, 1990; 57 FR 32423, July 22, 1992]
Sec. 178.1010 Sanitizing solutions.
Sanitizing solutions may be safely used on food-processing equipment and utensils, and on other food-contact articles as specified in this section, within the following prescribed conditions:
(a) Such sanitizing solutions are used, followed by adequate draining, before contact with food.
(b) The solutions consist of one of the following, to which may be added components generally recognized as safe and components which are permitted by prior sanction or approval.
(1) An aqueous solution containing potassium, sodium, or calcium hypochlorite, with or without the bromides of potassium, sodium, or calcium.
(2) An aqueous solution containing dichloroisocyanuric acid, trichloroisocyanuric acid, or the sodium or potassium salts of these acids, with or without the bromides of potassium, sodium, or calcium.
(3) An aqueous solution containing potassium iodide, sodium p-toluenesulfonchloroamide, and sodium lauryl sulfate.
(4) An aqueous solution containing iodine, butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol having a cloudpoint of 90deg. -100 deg. C in 0.5 percent aqueous solution and an average molecular weight of 3,300, and ethylene glycol monobutyl ether. Additionally, the aqueous solution may contain diethylene glycol monoethyl ether as an optional ingredient.
(5) An aqueous solution containing elemental iodine, hydriodic acid, a-(p-nonylphenyl)-omega-hydroxypoly-(oxyethylene) (complying with the identity prescribed in 178.3400(c) and having a maximum average molecular weight of 748) and/or polyoxyethylene-polyoxypropylene block polymers (having a minimum average molecular weight of 1,900). Additionally, the aqueous solution may contain isopropyl alcohol as an optional ingredient.
(6) An aqueous solution containing elemental iodine, sodium iodide, sodium dioctylsulfosuccinate, and polyoxyethylene-polyoxypropylene block polymers (having a minimum average molecular weight of 1,900).
(7) An aqueous solution containing dodecylbenzenesulfonic acid and either isopropyl alcohol or polyoxyethylene-polyoxypropylene block polymers (having a minimum average molecular weight of 2,800). In addition to use on food-processing equipment and utensils, this solution may be used on glass bottles and other glass containers intended for holding milk.
(8) An aqueous solution containing elemental iodine, butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol having a minimum average molecular weight of 2,400 and [alpha]-lauroyl-omega-hydroxypoly (oxyethylene) with an average 8-9 moles of ethylene oxide and an average molecular weight of 400. In addition to use on food-processing equipment and utensils, this solution may be used on beverage containers, including milk containers or equipment. Rinse water treated with this solution can be recirculated as a preliminary rinse. It is not to be used as final rinse.
(9) An aqueous solution containing n-alkyl (C12-C18) benzyldimethylam-monium chloride compounds having average molecular weights of 351 to 380. The alkyl groups consist principally of groups with 12 to 16 carbon atoms and contain not more than 1 percent each of groups with 8 and 10 carbon atoms. Additionally, the aqueous solution may contain either ethyl alcohol or isopropyl alcohol as an optional ingredient.
(10) An aqueous solution containing trichloromelamine and either sodium lauryl sulfate or dodecyl- benzenesulfonic acid. In addition to use on food-processing equipment and utensils and other food-contact articles, this solution may be used on beverage containers except milk containers or equipment.
(11) An aqueous solution containing equal amounts of n-alkyl (C12-C18) benzyl dimethyl ammonium chloride and n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride (having an average molecular weight of 384). In addition to use on food-processing equipment and utensils, this solution may be used on food-contact surfaces in public eating places.
(12) An aqueous solution containing the sodium salt of sulfonated oleic acid, polyoxyethylene-polyoxypropylene block polymers (having an average molecular weight of 2,000 and 27 to 31 moles of polyoxypropylene). In addition to use on food-processing equipment and utensils, this solution may be used on glass bottles and other glass containers intended for holding milk. All equipment, utensils, glass bottles, and other glass containers treated with this sanitizing solution shall have a drainage period of 15 minutes prior to use in contact with food.
