【溫馨提示】====【1】設計包含CAD圖紙 和 DOC文檔,均可以在線預覽,所見即所得,,dwg后綴的文件為CAD圖,超高清,可編輯,無任何水印,,充值下載得到【資源目錄】里展示的所有文件======【2】若題目上備注三維,則表示文件里包含三維源文件,由于三維組成零件數量較多,為保證預覽的簡潔性,店家將三維文件夾進行了打包。三維預覽圖,均為店主電腦打開軟件進行截圖的,保證能夠打開,下載后解壓即可。======【3】特價促銷,,拼團購買,,均有不同程度的打折優惠,,詳情可咨詢QQ:1304139763 或者 414951605======【4】 題目最后的備注【GC系列】為店主整理分類的代號,與課題內容無關,請忽視
大學本科生畢業設計
摘 要
雕刻機制作工藝日漸成熟,應用范圍也日漸廣泛。大到樓房建筑的裝飾,小到商店門前的招牌,乃至很多產品的標識銘牌,可謂雕刻的使用范圍無處不在。但雕刻機的價格均比較高,為了提高其普及率,設計開發一個經濟、簡練的機械運動系統是很具有重要的理論意義和實用價值的。
本文簡要地介紹了雕刻機的起源和發展現狀,分析了國內外同類雕刻機的特點,說明了雕刻機的功能和使用范圍。綜合運用機械設計制造和加工工藝等知識,提出了簡化雕刻機運動系統的設計思路。其次,討論和確定了本雕刻機的總體結構布局。本雕刻的運動系統包括了主運動系統和進給運動系統。其主運動系統采用電機直接接刀具,省去中間傳動,而進給運動系統是采用步進電機帶動滾珠絲杠使部件在導軌上平移來實現三軸聯動。再次,對主電機的選用、滾珠絲杠、步進電機以及導軌等主要零部件進行了詳細的設計與計算。本雕刻機有著安裝方便,結構簡單、新穎,制造成本低等優點,可用于中小型雕刻機,對雕刻機價格具有一點的影響。
關鍵詞:雕刻機,運動系統,三維
ABSTRACT
Production technology of engraving machine has become mature and widely been used in many fields. The sculpture technology is used in the construction of the building decoration, small signs in front of the store, many products and logo nameplate. But the price of engraving machine is high; to be able to increase its penetration rate, design a mechanical system which is cheaper and brevity has a very important theoretical and practical value.
This article briefly introduced the origin and the state-of-the –art of the engraving machine, analysed the similar characteristics of sculpture both at home and abroad, explained the functions and scope of use of the engraving machine. Firstly,a motion system design ideas was got by comprehensive using the knowledge such as mechanical design and manufacturing and processing technology. Secondly, the carving of the layout of the engraving machine are discussed and identified. The movement system of the sculpture, including the main movement system and feed movement.The main campaign directly to the electrical system used knives, eliminating the middle transmission, and the Progressive Movement system is used to the stepper motor driven ball screws so that components in the rails On the pan to achieve three-axis linkage. Finally, Selection of the main motor, ball screw, the stepper motor and rails, and other major components of a detailed are designed and calculationed. The engraving machine is easy to install, simple structure, new, and low cost manufacturing, can be used for small and medium-sized carving machine, the engraving machine with little impact on prices.
Key words: engraving machines, motor system, 3D
目 錄
摘 要 - 0 -
目 錄 - 2 -
第一章 緒論 - 4 -
1.1 雕刻機的概述 - 4 -
1.2設計研制的雕刻機的特點 - 4 -
1.3研制的雕刻機功能及使用范圍: - 5 -
第二章 系統分析與方案的訂制 - 6 -
2.1三維雕刻機的設計參數 - 6 -
2.2雕刻機總體方案選擇 - 7 -
2.2.1總體布局要求[2] - 7 -
2.2.2總體方案確定 - 8 -
2.3雕刻機運動系統方案設計 - 8 -
2.3.1坐標系統的確定[2] - 9 -
2.3.2總體結構 - 10 -
2.3.3主運動方案 - 10 -
2.3.4進給運動方案 - 10 -
第三章 主運動系統的設計及校核 - 11 -
3.1銑削力、扭矩和功率的計算[3][4] - 11 -
3.2鉆削力、扭矩和功率的計算[5] - 12 -
3.3主運動系統的設計 - 14 -
3.3.1主運動系統的方案[6] - 14 -
3.3.2主軸電機的設計計算[6][7] - 14 -
第四章 進給運動系統設計計算 - 16 -
4.1 Z方向進給運動系統設計 - 16 -
4.1.1 Z方向進給運動系統組成 - 16 -
4.1.2滾珠絲杠副的設計計算[8][9][10] - 16 -
4.1.3滾珠絲桿的校核 - 21 -
4.1.4 Z方向進給電機的設計計算[11] - 24 -
4.1. 5聯軸器的選擇 - 25 -
4.1. 6 Z方向直線導軌副的設計計算[12] - 26 -
4.2 X方向進給運動系統設計 - 27 -
4.2.1 X方向進給運動系統組成 - 27 -
4.2.2滾珠絲杠副的設計計算[8][9][10] - 28 -
4.2.3滾珠絲桿的校核 - 31 -
4.2.4 X方向進給電機的設計計算[11] - 33 -
4.2.5聯軸器的選擇 - 35 -
4.2.6X方向直線導軌副的設計計算[12] - 35 -
4.3 Y方向進給運動系統設計 - 36 -
4.3.1 Y方向進給運動系統組成 - 36 -
4.3.2滾珠絲杠副的設計計算[8][9][10] - 36 -
4.3.3滾珠絲桿的校核 - 39 -
4.3.4 Y方向進給電機的設計計算[11] - 42 -
4.3.5聯軸器的選擇 - 43 -
4.3.6Y方向直線導軌副的設計計算[12] - 43 -
4.4 雕刻機設計參數的確定 - 44 -
結 論 - 45 -
參考文獻 - 46 -
致 謝 - 47 -
本科畢業設計(論文)資料 - 48 -