購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
畢業設計成績?cè)u(píng)定手冊
論 文 題 目
輪式裝載機設計
學 生 姓 名
專 業
機械電子工程
班 級 學 號
指 導 教 師
分 院
2012年6月
畢業設計 成績?cè)u(píng)定表
（指導教師用）
姓 名
班級學號
0852110
專 業
機械電子工程
題 目
輪式裝載機設計
評 價 要 素
權 重
評 分
成 績
選 題
0.10
調 查 報 告
0.10
創 新 性
0.10
基礎理論與基本技能
0.20
撰 寫 質 量
0.20
可 行 性
0.15
學風與工作作風
0.15
指導教師評定成績（合計）
指導教師評語：
指導教師簽字：
年 月 日
畢業設計 成績?cè)u(píng)定表
（評閱人用）
姓 名
班級學號
專 業
機械電子工程
題 目
輪式裝載機設計
評 價 要 素
權 重
評 分
成 績
選 題
0.15
調 查 報 告
0.15
創 新 性
0.15
基礎理論與基本技能
0.20
撰 寫 質 量
0.20
可 行 性
0.15
評閱人評定成績（合計）
評閱人評語：
評閱人簽字：
年 月 日
畢業設計 成績?cè)u(píng)定表
（答辯委員會用）
姓 名
班級學號
專 業
機械電子工程
題 目
輪式裝載機設計
評 價 要 素
權 重
評 分
成 績
選 題
0.15
調 查 報 告
0.10
創 新 性
0.10
基礎理論與基本技能
0.10
撰 寫 質 量
0.10
可 行 性
0.15
答 辯
0.30
答辯委員會評定成績（合計）
答辯委員會評語：
答辯委員會主席簽字：
年 月 日
答辯委員會記錄
答辯學生姓名： 班級：
答辯記錄：
答辯委員會主席簽名：
年 月 日
本件在學生本人論文留存
答辯委員會委員名單
主席：
委員：
秘書：
畢業設計綜合成績表
姓 名
專 業
機械電子工程
班 級
1
題 目
輪式裝載機設計
指導教師評定成績
（X）
評 閱 人
評定成績
（Y）
答辯委員會評定成績
（Z）
0.3X+0.3Y+0.4Z
等 級
填表人： 教學副院長：
本件投學生本人檔案
答辯委員會委員名單
主席：
委員：
秘書：
畢業設計綜合成績表
姓 名
專 業
機械電子工程
班 級
題 目
輪式裝載機設計
指導教師評定成績
（X）
評 閱 人
評定成績
（Y）
答辯委員會評定成績
（Z）
0.3X+0.3Y+0.4Z
等 級
填表人： 教學副院長：
摘要
輪式裝載機屬于鏟土運輸機械類，是一種廣泛用于公路、鐵路、建筑、水電、港口和礦山等建設工程的土石方施工機械。具有作業速度快、效率高、機動性好、操作輕便等優點，對于加快工程建設速度，減輕勞動強度，提高工程質量，降低工程成本都發揮著重要的作用，是現代機械化施工中不可缺少的裝備之一。
本次設計以模塊的方式論述了輪式裝載機的發展以及用途、分類和相關參數、總體構造、傳動系統、制動系統、轉向系統、工作裝置和液壓系統的組成。在用途和分類中對裝載機的發動機功率、傳動形式、行走結構、裝卸方式?做了簡單的介紹。通過選用原則的敘述，使我們對裝載機使用性能有進一步的了解。另外，簡單列舉了國內外輪式裝載機發展現狀。眾所周知現在我國已成為全球矚目的裝載機生產大國，但我們還僅僅是制造“大”國，而不是制造“強”國。自主創新能力不足，缺少具有自主知識產權和較強國際競爭力的產品是根本原因。開發具有自主知識產權的核心技術，盡快縮短與國外大公司間的技術差距，提升產品的國際市場競爭力，是擺在國內裝載機企業面前一個十分迫切的問題。
關鍵詞：輪式裝載機 總體構造 傳動系統 制動系統 轉向系統 自動換擋 只能控制
Abstract
Wheel loader shovel soil mechanical belongs to transportation, is a widely used for highway, railway, construction, water and electricity, ports and mining and other construction engineering conditions of construction machinery. Work with speed, high efficiency and convenient operation, good mobility etc, and to speed up the construction speed, reduce labor intensity, improving engineering quality, reduce the cost for the project is an important role, is the modern mechanical construction of one of the indispensable equipment.
The design for the module way discusses the development and application of the wheel loader, classification and related parameters, general structure, transmission system, braking system, steering system, work device and the composition of the hydraulic system. In the use of the loader and classification of engine power, transmission form, and walking, structure, loading and unloading way do briefly introduced. Through the selection principle of narrative that we use to loader have further understanding of performance. In addition, simple summarizes the current situation of the development of wheel loader. As is known to all now China's has become a global attention the loader production country, but we still only a manufacturing "big" countries, and not to make "strong" countries. The independent innovation ability is insufficient, with independent intellectual property rights and the lack of a stronger international competitiveness of the products was the reason. Development with independent intellectual property rights of the core technology, shorten and foreign big company as soon as possible the technology gap between, improve product international market competition ability, is in the domestic front loader enterprise a very urgent question.
