插座零件塑料注塑模具設計
插座零件塑料注塑模具設計,插座,零件,塑料,注塑,模具設計
畢業設計(論文)開題報告
題目:插座零件塑料注塑模具設計
系 別 機電信息系
專 業 機械設計制造及其自動化
班 級
姓 名
學 號
導 師
2012年 12 月 26 日
1、 畢業設計(論文)綜述(題目背景、研究意義及國內外相關研究情況)
1.1塑料注射模具的背景
塑料注射模具是成型塑料制件的一種重要工藝裝備,在塑料制品的生產中起著關鍵的作用。塑料模具工業從起步到現在,歷經半個世紀,有了很大發展,模具水平有了較大提高。成型工藝方面,多材質塑料成型模、高效多色注射模、鑲件互換結構和抽芯脫模機構的創新設計方面也取得較大進展。氣體輔助注射成型技術的使用更趨成熟,如青島海信模具有限公司、天津通信廣播公司模具廠家在29—34英寸電視機外殼以及一些厚壁零件的模具上運用氣輔技術,一些廠家還使用了C-MOLD氣輔軟件,取得較好的效果。如上海新普雷斯等公司就能為用戶提供氣輔成型設備及技術。
整體來看,中國塑料模具無論是在數量上,還是在質量上、技術和能力等方面都有了很大的進步,但是與國民經濟發展的需求、世界先進水平相比,差距仍很大。一些大型、復雜、長壽命的中高檔塑料模具每年仍需大量進口。在總量供不應求的同時,一些低檔塑料模具確供過于求,市場競爭激烈,還有一些技術含量不太高的中高檔塑料模具也有供過于求的趨勢。
1.2塑料注射模具的國際意思
加入WTO,給塑料模具產業帶來了巨大的挑戰,同時帶來更多的機會,由于中國塑料模具以中低檔產品為主,產品價格優勢明顯,有些甚至只有國外價格的1∕5——1∕3。加入WTO后,國外同類產品對國內沖擊不大,而中國中低檔模具的出口量則加大;在高精模具方面,加入WTO前本來就主要依靠進口,加入WTO后,不僅為高精尖產品的進口帶來了更多的便利,同時還促使更多外資來中國建廠,帶來國外先進的模具技術和管理經驗,對培養中國的專業模具人才起到了推動作。
雖然 近幾年模具出口增幅大于進口增幅,但所增加絕對量仍是進口大于出口,至使模具外貿逆差逐年增大。這一狀況在2006年已得到改善,逆差略有減少。模具外貿逆差增大主要有兩方面原因:一是國民經濟持續高速發展,特別是汽車產業的高速發展帶來了對模具的旺盛需求,有些高檔模具國內實在生產不了,只好進口;但確實也有一些模具國內可以生產,也可以進口。這與中國現行的關稅政策及項目審批制度有關。二是對模具出口鼓勵不夠?,F(xiàn)在模具與其它機電產品一樣,出口退稅率只有13%,而未達17%。
1.3塑料注射模具的國內情況
從市場情況來看,塑料模具生產企業應重點發展那些技術含量高的大型、精密、復雜、壽命高的模具,并大力開發國際市場,發展出口模具。隨著中國塑料工業,特別是工程塑料的高速發展,可以預見,中國塑料模具的發展速度仍將繼續高于模具工業的整體發展速度,未來幾年年增長率仍將保持20%左右的水平。
近年來,港資、臺資、外資在中國大陸發展迅速,這些企業中大量自產自用塑料模具無確切的統計資料,因此未能進入上述統計之中。
1.4塑料注射模具的研究意義
在科技發展中,人是第一要素,因此我們特別注意人才的培養,實現產、學、研相結合,培養更多的模具人才,搞好技術創新,,提高模具設計制造水平。在制造中積極采用多媒體與虛擬現實技術,逐步走向網絡化、智能化環境,實現模具企業的敏捷制造、動態聯盟與系統集成。我國模具工業一個完全信息化的、充滿著朝氣和希望而又實實在在的新時代即將到來。
2、本課題研究的主要內容和擬采用的研究方案、研究方法或措施
本次設計的零件如下圖2.1所示:
