購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載就能得到。。。【注】：dwg后綴為CAD圖，doc,docx為WORD文檔，有不明白之處，可咨詢QQ:1304139763
摘要 摘要 本文的主要內容是通過分析清障車后翼板的工藝 對清障車后翼板的成型工藝 進行對比確定分析 在成型工藝分析的基礎上合理選擇成型工藝方法和彎曲成型模 具類型 進而進行彎曲成型模具的設計 本文首先對零件的工藝性進行了分析 根 據零件的工藝性確定了成型工藝方案以及模具類型 根據確定好的成型工藝方案和 模具類型對成型工藝參數和模具的工作尺寸進行了詳細的計算校核 接著根據工藝 參數對壓力機進行了選擇確定 最后對成型模具進行設計繪制并在做了總結 關鍵詞 后翼板 成型工藝 彎曲模 模具設計 摘要 Abstract The main content is that through the process analysis of the After Empennage of Road block Removal Trucks determining and contrasting the forming process Basising on the analysis of the forming process reasonably choice the method of forming process and bending die type then designing the forming of bending die In this paper the process of the parts were first analyzed according to the process of the parts the programmer of forming process and die type was determined according to the established programme of forming process and die type a detailed calculation checking for the parameters and die size of the work was carried out then according to the process parameters the Press was confirmed Finally the forming die was designed and drawn and a concluding was made Key words After Empennage Forming process Bending die Die design