長春理工大學光電信息學院
畢業設計（論文）題目申報表
院 別 機電工程分院
教 研 室
指導教師 職稱 教授
職稱
年 月 日
題目名稱
輪式裝載機設計
題 目
類 別
設計類
√
題目
性質
結合實際
√
專
業
機械電子工程
參加本題目
學生人數
1
論文類
虛擬題目
題目來源、教師準備情況、主要培養學生哪些能力
課題來源：由指導教師擬訂結合我國機械制造及機電設計市場發展?fàn)顩r，進行設計的課題。
教師準備狀況：從事機械設計制造及其自動化領域的教學與研究30年，自1999年起自擬并指導該方向的畢業設計題目整10年，有一定的研究基礎。
主要培養學生哪些能力：文獻查閱與實際調研能力：外文資料翻譯能力：基礎理論與專業知識的綜合應用能力：數據資料的采集、處理、與分析能力、：計算機應用能力。
題 目 內 容 及 要 求
內容：從輪胎式專用底盤為基礎車，配置在、工作裝置及其操作系統，完成裝料，行走及其、卸料工作
要求：完成工作裝置的總體設計、鏟斗、連桿。動臂，搖臂的結構設計及其、校核
實
踐
環
節
安
排
實習
去工廠、研究所或上網進行社會調查
實驗
輪式裝載機仿真實驗
計算機應用
CAD繪圖
中、外文參考資料：
[1] 楊占敏．輪式裝載機設計[M]．北京：化學工業出版社，1982．
[2] 于碩．裝載機工作裝置的機構分析[J]. 工程機械，2001（8）：25-27
[3] 申文清．輪式裝載機工作裝置的建模及優化研究[J]. 筑路機械與施工機械化, 2006（4）:43-45
[4] 張青．工程機械概論［M］．北京：化學工業出版社，2009.
[5] 何正忠．裝載機［M］．北京：冶金工業出版社，1999.
[6]Shimoda,Masatoshi．Multiob jrctive shape optimization of linearelastic structures considering multipe loading conditions[J],material engineering,v39,n3.jul1996:407-414
[7] Hyde J M ．， Cutkosky M ．R．Controlling contact transition.
IEEE Contro1 Systems[J]，1994,14(1)：25-30
[8] Ii Z.X.，Qin Z．，Jiang S．et a1．Coordinated motion generation
and real-time grasping force control for multi-fingered manipulation. Proceedings of the IEEE Internationa1 Conference on Robotics and Automation[M]，1998，3631-3638
[
教研室主任
審批簽字
李春梅
分 院 院 長
審批簽字
劉薇娜
注：題目類別和題目性質請用符號√填在相應欄內。
長春理工大學光電信息學院學生畢業設計（論文）登記表
分院
機電工程分院
專業
機械電子工程
班級
學生姓名
指導教師
設計（論文）起止日期
教研室主任
題目名稱（包括主要技術參數）及要求：
題目名稱：輪式裝載機設計
內容：從輪胎式專用底盤為基礎車，配置在、工作裝置及其操作系統，完成裝料，行走及其、卸料工作
要求：完成工作裝置的總體設計、鏟斗、連桿。動臂，搖臂的結構設計及其、校核
技術參數：額定載重量（1.5T）、鏟斗容量（0.9m3）
行駛速度（8~~22KM/h）、掘起力（48KW）
最大牽引力（40KW）、最大爬坡能力（30°）
最小轉彎半徑——后輪（4220mm）、鏟斗(4364mm)
最大轉向角度（35°）、最大卸載高度（2500mm）
論文開題報告（設計方案論證）
應包括以下幾方面的內容：
1. 本課題研究的目的和意義
輪式裝載機是一種用途較廣的工程機械，廣泛應用于鐵路、公路、碼頭、礦山等工程建設，對于加快工程施工速度，減輕勞動強度都起到至關重要的作用。由于輪式裝載機經常工作在各種復雜的工況下，這就要求輪式裝載機具有良好的適應性和可靠性，尤其是工作裝置的各種設計參數直接影響裝載機的整機性能，因此對輪式裝載機的設計提出了嚴格的要求。因此，我們有必要研究它，輪式裝載機的設計能使我綜合運用機械制造的基本理論，綜合使用了再大學四年里所學的理論知識，并結合生產實踐中學到的技能知識，獨立的分析和解決問題，也是熟悉和運用有關手冊，圖標等技術資料及編寫技術文件的一次實踐機會，并且希望可以提高裝載機作業效率，對輪式裝載機的發展起到一個推進的作用。
2. 國內外研究現狀