2.1 零件圖
2.1研究內容:塑件基本尺寸的計算和注射機的選用、模具類型及結構的確定、模具結構草圖的繪制、模具與成型機械關系的校核、模具零件的必要計算、繪制模具裝配圖、繪制模具零件工作圖;分型面的選擇,導向機構的設計,推出機構的設計等。設計方案的擬定主要包括:(1)確定成型方法;(2)確定模具類型及型腔數;(3)型腔數;(3)型腔的布置;(4)選擇注射機的規格;(5)確定分型面;(6)確定澆注系統和排氣系統;(7)選擇頂出方式及抽芯機構;(8)確定拉料桿的形式;(9)確定加熱與冷卻系統;(10)確定成型零件和結構零件形式等。
設計計算。包括:成型零件的工作尺寸及公查;成型型腔的壁厚;型芯墊板厚度。模具典型零件的選材及熱處理工藝路線分析。
對設計方案和設計結果進行三維剖析,作出模具開合結構圖。
其中澆注口是澆注系統中塑料進入型腔前的關鍵部分。澆口按形式和大小分:①直接澆口;②側澆口;③點澆口;④護耳式澆口;每一種都有起各自的優缺點。本次設計給定的塑件為薄壁零件,選擇點澆口,其優點是去除澆口后,制品上留下的痕跡不明顯,開模后可自動拉斷,成型時可減少熔接痕,能夠保證表面光滑,精度也有一定的保證。
2.2研究方案、研究方法或措施:
(1) 經過測量和計算,用Pro/E軟件畫出塑件的三維圖,如下圖2.2(a),(b)
(a) (b)
2.2圖件三維圖
(2) 用Pro/E軟件設計出插座的注塑模,再利用Pro/E或AUTOCAD軟件模架構建,結合設計、計算的注塑模的主要尺寸,調用標準模架,完成插座整套模具的設計。
(3) 用Pro/E等設計軟件,結合文字說明、圖片等方法詳細說明插座注塑模具的設計過程。
(4)總結以上成果,寫出整個畢業設計的說明書。
3、本課題研究的重點及難點,前期已開展工作
(1) 選擇注塑機的類型。
(2)型腔布置,根據塑件的幾何結構特點、尺寸精度要求、批量大小、模具制造難以、模具成本等確定型腔數量和排列方式。
(2)確定分型面。分型面的位置要有利于模具加工、排氣、脫模及成型操作,塑料制件的表面質量等。
(3)確定澆注系統(主澆道、分澆道及澆口的形狀、位置、大?。┖团艢庀到y(tǒng)(排氣的方法、排氣槽位置、大小)。
(4)選擇頂出方式(頂干、頂管、推板、組合式頂出),決定側凹處理方法、抽芯方式。
(5)確定冷卻、加熱方式及加熱冷卻溝槽的形狀、位置、加熱元件的安裝部位。
(5)根據模具材料、強度計算或者經驗數據,確定模具零件厚度及其外形尺寸,外形結構及所有連接、定位、導向件位置。
(6)確定主要成型零件,結構件的結構方式。
(7)考慮模具各部分的強度,計算成型零件工作尺寸。
4、完成本課題的工作方案及進度計劃(按周次填寫)
對塑件進行工藝分析,完成有關零件圖,初步擬定設計方案,對設計方案行
確定,并進行經濟分析和環保分析。最終對模具結構進行三維剖析,用Pro/E進行虛擬裝配,完成模具的開合結構圖。
進度計劃:
1)1-4周,下達任務書,收集資料,撰寫開題報告;
2)5-6周,對給定的塑料進行測繪,繪出零件圖;
3)7-8周,完成方案設計、裝配圖設計,完成外文翻譯、撰寫中期報告,準
備中期答辯;
4)9-13周,完成全部零件設計,并對模具進行三維解剖,制作出模具開合結
構圖;
5)14周,撰寫畢業設計論文;
6)15周,整理資料,準備答辯。
5 指導教師意見(對課題的深度、廣度及工作量的意見)
指導教師: 年 月 日
6 所在系審查意見:
系主管領導: 年 月 日
參考文獻
[1] 曹宏深,趙仲治主編.塑料成型工藝與模具設計.北京:機械工業出版社,1993.