(13) An aqueous solution containing elemental iodine and alkyl (C12-C15) monoether of mixed (ethylene-propylene) polyalkylene glycol, having a cloud-point of 70deg. -77 deg. C in 1 percent aqueous solution and an average molecular weight of 807.
(14) An aqueous solution containing iodine, butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, having a cloud-point of 90deg. -100 deg. C in 0.5 percent aqueous solution and an average molecular weight of 3,300, and polyoxyethylene-polyoxypropylene block polymers (having a minimum average molecular weight of 2,000).
(15) An aqueous solution containing lithium hypochlorite.
(16) An aqueous solution containing equal amounts of n-alkyl (C12-C18) benzyl dimethyl ammonium chloride and n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride (having average molecular weights of 377 to 384), with the optional adjuvant substances tetrasodium ethylenediaminetetraacetate and/or alpha-(p-nonylphenol)-omega-hydroxy poly (oxyethylene) having an average poly- (oxyethylene) content of 11 moles. Alpha-hydro-omega-hydroxypoly-(oxyethylene) poly(oxypropoylene) (15 to 18 mole minimum) poly (oxyethylene) block copolymer, having a minimum molecular weight of 1,900 (CAS Registry No. 9003-11-6) may be used in lieu of alpha- (p-nonylphenol)-omega-hydroxy- poly(oxyethylene) having an average poly(oxyethylene) content of 11 moles. In addition to use on food-processing equipment and utensils, this solution may be used on food-contact surfaces in public eating places.
(17) An aqueous solution containing di-n-alkyl(C8-C10)dimethyl ammonium chlorides having average molecular weights of 332-361 and either ethyl alcohol or isopropyl alcohol. In addition to use on food-processing equipment and utensils, this solution may be used on food-contact surfaces in public eating places.
(18) An aqueous solution containing n-alkyl(C12-C18) benzyldimethylammo-nium chloride, sodium metaborate, alpha-terpineol and alpha[p-(1,1,3,3-tetramethylbutyl)phenyl] -omega-hydroxy-poly (oxyethylene) produced with one mole of the phenol and 4 to 14 moles ethylene oxide.
(19) An aqueous solution containing sodium dichloroisocyanurate and tetrasodium ethylenediaminetetraacetate. In addition to use on food-processing equipment and utensils, this solution may be used on food-contact surfaces in public eating places.
(20) An aqueous solution containing ortho-phenylphenol, ortho-benzyl-para-chlorophenol, para-tertiaryamylphenol, sodium -alpha-alkyl(C12-C15)-omega-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole, potassium salts of coconut oil fatty acids, and isopropyl alcohol or hexylene glycol.
(21) An aqueous solution containing sodium dodecylbenzenesulfonate. In addition to use on food-processing equipment and utensils, this solution may be used on glass bottles and other glass containers intended for holding milk.
(22) An aqueous solution containing (1) di-n-alkyl(C8-C10) dimethylammonium chloride compounds having average molecular weights of 332-361, (2) n-alkyl (C12-C18) benzyldimethylammonium chloride compounds having average molecular weights of 351-380 and consisting principally of alkyl groups with 12 to 16 carbon atoms with or without not over 1 percent each of groups with 8 and 10 carbon atoms, and (3) ethyl alcohol. The ratio of compound (1) to compound (2) is 60 to 40.
(23) An aqueous solution containing n-alkyl (C12-C16) benzyl-dimethylammonium chloride and didecyldimethylammonium chloride.
(24) An aqueous solution containing elemental iodine (CAS Reg. No. 7553-56-2), alpha-[p-(1,1,3,3-tetramethylbutyl)-phenyl]-omega-hydroxypoly-(oxyethylene) produced with one mole of the phenol and 4 to 14 moles ethylene oxide, and alpha-alkyl(C12-C15)-omega-hydroxy[poly(oxyethylene) poly(oxypropylene)] (having an average molecular weight of 965).