我國輪式裝載機主要是20世紀70年代初期發展起來的，以ZL50型裝載機為主導產品，經過多年的發展，質量水平不斷提高，已經形成獨立的產品系列和行業門類。與工程機械其他機種相比，輪式裝載機的橋、箱、泵、閥及缸等零部件產品配套相對成熟，已經形成了比較完整的配套體系。主要生產企業有柳工、廈工、龍工、臨工、徐工、江蘇常林、成工和山工等。主要機型包括：1、3t以下裝載機：3t以下產品主要以ZL10、ZL15、ZL16為代表，還有一些利用拖拉機底盤改裝的小型裝載機，主要與日益增多的農用運輸車輛配套使用。主要零部件均采用一般性能及質量的發動機、驅動橋、變速箱、液壓件。技術較先進的靜液壓傳動產品，液壓件國內不易配套，產品成本居高不下，制約了該類產品在國內的發展。2、ZL30裝載機：ZL30裝載機主要生產廠家有成工、常林、徐工、宜工、山工等。該產品零部件配置較零亂，生產廠家具有自制的橋箱，風格各具特色，質量及性能上相對穩定，技術先進性一般。徐工最近開發的ZL30F裝載機，采用電換擋變速箱，使3t級裝載機技術上有新的突破。3、ZL40/ZL50裝載機：ZL40/ZL50裝載機，主要裝載機生產廠家均擁有該產品。第一代產品幾十年來沿續至今，全國幾乎使用同一套圖紙，有些技術力量薄弱的廠家，仍把其當作主導產品推向市場。第二、三代產品主要是對工作裝置進行優化，改變外觀造型。如柳工ZL40B/ZL50C、徐工ZL40E/ZL50E。第四代產品是在第三代的基礎上，進一步優化整機的性能及配置，電控箱、濕式制動器等新技術得到應用，并形成了各企業的專有技術及專利技術，使產品以嶄新的面目推向市場。4、ZL60及6t以上裝載機：6t以及6t以上的裝載機，這是國內潛在市場最大的產品，1998年以前大多數生產廠家均開發了ZL60裝載機，但由于受傳動件的制約，ZL60裝載機沒能成功地推向市場。在’99北京國際工程機械博覽會上，各廠家推出了新的一代ZL60裝載機，多數廠家選擇柳州ZF合資生產的箱或橋，液壓元件也有新配置，發動機可選用斯太爾或上柴6121（Cat3306），整機可靠性上得到很大提高，給國內大噸位裝載機帶來發展機遇。
我國輪式裝載機面對的主要國外對手有：美國卡特彼勒公司、日本小松公司緊隨其后，西歐是裝載機生產的第三大集團，它擁有意大利菲亞特、阿里斯、瑞典沃爾沃、德國利勃海爾、O＆K、蔡特曼、英國JCB等著名公司。目前這些工程建設機械廠商現已全面進入了中國市場，主要對6噸級以上裝載機形成壟斷地位，在中小噸位裝載機對國內不會造成很大威脅，但國外廠商正在研究中國市場的特點，開發出適合中國國情的新產品，進一步擴大其產品的市場占有率。他們的輪式裝載機技術已達到相當高的水平。信息技術的飛速發展又給裝載機技術的發展插上了奔騰的翅膀，基于微電子技術和信息技術的計算機治理系統、司機輔助操縱系統、柴油機電腦控制裝置、電子計算機監控系統、電子自動換擋變速控制系統以及網絡技術的智能系統已廣泛應用于裝載機的設計、計算操縱控制、檢測監控、生產經營和維修服務等各個方面，使國外裝載機在原來的基礎上更加“精制”；其自動化程度也得以進步，從而進一步進步了生產效率；改善了司機的作業環境，進步了作業舒適性；降低了噪聲、振動和排污量，保護自然環境；最大限度地簡化維修、降低作以本錢，使其性能、安全性、可靠性、使用壽命和操縱性能都更上了一層樓。
3.擬采取的研究路線
收集資料，調研——閱讀有關資料——撰寫開題報告——總體設計———工作裝置結構設計———設計、計算、校核——繪圖——設計說明書
4.參考文獻：
[1] 楊占敏．輪式裝載機設計[M]．北京：化學工業出版社，1982．
[2] 于碩．裝載機工作裝置的機構分析[J]. 工程機械，2001（8）：25-27
[3] 申文清．輪式裝載機工作裝置的建模及優化研究[J]. 筑路機械與施工機械化, 2006（4）:43-45
[4] 張青．工程機械概論［M］．北京：化學工業出版社，2009.
[5] 何正忠．裝載機［M］．北京：冶金工業出版社，1999.
[6] 魯東林．工程機械使用與維護［M］．北京：國防工業出版社，2008.
[7] 劉良辰．現代鏟土運輸機械［M］．北京：人民交通出版社，2003
[8] 馬文星．筑路與養護路機械：原理、結構與設計［M］．北京：化學工業出版社，2005
[9] 陳家麗．國外輪式裝載機新技術與新結構及其發展[J]．建筑機械化，2002（1）：17-19
[10] 黃靖遠．機械設計學［M］．北京：機械工業出版社，1991.
[11] 朱龍根．機械系統設計［M］．北京：機械工業出版社，1980．
[12] 加藤一郎．機械手圖冊［M］．上海：上?？萍汲霭嫔?，1979．
[13] 機械設計手冊5[M] 北京：機械工業出版社，1992．
[14]Shimoda,Masatoshi．Multiob jrctive shape optimization of linearelastic structures considering multipe loading conditions[J],material engineering,v39,n3.jul1996:407-414
[15] Hyde J M ．， Cutkosky M ．R．Controlling contact transition.