[2] 馬金俊編著.塑料模具設計.中國科學技術出版(第2版),1994.
[3] 張克惠編著.注塑模設計.西安:西北工業大學出版社,1995.
[4] 丁浩主編.塑料工業實用手冊.北京:化學工業出版社,1995.
[5] 模具實用技術叢書編委會編.塑料模具設計與應用實例(第2版).北京:機械工業出版社,2009 11.
[6] 付宏生主編.塑料制品與塑料模具設計.北京:化學工業出版社,2007.
[7] 付宏生主編.塑料成型模具.北京:化學工業出版社,2006.
[8] 葉久新 王群主編.塑料成型工藝及模具設計.北京:機械工業出版社,2007.
[9] 濮良貴,紀名剛主編.機械設計7版. 北京:高等教育出版社,2001.
[10] 成大先.機械設計手冊.4版.北京:化學工業出版社,2002.
[11] 鄒慧君主編.機構系統設計.上海:上??茖W技術出版社,1996.
[12] 藤森洋三.機構設計實用構思圖冊.賀相,譯.北京:機械工業出版社,1990.
[13] 劉鴻文主編.材料力學1.北京:高等教育出版社.
[14] 大連理工大學工程圖學教研室 編.機械制圖(第6版).北京:高等教育社,2007,7.
[15] 劉朝儒,等.機械制圖.北京:高等教育出版社,2001.
[16] stic Composite Prototypes: A Materials Alternative for Recycling Plastic and Glass Waste. Volume 5, Number 3 ,159-169
[17] M. Heckele,W.BACHER,K.D. Müller, Springer Berlin / Heidelberg.Hot embossing-Thee molding technique for plastic microstructures. Volume 4, Number 3 ,122-124
[18 ] Coulter S. L.Bras B.A. Rosen D. W. Formulating and solving parametric design problems involving non-interference con straints.Engineering with Computers, Springer-Verlag New York Inc. 1997, 13 (2):112-124
temperature Pujos Cedex great molding numer cooling is to effect and quality fastest lar industrie increase well known economically mer melt sufficiently so that the part can be ejected without any significant deformation 2 An efficient cooling system design of the cooling channels aiming at reducing cycle time must minimize such undesired defects as sink marks differential shrinkage ther mal residual stress built up and part warpage During the post fill ing and cooling stages of injection molding hot molten polymer touches the cold mold wall and a solid layer forms on the wall tion to the coolant moving through the cooling channels and by natural convection to the air around the exterior mold surface The coolant is flowing through the channels at a given flow rate and a given temperature which is considered constant throughout the length of the channel In this work time dependent two dimensional model is considered which consists of an entire computational domain of the cavity mold and cooling channel surfaces The cyclic transient temperature distribution of the mold and polymer T shape can be obtained by solving the transient energy equation Corresponding author Tel 330540006348 fax 330540002731 Applied Thermal Engineering 29 2009 1786 1791 Contents lists available E mail address hassan enscpb fr H Hassan cess where polymer is injected into a mould cavity and solidifies to form a plastic part There are three significant stages in each cy cle The first stage is filling the cavity with melt hot polymer at an injection temperature filling and post filling stage It is followed by taking away the heat of the polymer to the cooling channels cooling stage finally the solidified part is ejected ejection stage The cooling stage is of the greatest importance because it signifi cantly affects the productivity and the quality of the final product It is well known that more than seventy percent of the cycle time in the injection molding process is spent in cooling the hot poly distribution of the mold and polymer therefore their effect on the solidification degree of that polymer A fully transient mold cooling analysis is performed using the finite volume method for a T shape plastic mold with similar dimensions to 5 as shown in Fig 1 Different cooling channels positions and forms are studied 2 Mathematical model The heat of the molten polymer is taken away by forced convec 1 Introduction Plastic industry is one of the world s ranked as one of the few billion dol injection molded parts continues to plastic injection molding process is cient manufacturing techniques for precision plastic parts with various shapes at low cost 1 The plastic injection molding 1359 4311 see front matter C211 2008 Elsevier Ltd All doi 10 1016 j applthermaleng 2008 08 011 growing industries s Demand for every year because as the most effi producing of and complex geometry process is a cyclic pro As the material cools down the solid skin begins to grow with increasing time as the cooling continues until the entire material solidifies Over the years many studies on the problem of the opti mization of the cooling system layout in injection molding and phase change of molding process have been made by various researchers and ones which focused