(25) An aqueous solution containing elemental iodine (CAS Reg. No. 7553-56-2), potassium iodide (CAS Reg. No. 7681-11-0), and isopropanol (CAS Reg. No. 67-63-0). In addition to use on food processing equipment and utensils, this solution may be used on beverage containers, including milk containers and equipment and on food-contact surfaces in public eating places.
(26) [Reserved]
(27) An aqueous solution containing decanoic acid (CAS Reg. No. 334-48-5), octanoic acid (CAS Reg. No. 124-07-2), and sodium 1-octanesulfonate (CAS Reg. No. 5324-84-5). Additionally, the aqueous solution may contain isopropyl alcohol (CAS Reg. No. 67-63-0) as an optional ingredient.
(28) An aqueous solution containing sulfonated 9-octadecenoic acid (CAS Reg. No. 68988-76-1) and sodium xylenesulfonate (CAS Reg. No. 1300-72-7).
(29) An aqueous solution containing dodecyldiphenyloxidedisulfonic acid (CAS Reg. No. 30260-73-2), sulfonated tall oil fatty acid (CAS Reg. No. 68309-27-3), and neo-decanoic acid (CAS Reg. No. 26896-20-8). In addition to use on food-processing equipment and utensils, this solution may be used on glass bottles and other glass containers intended for holding milk.
(30) An aqueous solution containing hydrogen peroxide (CAS Reg. No. 7722-84-1), peracetic acid (CAS Reg. No. 79-21-0), acetic acid (CAS Reg. No. 64-19-7), and 1-hydroxyethylidene-1,1-diphosphonic acid (CAS Reg. No. 2809-21-4).
(31) An aqueous solution containing elemental iodine, alpha-alkyl(C10-C14)-omega-hydroxypoly(oxyethylene)poly-(oxypropylene) of average molecular weight between 768 and 837, and alpha-alkyl(C12-C18)-omega-hydroxypoly(oxyethylene) poly(oxypropylene) of average molecular weight between 950 and 1,120. In addition to use on food-processing equipment and utensils, this solution may be used on food-contact surfaces in public eating places.
(32) An aqueous solution containing (i) di-n-alkyl(C8-C10)dimethyl- ammonium chloride compounds having average molecular weights of 332 to 361, (ii) n-alkyl(C12-C18)benzyldimethyl- ammonium chloride compounds having average molecular weights of 351 to 380 and consisting principally of alkyl groups with 12 to 16 carbon atoms with no more than 1 percent of groups with 8 and 10, (iii) ethyl alcohol, and (iv) alpha-(p-nonylphenyl)-omega-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-nonylphenol with 9 to 12 moles of ethylene oxide. The ratio of compound (i) to compound (ii) is 3 to 2.
(33) An aqueous solution containing (i) di-n-alkyl-(C8-C10)-dimethylammonium chloride compounds having average molecular weights of 332 to 361; (ii) n-alkyl(C12-C18) -benzyldimethylammonium chloride compounds having molecular weights of 351 to 380 and consisting principally of alkyl groups with 12 to 16 carbon atoms with no more than 1 percent of the groups with 8 to 10; and (iii) tetrasodium ethylenediamine tetraacetate. Additionally, the aqueous solution contains either alpha-(p-nonylphenyl)-omega-hydroxypoly-(oxyethylene) or alpha-alkyl(C11-C15)-omega-hydroxypoly-(oxyethylene), each produced with 9 to 13 moles of ethylene oxide. The ratio of compound (i) to compound (ii) is 3 to 2.
(34) An aqueous solution of an equilibrium mixture of oxychloro species (predominantly chlorite, chlorate, and chlorine dioxide) generated either (i) by directly metering a concentrated chlorine dioxide solution, prepared just prior to use, into potable water to provide the concentration of available chlorine dioxide stated in paragraph (c)(29) of this section, or (ii) by acidification of an aqueous alka
收藏