數控車床進給部件及網絡通信系統設計

數控車床進給部件及網絡通信系統設計,數控車床,進給,部件,網絡,通信,通訊,系統,設計 摘要：本論文介紹了數控系統技術及其DNC通信技術的應用現狀和發展趨勢，了解了數控車床典型的結構設計和進給部件的特點。本論文著重對數控車床的進給系統進行了方案的論證、結構的比較和分析，并設計完成了EX-106數控車床的進給系統及其零部件，且對主要的進給軸和零部件進行了強度和剛度的校核、使用壽命的計算和零部件精度的分析。論文對數控系統的DNC通信系統進行了硬件和軟件的方案比較、分析，并完成了數控系統的DNC通信系統的硬件和軟件的設計，并對實驗的結果進行了分析。論文還介紹了基于反求工程的CAD/CAM/DNC集成技術，詳細敘述了反求工程含義和流程，敘述了CAD/CAM/DNC反求工程相對于傳統反求工程優勢，完成了反求工程實例圖解。 關鍵詞：數控系統 DNC通信系統 EX-106 進給部件 反求工程 Abstract: This thesis introduced a number to control system technique and its DNC correspondence technical of applied present condition and development trend, understand number control the structure design of lather typical model and enter to the characteristics of parts. This thesis emphasizes the comparison of[with] argument, structure that the logarithms controlled lather to enter to carry on a project to the system and analyzes, and designed to complete EX-106 number control lather to enter zero parties to the system and it, and to entered mainly to carry on strength to the stalk and zero parties with just pit, the calculation of the service life and the analysis of the zero parts accuracy in the school of degree. The thesis logarithms controls the project comparison that the DNC correspondence system of system carried on hardware and software, analytical, and completed a number to control the correspondence hardware of the system and the design of the software of the DNC of system, and to experiment of carried on analysis as a result. The thesis still introduced according to anti- to the integration technique of the CAD/CAM/DNC of engineering, described in detail anti- to engineering meaning and process, described CAD/CAM/DNC anti-to engineering opposite in tradition anti- to engineering advantage, complete anti- to engineering a solid example an illustrated manual table. Key Words: Numerical control system. Correspondence system of DNC. EX-106. Enter to the parts. Anti-to engineering