intensity on these topics and will used in our system design and validations are 3 6 The main purpose of this paper is to study the effect of the cooling channels position and its cross section shape on the temperature Cooling system leads to minimum cooling time is not achieving uniform cooling throughout the mould C211 2008 Elsevier Ltd All rights reserved Effect of cooling system on the polymer during injection molding Hamdy Hassan Nicolas Regnier Cedric Lebot Cyril Laboratoire TREFLE Bordeaux1 UMR 8508 Site ENSCPB 16 Av Pey Berland 33607 Pessac article info Article history Received 15 November 2007 Accepted 19 August 2008 Available online 30 August 2008 Keywords Polymer Solidification Injection molding abstract Cooling system design is of is crucial not only to reduce ity of the final product A performed A cyclic transient of the mold cooling study cooling system design The ture distribution of the mold tivity of the process the cooling should be necessary for the Applied Thermal journal homepage www elsevi rights reserved Guy Defaye France importance for plastic products industry by injection molding because it cycle time but also it significantly affects the productivity and qual ical modeling for a T mold plastic part having four cooling channels is analysis using a finite volume approach is carried out The objective determine the temperature profile along the cavity wall to improve the of cooling channels form and the effect their location on the tempera the solidification degree of polymer are studied To improve the produc time should be minimized and at the same time a homogeneous cooling of the product The results indicate that the cooling system which and solidification at ScienceDirect Engineering dissipation of the heat through phase change process This tech plicit implicit technique already validated in previous studies by Vincent 8 and Le Bot 9 that is based on the technique New Source of Voller 10 This method proposes to maintain the nodes where phase change occurs to the melting temperature This solu tion is repeated until the convergence of the temperature with the source term equals to the latent heat The source term is discret ized by S c qL f of s ot qL f f n 1 s C0f n s Dt 5 The solid fraction which is function of the temperature is line arized as Nomenclature C P J kg K specific heat at constant pressure f s solid fraction h W m 2 K heat transfer coefficient K number of the internal iterations L latent heat of fusion J kg n number of the external iterations N normal direction S c source term T K temperature t s time H Hassan et al Applied Thermal Engineering nique is applied on fixed nodes and the energy equation in this case is represented as follow qC P oT ot r krT S c 2 And the source term S c is represented by S c qL f of s ot 3 where f s T 0 0 at TC31T f full liquid region 0C30 f s C301 at T T f iso thermal phase change region and f s T 1 at TC30T f full solid region On the whole domain the following boundary conditions are applied C0k oT oN h c T C0T c 2C 1 and C0k oT oN h a T C0T a 2C 2 4 3 Numerical solution The numerical solution of the mathematical model governing the behavior of the physical system is computed by finite volume method The equations are solved by an implicit treatment for qC P oT ot r krT 1 In order to take into account the solidification a source term is added to the energy equation corresponding to heat absorption or heat release 7 which takes in consideration the absorption or the the different terms of the equations system When we take in con sideration the solidification effect the energy equation is solved with a fixed point algorithm for the solid fraction For each itera tion of that fixed point we use discretization with time hybrid ex 0 2 0 4 0 2 0 004 0 03 0 004 P2 P3 P4 P1 P6 P7 P5 Exterior air free convection h a Cooling channels forced convection h f Fig 1 MoldstructurewithaT shapeproductandfourcoolingchannels Dim Inm Greek symbols k W m K thermal conductivity q kg m 3 density C 1 interior surface of the cooling channels C 2 exterior surface of the mold Subscripts a ambient air c cooling fluid f phase change 0 01 0 01 0 01 0 01 0 01 0 02 A1 A2 A3 A4 A5 A7 B1 B2 B3 B4 B5 B7 C1 C2 C3 C4 C5 D1 D2 D3 D4 D5 0 04 0 02 0 01 0 015 Polymer Fig 2 Different cooling