IEEE Contro1 Systems[J]，1994,14(1)：25-30
[16] Ii Z.X.，Qin Z．，Jiang S．et a1．Coordinated motion generation
and real-time grasping force control for multi-fingered manipulation. Proceedings of the IEEE Internationa1 Conference on Robotics and Automation[M]，1998，3631-3638
系統辨識與實時控制斗輪式裝載機的液壓系統土方設備
摘要
土方設備行業的迅速整裝待發，準備在近期實現數字化控制技術在其產品的快速部署的效率，性能，安全性和操作舒適巨大收益。世界上主要有兩種類型的移動設備操作的最多:挖掘機和輪式裝載機?，F(xiàn)在挖掘機已受到業界的關注。輪式裝載機產品在本文研究的是另一種高容量多功能機在配置頻譜的另一端的例子。一個先進的電液開放中心的非壓力補償閥控制系統的狀態進行了研究，以評估通過實施數字化速度伺服控制的潛在收益?？刂颇繕?biāo)是滿足運營商自覺響應要求，滿足運營商認為光滑度要求，創建一個子系統，可以接受命令弗勒曼自治區高層次的規劃控制。
數字化速度的閉環控制是成功實施的一個貨架輪式裝載機采用標準比例積分（PI）和閥的動態變換算法的議案。動態轉換閥是液壓流量功能，是一種發動機轉速和氣缸壓力桿端功能。魯棒性的性能進行了驗證，通過廣泛的系統建模，驗證，并在大卡特彼勒輪式裝載機型號的硬件測試。
簡介
汽車行業已經在效率，性能，安全性巨大收益和乘客由最近在其產品的數字化控制技術的廣泛和快速部署的舒適度。地球發展的行業正在迅速整裝待發，準備在短期內實現類似的收益。主要有兩種類型的推土設備：挖掘機和輪式裝載機。長遠目標是建立一個獨立的產品，不再操作技巧和耐力依靠最大限度地提高性能。衡量其性能的噸/小時，該材料的處理最小化的運作在成本/噸的形式加工材料成本的形式。我們的目標是開發控制子系統，改善經營人/機的性能，降低運營成本，這將作為較低級別控制子在自治區控制器的等級制度。
輪式裝載機（WTL中）有許多大小。工作重量范圍從15000-350000和馬力馬力范圍從100-1200。小到中型機器的應用程序（例如，施工和材料處理應用）最廣泛而較大的機器往往是用于礦山的應用為主。 WTL的一個常見的功能是利用卡車裝載?？ㄜ囇b載周期是一個重復的四個步驟，其中一些類型的材料是從股票樁運到卡車上。這個過程開始時，運營商的股票樁公羊和命令的聯系，以提升負載，而在同一時間向后搖桶（步驟1：旅行，股票樁和挖）。當水桶已滿載，逆向操作的變化和旅行轉向時向后一個位置，使他有足夠的空間，然后轉移到前進，前往卡車。經營者繼續這次旅行期間提出的部分，以便它清除車床上時，他減慢，達到卡車（步驟2：前往卡車）負載。運轉員接著命令桶傾倒從而釋放負載到卡車床（步驟3：轉儲）。最后，操作命令把水桶架回其水平位置。同時，旅游經營者進入反向變化和命令的聯系，以降低再挖周期（步驟4：行程開始位置）返回地面。
本研究的重點是數字化速度的閉環控制的執行情況在執行子一個先進的輪式裝載機移動設備的接地電流狀態系統。這項技術的應用不僅限于WTL以及實際上已經到了地球的各種移動設備的廣泛應用。挖掘機
液壓子系統的控制問題已引起廣泛關注最近有液壓子在一般系統。
描述輪式裝載機的子系統
土方設備可細分為4個子系統。（1）動力裝置，（2）制動系統，（三）工作裝置，（4）液壓傳動器。上電列車由一個電源，通常是一個柴油發動機。電力傳輸?shù)揭环N通過液力變矩器然后連接到差距機械傳動，驅動器和最后輪胎。這通常是對WTL案件。挖掘機有水文靜態驅動列車（即，液壓泵和馬達）連接到一個軌道。幾個發動機功率起飛通過泵提供動力轉向液壓系統運行，制動系統是典型的液壓\和液壓執行系統。該液壓驅動系統包含地面從事工具，提供了力量和運動，從事土壤或其他材料需要處理。
2.1．自由車度
出租車經營者被認為有六個自由度：三線性（前，后部，橫向，縱向）和三個角（偏航，俯仰，roll0。鏟斗有兩個自由度。督導是一種額外的自由程度。因此，車輛有著9年的自由程度。為了簡化即將舉行的分析，兩
限制將在系統規定。首先，前幀運動不會允許旋轉相對于后車架。第二，后車架議案將限制在一個平面上。第一個約束消除了單自由度（轉向）學位從分析中。第二個約束消除了三自由度：運營商橫向直線運動，偏航角和滾動角運動的議案。因此，我們認為只有五個自由度在我們的模型：電梯和傾斜落實桶議案和操作前，尾部和垂直直線運動和俯仰角的議案。
2.2. 連鎖
有幾種類型的WTL的實現使用目前的聯系。一個非常普遍的例如，所謂的Z型連桿。它是自由的兩個學位四體聯動（提升臂，杠桿，鏈接，桶）和兩個組成的非對稱液壓缸（升降機及傾斜），由九個旋轉腳關節連在一起。
2.3. 主要液壓系統
一個普通液壓系統通常用來實現控制流量的電梯WTL的傾斜和一缸采用開放中心非壓力補償閥芯型閥。這個系統包含一個水泵/釋壓閥的流體傳送到主
換向閥從而分區到液壓缸和坦克流。
組件和它們的運作是最好的形容按照液壓流體通過各種運行條件下的電路。最簡單的條件是在沒有命令從流腦放大器電流。該電梯線軸和傾斜，因?yàn)閷⒓性贓/小時閥電磁鐵將不會被激活。在這種情況下，通過發送泵單向閥的負載流量（最大操作設置壓力）的傾斜閥芯。由于這閥芯為中心，流動收益上的電梯閥芯，這也是為中心，返回循環水箱。命名為“開放中心“的事實，即當閥門在中立的立場來，流體循環從通過到罐的閥門泵。
如果傾斜閥芯中心\及電梯閥芯右移，一開口就罐區稱為泵罐區（星期三）而受到限制。泵的壓力建立起來，克服了負載止回閥發送流向頭端（HE）的對在另一口的升降油缸稱為至氣缸區（PC）的泵。在同時，流體從桿端（重新）電梯在另一口缸流量所謂的氣缸罐區（CT）和再循環，再進行坦克。因此，
電梯活塞桿延伸提高一個可能在桶中的負載。如果電梯閥芯左移相反的情況。從他流體流經對坦克的CT，從泵流體流動以及整個閥芯如果沒有足夠的轉移完全關閉的PT太平洋橫跨可再生能源的電腦。因此，電梯活塞桿縮回桶降低到地面。如果電梯閥芯居中和傾斜閥芯被激活時，傾斜油缸的行為類似于電梯缸。
在WTL車輛，電梯管道與閥芯系列傾斜。此配置被稱為傾斜優先事項，因?yàn)殡娐返膬A斜流量需求可以通過預約和關閉電梯電路。此外，氣缸安全閥可能被添加到每個RE和他如果每個部分各不相同的最高工作壓力的主要救濟
結構壽命或安全的關注?；瘖y閥往添加到這些系統很好。這些止回閥提供缸罐流向稀土在事件或作真空操作過程中創建。這樣，空化可以顯著減少。這是如電梯武裝以重力驅動的功能降低或問題桶中的CT傾倒區已設計提供限制產量快速缸速度。在這種情況下，泵的流量與氣缸無法比擬從氣缸流向低壓槽和空化創造。這是非常以來的液壓系統可控的閉環控制是不可取空蝕過程中有效地失去了。
2.4. 電液壓先導
一個先導泵供應流到壓力調節閥，它維護一個穩定供應的壓力，一個E/小時閥這也是連接到油箱。細胞外基質中的驅動程序發送到電磁鐵電流其中移動一個控制閥芯。由于這閥芯移動，一米的連接口供應壓力端口和一個節流孔連接到油箱比例開放保持或接近控制壓力。這種壓力作用在主閥芯造成它移位，打開主孔區（即，電腦斷層，鉑，電腦）。在某些情況下，位置主閥芯是用來提供反饋閉環位置控制閥芯。
2.5．?dāng)?shù)字化控制系統
基本低成本的組件將被選為這項研究將與一致目前的做法在這個行業。通常情況下，7位微處理器，其中使用大會編碼須達到20毫秒循環時間。旋轉式電位器用于傳感器反饋以及參考輸入信號。
