購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。。【注】:dwg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
大連水產(chǎn)學院畢業(yè)設計 摘要
摘 要
本文首先對零件的作用和工藝性進行了分析.
然后詳細介紹了零件加工工藝過程的制定:1,定位基準的選擇。2,制定加工工藝路線。3,選擇加工設備及工藝裝備。4,確定切削用量及基本工時。
最后介紹了夾具的設計及計算,包括零件本工序的加工要求分析,確定夾具類型,擬定定位方案和選擇定位元件確定夾緊方案確定對刀裝置。
關鍵詞:加工工藝規(guī)程,定位基準,切削用量,夾具夾緊方案確定
Ⅰ
Abstract
This article first has carried on the analysis to the components function and the technology capability.
Then in detail introduced the components processing technological process formulation: 1, localization datum choice.2, formulation processing craft route.3, selective treatment equipment and craft equipment.4, determination cutting specifications and basic man-hour. Finally introduced the jig design and the computation, including the components this working procedure processing request analysis, the definite jig type, draws up the localization plan and the preferred orientation part determination clamp plan determination to the knife installment.
Key word: Processing technological process, localization datum, cutting specifications, jig clamp plan determination
Ⅱ