channels positions Dim In m 29 2009 1786 1791 1787 f n k 1 K s f n k K s dF s dT C18C19 n k K T n k 1 K C0T n k K 6 Then we force the temperature to tend to the melting temper ature where the source term is not null by updating the source term S k 1 c S k c qC p T C0T f Dt 7 The energy equation is discretized as follow qC P Dt C0 qL f Dt dF dT C18C19 n k K T n k 1 K C0r krT n k 1 K qL f Dt f n k 1 K s C0f n s C0 qL f Dt dF dT C18C19 n k K T f qC P Dt T n 8 With dF dT C01 if 0 C30 f n k K s C30 1 and dF dT 0iff n k K s 0or1 9 This process allows differentiating the temperature field and so lid fraction calculated at the same instant and the linear system is solved by central discretization method 11 For each internal iter ation the resolution of that equation provides f n k 1 K s and T n k 1 K The convergence is achieved when the criteria of the solid fraction and temperature are verified by f n k 1 K s C0f n k K s C13 C13 C13 C13 C13 C13C302 f and T n k 1 K C0T n k K C13 C13 C13 C13 C13 C13C302 T 10 Further details on the numerical model and its validation are presented in 9 the horizontal direction between positions B2 and B5 or positions A2 and A5 which have the maximum solidification percent When we compare the solidification percent for different locations of the upper positions C and D we find that as the channel approaches to the product in the horizontal direction the solidification percent increases and the cooling rate increase rapidly compared with the effect of lower position We notice that the effect of the cooling channel position on the temperature distribution and solidification decreases as the cooling time augments to higher value and its ef 1788 H Hassan et al Applied Thermal Engineering 4 Results and discussion A full two dimensional time dependent mold cooling analysis in injection molding is carried out for a plate mould model with T shape plastic mold and four cooling channels as indicated in Fig 1 Due to the symmetry half of the mold is modeled and ana lyzed All the cooling channels have the same size and they have diameter of 10 mm each in case of circular channels The cooling operating parameters and the material properties are listed in Ta bles 1 and 2 respectively and they are considered constant during all numerical results 5 7 Each numerical cycle consists of two stages cooling stage where the cavity is filled with hot polymer initially at polymer injected temperature the ejection stage where the cavity is filled with air initially at ambient temperature Figs 3 and 4 show the cyclic transient variations of the mould tempera ture with time for 16 s mold cooling time at locations P1 P2 P3 P4 beside the mould walls and P5 to P7 inside the mould walls respectively Fig 1 and that in case of applied the solidifica tion and without applied solidification They are simulated for the first 30 cycles in case of circular cooling channels position A5 D3 as shown in Fig 2 We find that the simulated results are in good agreement with the transient characteristic of the cyclic mold tem perature variations described in 5 It is found that there is a slightly difference in temperatures values between the two results thus due to the difference in numerical method used and the accu racy in the numerical calculations The figures show that the rela tively temperature fluctuation is largest near the cavity surface and diminishes away from the cavity surface We find that the maxi mum amplitude of temperature fluctuation during the steady cycle can reach 10 C176C without applying solidification and 15 C176C in case of applying the solidification 4 1 Effect of cooling channels form An efficient cooling system design providing uniform tempera ture distribution throughout the entire part during the cooling pro cess should ensure product quality by preventing differential shrinkage internal stresses and mould release problems It also should reduce time of cooling and accelerate the solidification pro cess of the product to augment the productivity of the molding Table 1 Cooling operating parameters Cooling operating parameter Cooling operating parameter Coolant fluid temperature 30 C176C Ambient air temperature 30 C176C Polymer injected temperature 220 C176C Heat transfer coefficient of ambient air 77 W m 2 K Temperature