3） 動態模式：平面傾斜和車輛動態電路
傾斜的動態電路模型，從投入產出關系點的觀點。輸入是傾斜電路閥芯的位置。的輸出是：（1）由于角速度斗缸位移傾斜，（2）平面運動（X,?，θ）的車輛。
下面的假設和近似作出的模型：
（1）電梯電路以象征式升降機固定角度。因此，我們期望獲得不同面值不同傾斜位置電梯電路電路模型。
（2）車輛被建模為一個在二維空間質量彈簧阻尼器系統，有三個自由度：的x，y，美國這是一個相當不錯的，因?yàn)檐嚿肀平洼喬ハ褚粋€(gè)大眾彈簧阻尼系統。（3）軟管量和水力損失包括在水力模型。
（4）電液閥是一個二階濾波器，包括動態0.707阻尼比。這是符合實際的英/ H閥使用行為是一致的在WTL車輛。
（5）電子/小時閥芯區（稱為計量）不是閥芯位置的線性函數。閥芯面積幾何精確建模為非線性函數的閥芯位置。
（6）標準孔板方程來描述流程之間的關系率（Q）和閥芯位置（因此測光區域），壓差時，ΔP。
（7）靈活性，由于石油是考慮到壓縮為體積模量液壓油。閥芯位置之間的水桶和角速度的輸入輸出關系
獲得三個逼近階段：
（1）穩態之間的閥芯位移和傾斜缸輸入輸出功能傾斜速度被稱為調制。該模型的非線性靜態捕捉死區的幾何關系，包括與閥門缸增益。請注意有效的死區和增益是（1）流量的功能（這是一個功能發動機轉速在WTL的情況），和（2）外部負載。換句話說，直流增益?zhèn)鬟f函數是一個流量，外部負載的非線性函數，名義電梯電路的位置。
（2）線速度之間的傾斜缸和鏟斗幾何線性關系速度是描述聯動雅可比。這是表示為一系列針對不同的電梯位置曲線（插表作為實時實現的）。
（3）最后，我們從后臺處理模型的液壓電路的動態過濾效果位置傾斜缸速度。穩態增益在獲取信息的調制和傾斜傾斜運動學模型。因此，在特區動態模型的傾斜收益將約為團結（0分貝）。此外，這將是電梯的位置和外部負載的函數。因此，所有三個模型塊組件方面的評估，預計全掃一電梯的位置和負載值。é/小時閥是一個開放的中心型閥。由于閥芯命令轉變的閥芯，鉑（泵罐）區開始關閉，電腦（泵缸）面積開始打開一樣的C- T的（缸罐）區。泵的壓力開始建立自的P- T是限制其流動油箱。當泵的壓力超過了何氣缸壓力，負載單向閥泵的流量持久性有機污染物允許進入氣缸他說。這種流動延伸圓柱的部隊從各地稀土流缸在C - T區油箱。由于外部負載變化時，閥芯的最低金額需要匹配通過泵壓變化，以及不同加載命令。這結果有效的死區和增益變化。如果外部負載相反（即超過運行負荷狀態），延長了氣缸率將主要取決于除兩端的壓降壓降的CT區的CT是這樣的：流量比泵進入氣缸的何流更少。接著率將延長泵驅動。
（4）閉環控制系統的性能目標
液壓系統元件（泵，油缸，伺服閥）的大小，以便它們能提供必要的功率級（流量和壓力）為移動的WTL是設計用來處理負載范圍內桶。在這里，我們將不再重復液壓控制系統元件尺寸分析，但是，我只想說這它們大小，以滿足下列議案的電源要求：電梯電路在全面提高10秒，電梯的電路全部在3.5降低，傾斜在4.0的電路全機架，傾斜電路充分潮濕條件下，最大負荷2.5秒。最大負載能力是斗1.2錳。
（5）結果：仿真和實驗
該實驗?zāi)Ｐ蜕线M(jìn)行了卡特彼勒WTL的889種類的車輛。為傾斜電路的控制算法實現用微型控制器，對船上的8位分辨率的A / D，D / A轉換。有效的死區是負載和發動機轉速的功能。在實時實現不同低估死區值使用，以避免過沖。不準確的死區補償?shù)捻憫?yīng)是在Fig.14.It顯示延時效果觀察到，在響應時間減少到低于0.2的時候賠償范圍內，其實際有效價值1.0毫米的。圖15顯示了上升時間敏感閥改造的收益。據觀察，為了滿足時間要求提高0.5秒的增益必須相當準確。圖16shows一兩個實驗和分析比較下一個完整的電梯，完全轉儲，無負荷，高怠速架步反應的條件。造成這種狀況的性能標準的0.5秒和5％上升時間小于0.2秒的延遲就形成一個關心過沖閥變換的動態執行中遇到的壓力是再反饋級過濾反應所需的穩定。據推測，壓力應低通濾波在或低于閉環系統帶寬，以一個臨界值。在這樣的閉環控制能夠響應增益的變化，就好像他們是死區對系統干擾。實驗和分析都反映了這種過濾。雖然沒有顯示，在穩定性上WTL的模型進行的實驗都保持990.Therefore，這樣一種高血壓控制用PI型制度的有效控制閉環控制加閥變換模型為基礎的補償要求非常精確的模型。
(6) 總結
一個先進的電液開放為中心的非壓力補償?shù)膶?shí)現系統狀態進行了研究，以評估執行速度伺服控制，同時滿足運營商的響應和平滑性能規格的潛力，并建立一個模塊化的子系統，將接受從命令自治區高層次上的WTL的車輛規劃控制器。閉環速度控制成功地實施了傾斜電路貨架使用標準的比例積分控制器，具有動態轉換閥偶函數。閥的動態變換是發動機轉速（液壓流量）和桿端氣缸壓力的作用。閥門共享的動態變換在實時控制算法提供的自由化效果類似壓力補償?shù)呢?fù)荷傳感液壓系統和元件成本降低的結果。強大的性能進行了驗證，通過廣泛的系統建模與一個 WTL model990車試驗。
Modeling identification and real time control of bucket hydraulic system for a wheel type loader earth moving equipment
Abstract
The earth moving equipment industry is quickly gearing up to achieve great gains in efficiency, performance, safety, and operator comfort by the rapid deployment of recent digital control technology in its products.There are two major types of earth moving equipment operating in large numbers: excavators and wheel type loaders. Excavators have received much attention by the industry recently. The wheel type loader product studied in this paper is another example of a high volume versatile machine at the opposite end of the configuration spectrum.A state of the art electro-hydraulic open centered non-pressure compensated valve control system is studied to evaluate the potential gains by implementing digital velocity servo control. The control objectives are to meet operator perceived response requirements, meet operator perceived smoothness requirements, create a sub-system that could accept commands froman autonomous high level planning controller.
Closed loop digital velocity control is successfully implemented in the racking motion of a wheel loader using a standard proportional-integral (PI) and a dynamic valve transform algorithm. The dynamic valve transform is a function of hydraulic flow rate which is a function of engine speed and rod end cylinder pressure. Robustness of performance was verified through extensive system modeling, validation, and hardware tests on a large Caterpillar wheel loader model.
Introduction
The automotive industry has made great gains in efficiency, performance, safety
and passenger comfort by the extensive and rapid deployment of the recent digital control technologies in its products. The earth moving industry is quickly gearing up to achieve similar gains in the short term. There are two major types of earth moving equipment: excavators and wheel type loader . The long term goal is to develop an autonomous product that no longer relies on the operator skill and endurance to maximize performance. The performance is measured in the form of tons/h of the material processed and minimizing the cost of the operation in the form of cost/ton of material processed. The goal is to develop controlled sub-systems that improve operator/machine performance, reduce operation cost, and that would serve as lower level control sub-system in the autonomous controller hierarchy.
Wheel type loaders (WTL) come in many sizes. Operating weight ranges from 15000-350000ib and horsepower ranges from 100-1200 hp. The small to mid-size machines have the broadest spectrum of applications (e.g., construction and material handling applications) while the larger machines tend to be used mostly in mining applications. One common function WTL are utilized for is truck loading.
The truck loading cycle is a repetitive four step process by which some type of material is transported from a stock pile to a truck. The process starts when the operator rams the stock pile and commands the linkage to lift load while at the same time the bucket is racked backwards (step 1: travel, to stock pile and dig).When the bucket has a full load, the operator shifts into reverse and travels backwards while steering to a position that allows him enough room to then shift into forward and travel to the truck. The operator continues to raise the load during this travel portion so that it clears the truck bed when he slows down and reaches the truck (step 2: travel to truck). The operator then commands the bucket to dump thus releasing the load to the truck bed (step 3: dump). Finally, the operator commands the bucket to rack back to its level position. At the same time, the operator shifts into reverse travel and commands the linkage to lower back to the ground for another dig cycle (step 4:travel to start position). This study focuses on the implementation of closed loop digital velocity control on the implement sub-system of a current state of the art wheel type loader earth moving equipment. The application of this technology is not limited to WTL and in fact has broad applications to a variety of earth moving equipment .The excavator hydraulic sub-system control problem has received much attention recently as have hydraulic sub-systems in general.