of fusion of polymer 110 C176C Heat transfer coefficient inside cooling channel 3650 W m 2 K Latent heat 115 kJ Mold opening time 4 s kg process To demonstrate the influence of the cooling channels form on the temperature distribution throughout the mould and solidi fication process of the product we proposed three different cross sectional forms of the cooling channels circular square rectangu lar1 with long to width ratio of 0 5 and rectangular 2 with width to long ratio of 0 25 Two cases are studied first case all the cooling channels have the same cross sectional area and the second case they have the same perimeter The comparison is carried out for the same cooling channels position A5 D3 Fig 5 shows the solidification percent calculated numerically as the summation of the solid fraction of each element multiplied by the area of that element to total area of the product for differ ent forms with different cooling time The figure indicates that the effect of cooling channels form on the cooling rate decreases with increasing the cooling time It also shows that the cooling channel form rectangle 2 has the maximum solidification percent for case 1 and in case 2 the changing of the cooling channels form has not a sensible effect on the solidification percent The same results can be obtained when we compared the solidification in the prod uct and the temperature distribution though the mould for differ ent forms with the same cross sectional area at the end of the cooling stage for cooling time 24 s for cooling cycle 25 as shown in Figs 6 and 7 respectively The results indicate that the cooling process is improved as the cooling channels tend to take the form of the product 4 2 Effect of cooling channels position To investigate the effect of the cooling channels position we di vided the proposed positions into four groups groups A and B for different positions of the bottom cooling channel with a fixed po sition of the top cooling channel and with vice versa for groups C and D for the same cooling channel form circular as illustrated in Fig 2 Fig 8 represents the effect of different cooling channel positions on the of solidification percent at the end of 25th cooling cycle for groups A and B lower cooling channel effect C and D upper cool ing channel effect with cooling time It indicates that for lower cooling channel position effect the cooling rate increases and hence the solidification percent of the polymer increases as the cooling channel approaches the polymer in the vertical direction position B has solidification percent greater than position A and with the same positions C and D The figure shows also the most efficient cooling rate is obtained as the cooling channel takes the position between 20 and 50 through the product length for Table 2 Material properties Material Density kg m 3 Specific heat J kg K Conductivity W m K Mould 7670 426 36 5 Polymer 938 1800 0 25 Air 1 17 1006 0 0263 29 2009 1786 1791 fect on the cooling rate of the product is not the same for different positions Engineering 60 65 ab H Hassan et al Applied Thermal The solidification degree distribution through the product at the end of cooling stage at the end of cooling time 24 s and 25th cool ing cycle for different locations of cooling channel is shown in Fig 9 and the temperature distribution throughout the mould and the polymer at the same instant for different cooling channels Temperature o C Time s 0 200 400 600 30 35 40 45 50 55 P1 P2 P3 P4 Fig 3 Temperature history of the first 30 cycles at locations Time s 30 35 40 45 50 55 60 65 P5 P6 P7 ab Temperature o C 0 200 400 600 Fig 4 Temperature history of the first 30 cycles at locations Solidification percent Coolingperiod constant perimeter Coolinvgperiod constant area 16 1618202224262830 0 68 0 72 0 76 0 8 0 84 0 88 0 92 0 96 Circle Rectangle1 Rectangle2 Square Circle Rectangle1 Rectangle2 Square 30282624222018 Fig 5 Changing the solidification percent of the polymer part with cooling time for different cooling channel forms 70 75 29 2009 1786 1791 1789 position is shown in Fig 10 When we examine the solidification degree of the product and the temperature distribution throughout the mold for different positions we find that as the cooling channel position moves toward the products the