Description of the wheel type loader sub-system
Earth moving equipment can be broken down into four sub-systems. (1) power-train,(2) brakes,(3) steering, and (4) hydraulic actuators. The power-train consists of a power source which is typically a diesel engine. Power is transmitted to a mechanical transmission via a torque converter which then connects to differentials, drives and finally tires. This is typically the case for WTL. Excavators have a hydro-static drive train (i.e., hydraulic pumps and motors) that connects to a track. Several engine power take-offs provide power via pumps to run the steering hydraulic system, the brake system which is typically hydraulic，and the hydraulic actuator system. The hydraulic actuation system contains the ground engaging tool that provides the force and motion to engage the soil or other material that needs to be processed.
2.1. Vehicle degrees of freedom
The operator cab is considered to have six degrees of freedom: three linear (fore-aft, lateral, vertical) and three angular (yaw, pitch, roll). The bucket has two degrees of freedom. Steering is one additional degree of freedom. Therefore, the vehicle has nine degrees of freedom. To simplify the upcoming analysis, two constrains will be imposed on the system. First, the front frame motion will not be allowed to rotate relative to the rear frame. Second, the rear frame motion will be constrained to a plane. The First constraint eliminates one degree of freedom (steering) from the analysis. The second constraint eliminates three degrees of freedom: operator lateral linear motion, yaw angular motion and roll angular motion. Thus, we consider only five degrees of freedom in our model: lift and tilt implement motion of the bucket and operator fore-aft and vertical linear motion and pitch angular motion.
2.2. Linkage
There are several types of WTL implement linkages currently in use. A very common example, called the Z-bar linkage. It is a two degrees of freedom linkage consisting of four bodies (lift arm, lever, link, bucket) and two asymmetric hydraulic cylinders (lift and tilt), all connected together by nine revolute pin joints.
2.3. Main hydraulics
A common hydraulic implement system often used to control the flow to the lift and tilt cylinders of a WTL uses the open center non-pressure compensated spool type valve. This system contains a pump/relief valve which sends fluid to a main directional valve which in turn partitions the flow to hydraulic cylinders and tank.
The components and their operation are best described by following the hydraulic fluid through the circuit under various operating conditions. The simplest condition is when there is no command current from the ECM amplifiers. The lift and tilt spools will be centered since the E/H valve solenoids will not be activated. In this case, the pump sends flow across a load check valve (set at maximum operating pressure) to the tilt spool. Since this spool is centered, the flow proceeds on to the lift spool, which is also centered, and back to tank for recirculation. The name "open center" comes from the fact that when valve is in neutral position, fluid circulates from the pump through the valve to the tank.
If the tilt spool is centered\ and the lift spool is shifted to the right, an orifice to tank area called the pump to tank area (P-T) becomes restricted. The pump pressure builds up and overcomes the load check valve sending flow to the head end (HE) of the lift cylinder across another orifice called the pump to cylinder area (P-C). At the same time, fluid from the rod end (RE) of the lift cylinder flows across another orifice called the cylinder to tank area (C-T) and on to tank for recirculation. As a result, the lift cylinder rod extends raising a load that may be contained in the bucket. If the lift spool is shifted to the left the opposite happens. Fluid from the HE flows across the C-T to tank, fluid from the pump flows across the P-C to the RE as well as across the P-T if the spool is not shifted enough to completely close the P-T. As a result, the lift cylinder rod retracts lowering the bucket to the ground. If the lift spool is centered and the tilt spool is activated, the tilt cylinder will behave similar to the lift cylinder.
In WTL vehicles, the lift spool is piped in series with the tilt spool. This configuration is called tilt priority, since the flow requirement of tilt circuit can over-ride and shut off the lift circuit. Additionally, cylinder relief valves may be added to each RE and HE if the maximum operating pressures for each section varies from main relief for structural life or safety concerns. Make-up valves are often added to these systems as well. These check valves provide tank flow to the cylinder RE or HE in the event that a vacuum is created during operation. In this way, cavitation can be significantly reduced. This is a problem for gravity driven functions such as lift arm lower or bucket dump in which the C-T area has been designed to provide restrictions that yield fast cylinder velocities. In this case, the pump flow to the cylinder can not match the flow from cylinder to tank creating low pressures and cavitation. This is highly undesirable in closed loop control since controllability of the hydraulic system is effectively lost during cavitation.
2.4. Electro Hydraulic pilot valve
A pilot pump supplies flow to a pressure regulation valve that maintains a constant supply pressure to an E/H valve which is also connected to tank. A driver in the ECM sends a current to the solenoid which moves a control spool. As this spool moves, a meter-in orifice connected to the supply pressure port and a meter-out orifice connected to tank proportionally open or close to maintain a control pressure. This pressure acts on the main spool causingit to shift and open the main orifice area (i.e., C-T, P-T, P-C). In some cases, position feedback of the main spool is used to provide closed loop position control of the spool.
2.5. Digital control system
Basic low cost components will be chosen for this study to be consistent with the current practice in this industry. Typically, 7-bit microprocessors are used in which assembly coding is required to achieve loop times of 20 ms. Rotary potentiometers are used for sensor feedback as well as reference input signals.
Dynamic model: tilt circuit and vehicle planar dynamics
Dynamic model of the tilt circuit is developed from an input-output relations point of view. The input is the spool position of the tilt circuit valve. The outputs are (1)bucket angular velocity due to tilt cylinder displacement, and (2) planar motion (x, y, θ）of the vehicle.
The following assumptions and approximations are made for the model:
(1) Lift circuit is stationary at a nominal lift angle. Therefore, we expect to obtain different tilt circuit models for different nominal lift circuit positions.