homogeneity of the tem perature distribution throughout the polymer and the mold during Temperature o C Time s 0 30 35 40 45 50 55 60 65 P1 P2 P3 P4 600500400300200100 P1 to P4 a without solidification b with solidification Time s 30 35 40 45 50 55 60 65 70 75 P5 P6 P7 Temperature o C 0 200 400 600 P5 to P7 a without solidification b with solidification Fig 6 Solidification percent distribution through the product for different cooling channels forms a rectangular 2 and b circular having the same cross sectional area 3 8 4 0 4 0 4 0 4 2 4 2 4 5 45 4 5 4 5 4 5 5 0 5 0 5 0 5 5 55 60 6 0 5 65 70 70 80 80 9 90 X Y 0 0 05 0 1 0 15 0 2 0 0 05 0 1 0 15 0 2 35 35 3 7 37 3 8 3 8 38 4 0 4 0 4 0 40 4 2 42 4 2 4 2 4 2 5 45 4 5 4 5 45 5 0 5 0 55 55 60 60 65 65 70 70 809 X Y 0 0 05 0 1 0 15 0 2 0 0 05 0 1 0 15 0 2 ab Fig 7 Temperature distribution through the mould for different cooling channels forms a circular and b rectangular 2 having the same cross sectional area Time s Solidification percent 20 0 82 0 84 0 86 0 88 0 9 0 92 0 94 0 96 0 98 1 B1 D3 B2 D3 B3 D3 B5 D3 B7 D3 A1 D3 A2 D3 A3 D3 A5 D3 A7 D3 Solidification percent 0 82 0 84 0 86 0 88 0 9 0 92 0 94 0 96 0 98 1 B2 C1 B2 C2 B2 C3 B2 C5 B2 D1 B2 D2 B2 D3 B2 D5 3028262422 Time s 20 3028262422 ab Fig 8 Changing the solidification percent of the polymer part with cooling time for different cooling channel positions a lower cooling channel positions A and B and b upper cooling channel positions C and D Fig 9 Solidification percent distribution through the product for different cooling channels positions for cooling time 24 s and 25th cooling period a B7 D3 b B2 D3 c B2 C5 and d B2 C3 1790 H Hassan et al Applied Thermal Engineering 29 2009 1786 1791 37 3 8 3 8 38 4 0 4 0 4 0 4 2 4 2 2 4 2 45 45 4 5 4 5 4 5 5 0 5 0 5 0 50 60 60 7 70 8 80 90 90 100 100 110110Y 0 05 0 1 0 15 0 2 3 5 3 7 37 3 8 3 8 38 4 0 4 0 4 0 4 2 4 2 4 5 4 5 4 5 5 0 50 5 0 5 55 5 5 60 6 0 65 65 5 70 70 75 7 80 80 9Y 0 05 0 1 0 15 0 2 a b positions H Hassan et al Applied Thermal Engineering 29 2009 1786 1791 1791 the solidification process decrease for example positions B2 D3 and B2 C3 The figure indicates that as the channel approaches the product in the horizontal direction and vertical direction the temperature distribution throughout the polymer divided into two regions during the cooling process B7 D3 B2 D3 C5 B2 C3 B2 and thus has the same effect on the solidification pro cess These two areas of the temperature distribution and that dif ferent cooling rate through the cooling process lead to different severe warpage and thermal residual stress in the final product which affect on the final product quality 5 Conclusion The variation of the temperature of the mould through a num ber of molding cycles is carried out The simulated results are in good agreement with the transient characteristic of the cyclic mold temperature variations described in 5 and It is found that there is a slightly difference in temperatures values between the simulated results and those described in 5 The effect of cooling channels form and the effect of its position on the temperatures distribution throughout the polymer and the solidification of 7 4 2 X 0 0 0 20 150 10 05 Fig 10 Temperature distribution through the mould for different cooling channels the product are studied The results indicate that as the cooling channels take the form of the product the cooling rate is im proved The position of cooling channels has a great effect on the cooling process and temperature distribution through the mould and the polymer The results show that the cooling system layout which performs minimum cooling time not necessary achieves optimum temperature distribution throughout the prod uct and the system layout must be optimized to achieve the both goals References 1 S H Tang Y M Kong S M Sapuan
收藏
編號:7039345
類型:共享資源
大?。?span id="x9fnfl7" class="font-tahoma">3.62MB
格式:ZIP
上傳時間:2020-03-11
50
積分
- 關 鍵 詞:
-
插座
零件
塑料
注塑
模具設計
- 資源描述:
-
插座零件塑料注塑模具設計,插座,零件,塑料,注塑,模具設計
展開閱讀全文
- 溫馨提示:
1: 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
2: 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
3.本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
5. 裝配圖網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
裝配圖網所有資源均是用戶自行上傳分享,僅供網友學習交流,未經上傳用戶書面授權,請勿作他用。