(2) Vehicle is modeled as a mass-spring-damper system in 2-D space which has three degrees of freedom: x, y, u. This is a fairly good approximation since vehicle body and tires act like a mass-spring-damper system.
(3) Hose volume and hydraulic losses are included in the hydraulic model.
(4) Electro-hydraulic valve dynamics is included as a second order filter with 0.707 damping ratio. This is consistent with the behavior of the actual E/H valves used in WTL vehicles.
(5) E/H valve spool areas (called metering) are not linear functions of spool positions.
The spool area geometry is accurately modeled as a nonlinear function of spool position.
(6) Standard orifice equations are used to describe the relationship between the flow rate (Q) and the spool position (hence the metering area), and pressure differential, Δ p
(7) Flexibility due to the oil compressibility is taken into account as bulk modulus of the hydraulic fluid.
The input-output relationship between spool position and bucket angular velocity is obtained in three stages of approximation:
(1) Steady state input-output function between spool displacement and tilt cylinder velocity is called the tilt modulation. This model captures the nonlinear static relation including the geometric dead band and valve-cylinder gain. Notice that effective deadband and gain are functions of (1) flow rate (which is a function of engine speed in WTL case), and (2) external load. In other words, the DC gain of the transfer function is a nonlinear function of the flow rate, external load, and nominal lift circuit position.
(2) The geometric relation between tilt cylinder linear velocity and bucket linear velocity is described by the linkage jacobian. This is represented as a series of curves (implemented in real time as interpolated table) for different lift positions.
(3) Finally, we model the dynamic filtering effect of the hydraulic circuit from spool position to tilt cylinder velocity .The steady state gain information is captured in tilt modulation and tilt kinematic models. Therefore the d.c. gain of the tilt dynamic model will be approximately unity (0 dB). Furthermore, it will be function of lift position and external load. Therefore, all three block components of the model are evaluated for a full sweep of expected lift position and load values. E/H valve is an open-center type valve. As the spool command shifts the spool, the P-T (pump to tank) area starts to close, the P-C (pump to cylinder) area starts to open as does the C-T (cylinder to tank) area. The pump pressure starts to build up since the P-T is restricting its flow to tank. When the pump pressure exceeds the HE cylinder pressure, the load check valve pops allowing pump flow to enter the cylinder HE. This flow extends the cylinder which forces flow from the RE of cylinder across the C-T area to tank. As the external load varies, the minimum amount of spool command required to match the load via varying pump pressure varies as well. This results in effective deadband and gain changes. If the external load is reversed (i.e., over running load condition), the rate of cylinder extension will be primarily determined by the pressure drop across the C-T area unless the pressure drop is such that the C-T flow is less than the pump flow entering the HE of the cylinder. Then the rate of extension will be pump driven.
(4) Closed loop control system performance objectives
The hydraulic system components (pumps, cylinders, servo valves) were sized so that they can provide the necessary power levels (flow rate and pressure) to move the bucket for the range of loads the WTL is designed to handle. Here we will not repeat the hydraulic control system component sizing analysis, however, suffice it to say that they were sized to meet the power requirements for the following motions: lift circuit full raise in 10 s, lift circuit full lowering in 3.5 s, tilt circuit full rack in 4.0 s, tilt circuit full damp in 2.5s under maximum load condition. Maximum bucket load capacity is 1.2 MN.
(5)Results: simulations and experiments
The experiments were conducted on a Caterpillar model WTL 889 class vehicle. The control algorithm for the tilt circuit was implemented using a micro-controller which has 8-bit resolution A/D, D/A converters on board. Effective deadband is a function of load and engine speed. In real-time implementation different under-estimated deadband values were used in order to avoid overshoots. The effect of inaccurate deadband compensation on the delay of the response is shown in Fig.14.It is observed that the delay in response reduces to below 0.2 s when deadban compensation is within 1.0mm of its actual effective value. Figure 15 shows the rise time sensitivity to valve transform gains. It is observed that in order to meet the 0.5 s raise time requirement the gain must be fairly accurate. Figure 16shows a comparison step response for both experiment and analysis under the conditions of a full lift, full dump, no load, high idle rack. The performance criteria for this situation are met in the form of 0.5s rise time and 5%overshoot with less than 0.2s delay A concern regarding implementation of the dynamic valve transform is the level of RE pressure feedback filtering required for stable response. It was postulated that the pressure should be low pass filtered to a cutoff value at or below the bandwidth of the closed loop system. In this way the closed loop control could respond to the changes in gain and deadband as if they were disturbances on the system. Both experiment and analysis reflect this filtering. Though not shown, stability was maintained during all of the experiments conducted on WTL model 990.Therefore, the effective control of such an EH control system using a PI type closed loop control plus model based valve transform compensation requires very accurate models.
Conclusions
A state of the art electro hydraulic open centered non-pressure compensated implement system was studied to evaluate the potential of implementing velocity servo control to meet both operator response and smoothness performance specifications, and to create a modular sub-system that would accept commands from an autonomous high level planning controller on a WTL vehicle. Closed loop velocity control was successfully implemented on the racking function of the tilt circuit using a standard proportional-integral controller coupled with a dynamic valve transform. The dynamic valve transform is a function of engine speed (hydraulic flow) and rod end cylinder pressure. Inclusion of the dynamic valve transform in real-time control algorithm provides the liberalizing effect similar to a pressure compensated load sensing hydraulic system and results in lower component cost. Robust performance was verified through extensive system modeling and tests on aWTLmodel990 vehicle.